John Lewis 83601801 User manual

H76 W200 D95 cm
YNG TAL 14 / ARMT1 D: 23.12.2019 / RN000
Arc Metal Table
Stock Number: 83601801

Thank you for purchasing the Arc Metal Table. Please read the instructions and warnings carefully before use, to
ensure safe and satisfactory operation of this product.
At John Lewis, we are committed to making great products possible.
From our in-house Design Team, to our Buyers, we work together to bring great design to life.
Our expert Product Technologists work collaboratively with our buyers and suppliers to assure the legality, safety
and quality of the product we sell.
We are all committed to designing and developing products to the highest industry standarts.
We hope you are happy with your product and welcome any feedback or comments you may have.
The John Lewis Team
1
Time to assemble
30 minutes
People to assemble
Tools Required

2
Important safety information
Warnings
The product should only be used on firm, level ground.
Keep small parts ot of reach of children.
Ensure the product is fully assembled as illustrated before use.
Do's
Check the pack and make sure you have all the parts listed.
Check all screws or bolts are tightened and inspect regularly.
Make sure the legs remain in contact with the ground at all times.
Dont's
Do not over tighten screws or bolts.
Do not stand on the product.
Don not use power tools to construct as overtightening and panel failure may occur.

3
Your Dining Table
Ref
1
1
Dimensions Qty
H3 W200 D95 cm
H73 W38 D7 cm
1
Description
2
2
2
2
Top Panel
Leg A
3
3
3
2
H73 W38 D7 cm
Leg B
4
4
1
H7 W115 D3 cm
Bottom Rail

4
Fixtures and fittings
Fixtures and fittings
supplied (actual size)
Ref Description Dimensions Qty
Fixtures and fittings
supplied (not actual size)
Ref Description Dimensions Qty
B1
Allen Key M4
A6mm x 30mm 12
Allen Head Bolt (Black)

5
Step 1
Parts, fittings and tools
1
1
A
Step 2
Parts, fittings and tools
A
A
A
A
2
2
2
2
2
B
B
B
3
3
3
3
3
4
4
Product assembly
Arc Metal Table
83601801
Attach legs to the middle rail loosely by using allen key.
Attach the leg frame to the top panel by matching corresponding holes.

6
B
Step 3
Parts, fittings and tools
A
Arc Metal Table
83601801
A
A
A
A
AA
B 1
Fix the bolts to the holes loosely and tighten all the loosely-attached bolts
(including the ones in Step1) at last.
1
AA

7
Safety Instructions
General warnings
Never drag furniture when moving it, always lift it. Periodically check all fixings to ensure none have come loose and
re-tighten where necessary. Please take care when handling or moving the furniture as careless handling may cause
damage or injury. Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent
person. No liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture.
Specific warnings for heavy items
It is recommended that before moving heavy objects to a new location they are completely dis-assembled to avoid
personal injury or damage to the furniture. Please be careful to retain all fittings when doing this. (For fully or partial
assemble items).
Care Instructions

Wood Furniture
Wood displays dierent grain patterns depending on which way they cut - for example, the ‘medullary ray’ which can
appear on oak furniture is a mark of good quality timber - these are just characteristics of the natural beauty of the
wood. Some furniture is also deliberately aged and rustic.

All timber surfaces will change colour and mellow over time. New furniture will initially vary in shade from items that
have been previously purchased.

Metal
Do not use any abrasive cleaner or harsh detergent as this can damage the surface.

Your feedback is very important to us and we would love to hear your comments on your new furniture. Please
visit our website to leave a review.Thank you.
Retain these instructions for future reference.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com