John Lewis Cotswold User manual

John Lewis
Stock number: 813/41005
Thank you for purchasing this Cotswold Trolley. Please read the instructions carefully before use
to ensure safe and satisfactory operation of this product.
Pre-assembly preparation
Please ensure instructions are read in full before attempting to assemble this product.
Necessary Tools
Please check the pack contents before attempting to assemble this product. A full checklist of components
is given in this leaflet. If any components are missing, please contact the branch from whom you bought
this product.
This product is HEAVY, it should be assembled as near as possible to the point of use.
TAKE CARE WHEN LIFTING to avoid personal injury and (or) damage to the product.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN.
Read this leaflet in full before commencing assembly.
This product takes approximately
40 MINUTES
to assemble and requires two people.
Cotswold Trolley
1

M N O P Q
R S T U
A x 1
B x 1
C x 1
D x 1
E x 1
F x 1
G x 1
H x 1
I x 1
J x 1
K x 1
L x 1
Bottom Drawer
Front Drawer
Right Drawer
Left Drawer
Back Drawer
Left Side Panel
Right Side Panel
Back Panel
Rail
Parts Checklist
Top Panel
Bottom Shelf
Middle Shelf
KD Screw x 6 pcs.
16 pcs. + 1 pc. Spare
Allen Key x 1 Long Screw x 8 Castor x 2 Locking Castor x 2
Handle x 1 Short Screw x 2 Bolt x 16 Cam Lock x
Fittings Checklist
2
A
G
F
D
E
B
C
H
J
I
T
M
U

Lay
Left Side (D), Right Side (E), Back Panels (F), Bottom Shelf (B)
and
Rail (G)
on the
smooth surface or on the carton
Fix
16 x Cam Lock (P)
to
D, E, F, B, & G
tighten by Cross Head Screw Driver (not provided).
Fix
16 x Bolt (O)
to
Right Side (D) & Left Side Panels (E)
and
Top Panel (A)
by using Cross
Head Screw Driver.
Step by step assembly instructions
1
2
3
D
E
B
G
F
P
D
OE
A

Attach
Bottom Shelf (B), Back Panel (F),
and
Rail (G)
to
Left Side Panel (D)
by using the Cross
Head Screw Driver to turn the
Cam Lock (P)
clockwise as shown in the diagram.
Attach
Middle Shelf (C)
to
Left Side Panel (D)
fix by using
2 x KD Screw (Q)
tighten by
Allen
Key (R)
(provided).
Attach Right Side Panel (E) to Bottom Shelf (B), Back Panel (F), Rail (G) and Middle
Shelf (C) by using the Cross Head Screw Driver tighten Cam lock (P) turn clockwise as diagram shown
.
Fix Middle Shelf (C) to Left Side Panel (D) by using 2 x KD Screw (Q) tighten by Allen Key (R).
3
4
R Q
B
GCF
D
R
Q
E
4
B
G
C
F

Attach
2 x Castor (T)
and
2 x Locking Castor (U)
to
Left (D) & Right (E) Side Panels
.
Using two people turn the Trolley upright.
Attach Top Panel (A) as shown by using the Cross Head Screw Driver turn Cam Lock (P) clockwise at
Left (D), Right (E) Side Panels and Back Panel (F) .
Fix Rail (G) to Top Panel (A) fix by using 2 x KD Screw (Q) tighten by Allen Key (R) .
5
5
6
T
U
R
Q
A

Attach
Front (H), Right (I), Left (J), Back (K), Bottom (L) Drawers
together by using
8 x Long
screw (S)
tighten by Cross Head Screw Driver.
Attach
1x Handle (M)
by using
2 x Short screw (N)
tighten by Cross Head Screw Driver.
Put the drawer in place as shown in diagram.
7
8
H
MJ
K
I
S
N
6

Wood Furniture
Wood displays different grain patterns depending on which way they cut, these are just characteristics of the
natural beauty of the wood. Some furniture is also deliberately aged and rustic.
Wood veneers also allow distinctive patterns to be created on flat surfaces, such as side apron, by the way
the slivers are arranged.
All timber surfaces will change colour and mellow over time. New furniture will initially vary in shade from
items that have been previously purchased.
How to care for your wood furniture
This trolley should be cleaned using a soft damp cloth and dried immediately.
Do not use a very wet cloth or allow any liquid to contact with the trolley for a long period of time as this can
permanently damage the surface especially any hot water.
Do not use any abrasive cleaner or harsh detergent as this can damage the surface of the trolley.
Do not drag any object across the trolley as this can cause permanent damage.
Our furniture will endure most temperatures in the home but it is best to avoid placing furniture next to heat
sources such as radiators or fires. Be particularly careful with solid wood as the lack of humidity caused by
central heating can cause damage such as warping.
Never drag furniture when moving it, always lift it.
Periodically check all fixings to ensure none have come loose and re-tighten where necessary.
Please take care when handling or moving the furniture as careless handling may cause damage or injury.
Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent person.
No liability will be accepted for damage or injury caused by incorrectly insalled or assembled furniture.
This product complies with BS 4875-5: 2001
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
John Lewis Partnership 171 Victoria Street, London, SW1E 5NN
www.johnlewis.com
Care and Maintenance
Safety Instructions
7

Stock number: 813/41005
Please check the pack contents before attempting to assemble this product. A full checklist of components
1

KD Screw x 6 pcs.

.

Wood displays different grain patterns depending on which way they cut, these are just characteristics of the
Wood veneers also allow distinctive patterns to be created on flat surfaces, such as side apron, by the way
All timber surfaces will change colour and mellow over time. New furniture will initially vary in shade from
Do not use a very wet cloth or allow any liquid to contact with the trolley for a long period of time as this can
Our furniture will endure most temperatures in the home but it is best to avoid placing furniture next to heat
sources such as radiators or fires. Be particularly careful with solid wood as the lack of humidity caused by
Please take care when handling or moving the furniture as careless handling may cause damage or injury.
Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent person.