Johnson Controls PG9200AX User manual

D-308403 29011054R001 PG9200AX 1
User manual
PG9200AX
Wireless photoelectric beam detector
English...........................................................................................................................................................4
Detector features.........................................................................................................................................5
Introduction .................................................................................................................................................5
Safety information.......................................................................................................................................5
Warnings .................................................................................................................................................5
Box contents ...............................................................................................................................................6
Accessories.............................................................................................................................................6
Parts identification...................................................................................................................................6
Ordering detector batteries......................................................................................................................6
Disassembling the device........................................................................................................................8
Enrollment...................................................................................................................................................9
Compatible panels...................................................................................................................................9
Enrolling the device.................................................................................................................................9
Mounting ...................................................................................................................................................10
Mounting on a wall.................................................................................................................................11
Mounting on a pole................................................................................................................................12
Mounting a second detector in the opposite direction on a pole ...........................................................13
Device settings..........................................................................................................................................15
Switch functions.....................................................................................................................................15
Setting the 4-channel beam frequency selector ....................................................................................16
Optical Alignment......................................................................................................................................18
Alignment angles...................................................................................................................................18
Aligning the device ................................................................................................................................18
Testing the device.....................................................................................................................................20
LED Indication.......................................................................................................................................20
Troubleshooting.....................................................................................................................................20
Battery saving timer .................................................................................................................................21
Replacing batteries ...................................................................................................................................21
Optional settings .......................................................................................................................................22
Dimensions ...............................................................................................................................................23
Specifications ...........................................................................................................................................23
Compliance with standards.......................................................................................................................24
Limited Warranty.......................................................................................................................................25
Français.......................................................................................................................................................29
Détecteur à faisceau photoélectrique sans fil ...........................................................................................29

2 D-308403 29011054R001 PG9200AX
Caractéristiques du détecteur ...................................................................................................................29
Introduction ...............................................................................................................................................29
Consignes de sécurité...............................................................................................................................29
Avertissements......................................................................................................................................29
Contenu du carton.....................................................................................................................................29
Accessoires...........................................................................................................................................30
Identification des pièces........................................................................................................................30
Commandes de piles pour le détecteur.................................................................................................30
Démontage de l’appareil........................................................................................................................31
Enregistrement..........................................................................................................................................32
Centrales compatibles...........................................................................................................................32
Enregistrement de l’appareil..................................................................................................................32
Montage de l’appareil................................................................................................................................34
Fixation du détecteur contre un mur......................................................................................................35
Fixation du détecteur sur un montant....................................................................................................37
Fixation d’un deuxième détecteur sur un montant dans la direction opposée.......................................38
Réglages de l’appareil...............................................................................................................................39
Fonctions des interrupteurs...................................................................................................................39
Réglage du sélecteur de fréquence de faisceau 4 canaux....................................................................40
Alignement optique ...................................................................................................................................42
Angles d’alignement ..............................................................................................................................42
Test de l’appareil ...................................................................................................................................44
Voyants LED..........................................................................................................................................44
Dépannage............................................................................................................................................44
Minuterie d’économie des piles.................................................................................................................45
Remplacement des piles.......................................................................................................................45
Paramètres facultatifs ...............................................................................................................................46
Dimensions ...............................................................................................................................................47
Spécifications............................................................................................................................................47
Conformité aux normes.............................................................................................................................48
Garantie limitée.........................................................................................................................................49
Español........................................................................................................................................................53
Detector de haz fotoeléctrico inalámbrico.................................................................................................53
Características del detector ......................................................................................................................53
Introducción...............................................................................................................................................53
Información sobre seguridad.....................................................................................................................53
Contenido de la caja .................................................................................................................................53
Accesorios.............................................................................................................................................54
Identificación de piezas.........................................................................................................................54
Pedido de las baterías del detector.......................................................................................................54
Desmontaje del dispositivo....................................................................................................................55

