John Lewis Essence 803/14012 User manual

John Lewis
Essence Oak 2 door wardrobe
Thank you for purchasing this Essence oak 2 door wardrobe. lease read the instructions
carefully before use to ensure safe and satisfactory operation of this product
Stock number: 803/1 401 2
re-assembly preparation
lease ensure instructions are read in full before attempting to assemble this product
Necessary Tools
You will require a cross head screwdriver to assemble this product. An electric drill may cause
damage to the product and is not recommended.
lease check the pack contents before attempting to assemble this product. A full checklist of
age 1 of 8

Fittings and parts checklist
A
B
C
D
E
F
G
age 2 of 8
components is given in this leaflet. If any components are missing, please contact your local
John Lewis Branch.
This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE
CARE WHEN LIFTING to avoid personal injury and (or) damage to the product. Always lift the
unit from the base when moving it, do not drag along the ground. A minimum of two people
should move the unit.
It is strongly recommended you place a protective cloth, or flattened cardboard box, on your
carpet and then assemble the wardrobe on top of it. This procedure will prevent your carpet
from being marked.
This product takes approximately 70 MINUTES to assemble with 2 EO LE.
The fittings pack contains SMALL ITEMS which should be KE T AWAY FROM YOUNG
CHILDREN.

3
2

H x 2
H
H

One or more persons lift up the front section (F) with the hinges on the inside and the
front inside rail with the 4 screw holes is at the bottom and place onto the top of the
base unit. ush the front up against the sides (D) & (E) so there is no gap between
the vertical ends of the front panel and the side panels. After the front has been
located the person standing at the front should hold the sides and front together by
holding the palms of their hands on the sides of the front section (F) and
fingers on the sides (D) & (E) whilst the person at the back
screws the front onto the sides by first screwing in the top 2
screws (H) then the
bottom 2 (H). Once
these 4 screws are
fixed, the person at
the front can let go and
the remaining 4
screws (H) can be
Step Two
H
H
H
age 5 of 8
Step Three Secure the bottom of the door frame using 4 x 30mm screws (H).
Attach 2 x Handles (K) using 1 x 25mm Bolt (I) for each handle. Fit the
Hanging rail (G) into its cradle.
Fittings
H x 4 H
I x 2
K x 2
G
IK
Fittings
H x 8
H H H I
K
H
H
H
HH
D
E
F

2
Hx6
H
H
8
2in the front two corners and 6x30mm
screws(H) ensuring the cornice runs around the front and 2 sides.
8

Step Six Check that the doors are aligned correctly and if necessary adjust the
door hinges as shown below. Check that the magnets hold the door
closed and that the doors are aligned correctly as shown below.
age 7 of 8
Vertical Hinge Adjustment Horizontal Hinge Adjustment Lateral Hinge Adjustment
Horizontal Magnetic Catch
WALL FIXING STRA
Your Spirit wardrobe is supplied with a Wall Fixing Strap, the fitting of which is
optional. Attach one end of the Wall Fixing Strap to the top of the wardrobe with
the scew provided and the other end should be attached to the wall by a
competant person.

Care and Maintenance
The Essence range has been sourced by John Lewis from the finest American Oak and each
piece has been carefully constructed to ensure it will give you years of pleasure. The natural
characteristics of this oak range may include small cracks, knots, blemishes and grain pattern
variations which all add to the natural charm and beauty of this furniture product. Each piece is
unique, and for this reason no two pieces within the range will perfectly match, however there
will be harmony between all the pieces you may have purchased.
age 8 of 8
Wood Furniture
How to care for your wood furniture
Try to avoid prolonged exposure to direct sunlight as this may alter the colour and tone of your
furniture over time.
Any spillages that do happen should be wiped up immediately with a clean dry lint free cloth to
avoid marking the surface of the furniture.
Safety Instructions
Never drag furniture when moving it, always lift it.
eriodically check all fixings to ensure none have come loose and re-tighten where necessary.
lease take care when handling or moving the furniture as careless handling may cause
damage or injury.
Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a
competent person. No liability will be accepted for damage or injury caused by incorrectly
General warnings:
Specific warnings for heavy items:
It is recommended that before moving heavy objects to a new location they are completely dis-
assembled to avoid personal injury or damage to the furniture. lease be careful to retain all
fittings when doing this.
LEASE KEE THESE INSTRUCTIONS FOR FUTURE REFERENCE
John Lewis artnership 1 71 Victoria Street London SW1 E 5NN
www.johnlewis.com