John Lewis Wilton 803/42903 User manual

John Lewis
Wilton 135cm Bedstead
Double
Stock number natural: 803/42903
Stock number white: 803/42421
Stock number dark: 803/42521
For product support or spare parts
please call the John Lewis Helpline;
Tel:01244 - 689949
e-mail:[email protected]
1/5
Pre-assembly Preparation
Please ensure instructions are read in full before attempting to assemble this product.
Necessary Tools
Please check the pack contents before attempting to assemble this product. A full checklist of
components is given in this leaflet. If any components are missing, please contact the John Lewis Helpline.
This product takes approximately 40 MINUTES to assemble with 2 PEOPLE.
The fittings pack contains SMALL PARTS which should be KEPT AWAY FROM YOUNG
CHILDREN.
Read this leaflet in full before commencing assembly.
If you require any additional information or have any issues with this product please call the John Lewis
Helpline on 01244 - 689949 or e-mail: [email protected]
This product is HEAVY. It should be assembled as near as possible to the point of use. TAKE CARE
WHEN LIFTING to avoid personal injury and (or) damage to the product.

1020 x 1440mm
460 x 1440 mm
1366mm
1900 x 115mm
70 x 1938mm
A B
C
(4mm)
M8 bolt x 8
(15mm)
(30mm)
2/5
Fittings and parts checklist
Fittings
Allen key x 1
Screw x 6
Bedstead parts
1 - Headboard x 1 2 - Footboard x 1
3 - Side rail x 2
4 - Centre rail x 1
5 - Slats x 1

A
3
2
3
B
3
3
1
B
B
B
B
Step by step assembly instructions
3/5
Step One
Attach the Side Rails (3) to the Footend (2) using Bolts M8 (B) and hand-tighten bolts to loosely secure
parts together. Do not tighten with Allen Key (A) until you have inserted the Centre Rail in Step Three.
LOOSELY SECURE PARTS
TOGETHER IN ORDER FOR
CENTRE RAIL TO FIT IN
STEP THREE
Step Two
Attach the Side Rails (3) to the Headend (1) using Bolts M8 (B) and hand-tighten bolts to loosely secure
parts together. Do not tighten with Allen Key (A) until you have inserted the Centre Rail in Step Three.
LOOSELY SECURE PARTS
TOGETHER IN ORDER FOR
CENTRE RAIL TO FIT IN
STEP THREE
B
B

4
1
3
3
2
4/5
Step Three
Slot the Centre Rail into the brackets on the Headboard (1) and Footboard (2). You can now
tighten the bolts with the Allen Key (A) at the Side Rails from the previous steps so all fastenings
are now tightened.
AFTER INSERTING CENTRE
RAIL, TIGHTEN ALL FIXINGS
FULLY INCLUDING BOLTS
AT SIDE RAILS (FROM
STEPS ONE AND TWO)
Step Four
Fix the Slats (5) to the Side Rails (3) and secure the top, bottom and centre slat with Screws 30mm (C).
This bed is now ready to use.
C
C
C
C
C
C

5/5
Care and Maintenance
Safety Instructions
Wood Furniture
Wood displays different grain patterns depending on which way they cut - for example, the 'medullary ray'
which can appear on oak furniture is a mark of good quality timber - these are just characteristics of the
natural beauty of the wood. Some furniture is also deliberately aged and rustic.
Wood veneers also allow distinctive patterns to be created on flat surfaces, such as table tops and drawer
fronts by the way the slivers are arranged.
All timber surfaces will change colour and mellow over time. New furniture will initially vary in shade from
items that have been previously purchased.
How to care for your wood furniture
Furniture with a hard lacquer, wax polish or painted surface should be dusted with a dry cloth.
Waxed furniture will need to be given a coat of beeswax a couple of times a year to help maintain its lustre.
Spray polishes are best avoided as they contain silicones which may spoil the furniture's surface by building
up over time.
Our furniture will endure most temperatures in the home but it is best to avoid placing furniture next to heat
sources such as radiators or fires. Be particularly careful with solid wood as the lack of humidity caused by
central heating can cause damage such as warping.
Never drag furniture when moving it. Always lift it.
Periodically check all fixings to ensure none have come loose and re-tighten where necessary.
Please take care when handling or moving the furniture as careless handling may cause damage or injury.
Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent adult.
No liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture. During
assembly children should be kept away from the product due to possible risk of injury. Do not use this item if
any components are missing or damaged.
It is recommended that before moving heavy objects to a new location they are completely dis-assembled to
avoid personal injury or damage to the furniture. Please be careful to retain all fittings when doing this.
If you require any additional information or have any issues with this product please call the John
Lewis Helpline on 01244 689949 or email [email protected]
John Lewis Partnership 171 Victoria Street, London, SW1E 5NN.
www.johnlewis.com
This product complies with BS EN 1725:1998.