D-308403 29011054R001 PG9200AX 3
Registro.....................................................................................................................................................57
Paneles compatibles .............................................................................................................................57
Registrar el dispositivo ..........................................................................................................................57
Montar el dispositivo .................................................................................................................................58
Montar un detector en una pared..........................................................................................................59
Montar un detector en un poste.............................................................................................................61
Montar un segundo detector en dirección opuesta en un poste............................................................62
Ajustes del dispositivo...............................................................................................................................63
Componentes del dispositivo.................................................................................................................63
Funciones del interruptor.......................................................................................................................63
Ajustar el selector de frecuencia del haz de 4 canales .........................................................................64
Alineación óptica.......................................................................................................................................66
Ángulos de alineación ...........................................................................................................................66
Alineación del dispositivo ......................................................................................................................66
Probar el dispositivo..................................................................................................................................68
Indicaciones del LED.............................................................................................................................68
Solución de problemas..........................................................................................................................68
Temporizador ahorro de batería ...............................................................................................................70
Sustitución de las baterías ....................................................................................................................70
Ajustes opcionales....................................................................................................................................71
Dimensiones .............................................................................................................................................72
Especificaciones .......................................................................................................................................72
Cumplimiento de normativas.....................................................................................................................73
Garantía limitada.......................................................................................................................................74
Português....................................................................................................................................................78
Detector de feixe fotoelétrico sem fio........................................................................................................78
Recursos do detector................................................................................................................................78
Introdução.................................................................................................................................................78
Informação de Segurança.........................................................................................................................78
Conteúdo da caixa....................................................................................................................................78
Acessórios.............................................................................................................................................79
Identificação das peças.........................................................................................................................79
Pedido de baterias de detectores..........................................................................................................79
Desmontagem do dispositivo ................................................................................................................80
Registro.....................................................................................................................................................81
Painéis compatíveis...............................................................................................................................81
Registrando o dispositivo ......................................................................................................................81
Montagem do dispositivo ..........................................................................................................................82
Montagem de um detector em uma parede ..........................................................................................83
Montagem de um detector em um poste...............................................................................................85

4 D-308403 29011054R001 PG9200AX
Montagem de um segundo detector na direção oposta em um poste ..................................................87
Configurações do dispositivo ....................................................................................................................88
Funções da chave.................................................................................................................................88
Configuração do seletor de frequência de feixe de 4 canais.................................................................89
Alinhamento óptico....................................................................................................................................92
Ângulos de alinhamento........................................................................................................................92
Alinhamento do dispositivo....................................................................................................................92
Teste do dispositivo ..................................................................................................................................94
Indicação do LED..................................................................................................................................94
Solução de problemas...........................................................................................................................94
Temporizador de economia da bateria .....................................................................................................95
Substituição das baterias ......................................................................................................................95
Configurações opcionais...........................................................................................................................96
Dimensões................................................................................................................................................97
Especificações..........................................................................................................................................97
Conformidade com os padrões.................................................................................................................98
Garantia Limitada......................................................................................................................................99
English

D-308403 29011054R001 PG9200AX 5
Detector features
•Battery saving function
•4-channel beam frequency selector
•IP55 waterproof rating (Not evaluated by UL)
•Environmental disqualification circuit for configuring behavior in adverse weather conditions
•Tamper function
•Outdoor detection range of 200 ft
Introduction
The PG9200AX is a PowerG wireless photoelectric beam detector that provides protection for outdoor perimeters. The
beam detector consists of a receiver and a transmitter.
Warning: Failure to follow the instructions provided with this device, or improper handling, may cause death
or serious injury.
Safety information
Warnings
•Do not use the product for purposes other than the detection of moving objects such as people and vehicles.
•Do not use the product for unintended purposes, such as activating a shutter, which may cause an accident.
•Do not touch the product when it is wet or touch the device base or power terminals of the product with wet hands.
It may cause electric shock.
•Do not pour water over the product. It may cause damage to the devices.
•Never attempt to disassemble or repair the product. It may cause fire or damage to the devices.
•Do not use batteries that have different levels of power remaining, that is, new and used batteries. Not observing
these guidelines may result in an explosion, leakage of electrolyte, emission of toxic gases, or other outcomes that
may be harmful to people and property.
•When handling batteries, do not recharge, short circuit, crush, disassemble, exceed heat above 100°C (212°F),
incinerate, or expose the contents to water. Do not solder directly to the cell. Not observing these guidelines may
result in fire, explosion, or severe burn hazard.
•Clean and check the product periodically for safe use. If any problem is found, stop using the product, and have
the product repaired by a professional engineer or electrician.

