John Lewis Clayton 836 User manual

76H 90W50Dcm
CLAYTON DROP
LEAF TABLE
Stock number: 836 / 30760 , 40760

20 Minutes
Thank you for purchasing the Clayton table. Please read the instructions and warnings carefully before use,
to ensure safe and satisfactory operation of this product.
At JohnLewis, we are committed to making great products possible.
From our in-houseDesign Team, to our Buyers, we work together to bring great design to life.
Our expert ProductTechnologists work collaboratively with ourbuyers and suppliers to assure thelegality,
safety and quality of the productwe sell.
We are all committed to designing and developing products to the highest industry standards.
We hope you are happy with yourproduct and welcome any feedback or comments you may have.
The John Lewis Team
le
lle

8LITVSHYGXWLSYPHSRP]FIYWIHSR½VQPIZIPKVSYRH
Keep small parts out of reach of children .
Ensure the product is fully assembled as illustrated before use.
Check the pack and make sure you have all the parts listed.
Check ali screws or bolts are tightened and inspect regularly.
Make sure the legs remain in contact with the ground at all times.
Do not over tighten screws or bolts.
Do not stanci on the product.
Do not use power tools to construct as overtightening and panel failure may occur.

Table top
Your LAYTONC
table
ableToverallsize: 6H7 W90 D50 cm
Internal dimensions
Stock number:
1
1
1
2
Pedestal base
2
Wooden slides
3
2
33

Screw
Fixtures and fittings
supplied (actual size)
Fixtures and fittings
supplied (not actual size)
80
A
6
Washer 6
B
Allen key 1
C
Feld pads 4
D

2
2
3
3
2
2
3
3
Clayton
7603,076040
table
1
5
2
3
Please
base. the on slot
and runner coloured correctly
the match to care take

A
A
B
B
C
C
2
2
3
2
2
3
3
3
3
3
3
4
6
laytonC
07604
07603,
table
D
DD
D
D

5
6
7
laytonC 0760407603,table

Care guide
Care and maintenance
Wood furniture
Wood displays different grain patterns depending on which way they cut - for example, the ‘medullary ray’ which
can appear on oak furniture is a mark of good quality timber - these are just characteristics of the natural beauty
of the wood. Some furniture is also deliberately aged and rustic.
Wood veneers also allow distinctive patterns to be created on flat surfaces, such as table tops and drawer fronts
by the way the slivers are arranged.
All timber surfaces will change colour and mellow over time. New furniture will initially vary in shade from items
that have been previously purchased.
How to care for your wood furniture
Furniture with a hard lacquer, wax polish or painted surface should be dusted with a dry cloth.
Waxed furniture will need to be given a coat of beeswax a couple of times a year to help maintain its luster.
Spray polishes are best avoided as they contain silicones which may spoil the furniture’s surface by building up
over time.
Make sure all surfaces are protected from heat and liquids by mats and coasters. Wipe up spills immediately and
ensure that a mat or pad is placed under paper if you are writing.
Extendable dining tables should be left extended for the first few months to avoid an uneven appearance.
Likewise, lamps and ornaments should also be moved regularly.
Our furniture will endure most temperatures in the home but it is best to avoid placing furniture next to heat
sources such as radiators or fires. Be particularly careful with solid wood as the lack of humidity caused by central
heating can cause damage such as warping
Protect surfaces from scratches and marks by using mats and coasters.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
John Lewis Partnership
171 Victoria Street
London SW1E SNN
johnlewis.com