6 D-308403 29011054R001 PG9200AX
Box contents
Transmitter and receiver modules
Product documentation
Hardware pack
Accessories
Parts identification
Ordering detector batteries

D-308403 29011054R001 PG9200AX 7
The specified batteries for the device are four (4) LSH20 batteries manufactured by SAFT, two for the transmitter
and two for the receiver.
For information about batteries, visit the following website and contact your local SAFT sales
representative. See http://www.saftbatteries.com/battery-search/ls-lsh/.

8 D-308403 29011054R001 PG9200AX
Disassembling the device
Disassemble the device before enrolling and mounting.
1. Loosen the back-box lock screw.
2. Press the tab on the bottom of the back box.
3. Loosen the screw at the bottom of the cover.
4. Pull the cover from the chassis.
Note: Complete the Disassembly process for both the transmitter and receiver before mounting the device.

D-308403 29011054R001 PG9200AX 9
Enrollment
Compatible panels
The device is compatible with the following panels:
•PowerSeries NEO (v1.37 and higher)
•PowerSeries Pro (v1.31 and higher)
•IQ2+ (v2.6.2 and higher)
•IQ Hub (v3.0.1 and higher)
•IQ4 (v4.0.1 and higher)
Enrolling the device
The enrollment process begins when you turn on the PowerG module. The PowerG module is a card in the detector.
Note: Enroll both the transmitter and receiver onto the control panel. The modules can be enrolled in any order.
A
PowerG daughter card
B
PowerG power switch
C
Configuration dipswitches
Configuration
Dipswitch 1
Dipswitch 2
Receiver
On
Off
Transmitter
Off
Off
1. Ensure the control panel is in enrollment mode.
2. Install batteries in the detector.
3. Turn the PowerG module power switch located on the interface board to the ON position. Refer to the control
panel installation manual for a complete set of enrollment instructions.
•If the automatic enrollment procedure fails, refer to the control panel instructions and enroll the device
manually.
4. Important! Turn the switch to the OFF position and remove the batteries. The batteries will be reinserted after
you mount the device.
Note: Complete Enrolling the device for both the transmitter and receiver before mounting the device.

10 D-308403 29011054R001 PG9200AX
Mounting
Callout
Description
A
Do not mount the device on an unstable surface
B
Do not mount the device on an unstable pole.
C
Do not mount the device near trees or other objects that may block the
beam.
D
Avoid mounting the receiver in direct sunlight. Sunlight can affect receiver
performance.
E
Do not mount the device where the infrared beam from a different model can
reach the receiver
F
Mount the device at a height between 0.7 m to 1 m (2.3 ft to 3.3 ft)
G
When mounting on a pole, the pole diameter should be 34 - 48 mm (1.34" -
1.89").
H
Mount the device at least 1 m (3.3 ft.) away from a wall or fence that is
parallel to the beam.
Caution: Completely install all components of the detector to comply with the IP55 standard requirements.

D-308403 29011054R001 PG9200AX 11
Mounting on a wall
1. Loosen the back-box lock screw.
2. Remove the chassis from the back-box.
3.
Use the supplied M4×20 wall mounting screws to fix the chassis to the wall.
4. After mounting the chassis, pick up the tamper bushing with your thumb and index finger.
5. Position the tamper bushing so that it is upright and moves smoothly.
6. Insert two batteries in the battery enclosure within the back-box and set the PowerG module switch to the ON
position.
7. Secure the back-box to the chassis on the wall.
8. Tighten the back-box lock screw.

12 D-308403 29011054R001 PG9200AX
Mounting on a pole
1. Loosen the back-box lock screw.
2. Remove the chassis from the back-box.
3. Using a screwdriver or similar tool, break the knockouts on the chassis.
4. Use the supplied M3 x 8 screws to attach three pole mounting brackets to the chassis.
5. Use the supplied M4x30 screws and U bracket to mount the back-box on the pole.

D-308403 29011054R001 PG9200AX 13
6. Complete steps 4 to 8 from the Mounting on a wall section.
Mounting a second detector in the opposite direction on a pole
1. Remove the chassis from the back box.
2. Using a screwdriver or similar tool, break the knockouts on the chassis of each detector. Choose a
different pair of knockouts for the second detector.
3. Use the supplied M3x8 screws to attach three mounting brackets to the chassis of each detector.
4. Use the supplied M4x30 screws and U-brackets to mount the chassis of each detector to the pole.

14 D-308403 29011054R001 PG9200AX
5. Complete steps 4 to 8 from the Mounting on a wall section for each detector.

D-308403 29011054R001 PG9200AX 15
Device settings
Callout
Component
A
Monitor jack (receiver only)
B
Switches
C
Receiver: Alarm indicator LED. Transmitter: Power LED
D
Low battery LED
E
View finder
F
Vertical alignment dial
G
Horizontal alignment dial
H
4-channel beam frequency selector
Switch functions
Warning: We do not recommend changing the default settings apart from the Battery saving timer. See Battery saving
timer for more information. Changing other default settings can cause the device to function incorrectly and increases
the chance of failure or false alarms.
Receiver
1 and 2: Beam interruption adjustment switch
3: Battery saving timer switch
4: Not used. Do not change the position of this switch.
5: N.C./N.O. selection switch
Transmitter
1: Battery saving timer switch
2: Not used. Do not change the position of this switch.
3: N.C./N.O. selection switch

16 D-308403 29011054R001 PG9200AX
Setting the 4-channel beam frequency selector
The 4-channel beam frequency selector is be used to avoid unwanted crosstalk that may occur when using
multiple photo beams for long distance or beam stackingapplications. To select between 4 separate beam
frequencies, use the switch provided.
• Make sure the receiver and transmitter that are facing each other are set to the same channel.
• More than double stacked application is not possible.
Note: Always switch the frequencies two channels apart when stacking devices on top of one another. See the
following example. The upper device is set on channel 1 while the lower is on channel 3, channels 2 and 4
could have also been used.
a) Double stacked protection
Because receiver B may receive the infrared beam from transmitter A, select the frequencies as shown in
the figure. In the figure, each number in the square indicates a channel number.
Key
Component
Tr-A
Transmitter A
Re-A
Receiver A
b) Long-distance protection
Since Receiver C may receive the infrared beam from Transmitter A, select their frequencies as shown
in the figure on the left.
c) Double stacked long-distanceprotection

D-308403 29011054R001 PG9200AX 17
d) Perimeter protection
e) Perimeter protection in a two-stack configuration
Warning:
• Do not attempt to install this product with any other photoelectric detectors. It may cause the detector to
fail or cause a false alarm.

18 D-308403 29011054R001 PG9200AX
Optical Alignment
After mounting, perform an optical alignment to ensure the device functions reliably.
Alignment angles
Callout
Component
A
Horizontal alignment angle
B
Vertical alignment angle
Aligning the device
1. Ensure the beam frequency selector positions of the paired transmitter and receiver are the same. See
the 4-channel beam frequency selector section.
2. While looking through the view finder, adjust the horizontal and vertical angles so that the pairing
detector is at the center of the sight.
a. For rough alignment of the horizontal angle, hold and move the lens to the left or right.
For fine alignment of the horizontal angle, turn the horizontal alignment dial.

D-308403 29011054R001 PG9200AX 19
b. For fine alignment of the vertical angle, turn the vertical alignment dial with a finger or Phillips
screwdriver. Turn the dial clockwise to align the lens upward. Turn the dial counterclockwise to
align the lens downward.
3. Adjust the horizontal and vertical angles while checking the Alarm indicator LED on the pairing
receiver.
Alarm indicator
LED
Beam not
received
Beam received
ON (red)
Fast blink
Slow
blink
OFF
Adjustment level
Re-adjust angle
Fair
Good
Excellent
Monitor jack
output
0 V > 1.0 V > 2.0 V > 2.5 V
Note : The Alarm indicator LED is a supporting tool for easy alignment. Perform fine alignment to
ensure the maximum output level through the monitor jack.
4. After checking by the alarm indicator, make finer alignment with the voltmeter for both the transmitter
and the receiver. Insert each probe of the voltmeter. Set the voltmeter range
to 5 to 10 VDC.
5. Continue the fine alignment until it reaches minimum monitor output of “good” , or more than 2.0 V.

20 D-308403 29011054R001 PG9200AX
Testing the device
After installation is complete, complete the following steps to test the device is functioning correctly :
1. Ensure the Alarm indicator LED is off. If the LED is on when the beams are not blocked, perform the
steps in the Optical alignment section again.
2. Ensure the low battery indicator LEDs on both transmitter and receiver are off. If the battery indicator LED is
blinking, replace the batteries in the device.
3. Conduct a walk test to check that the Alarm indicator LED on the receiver turns on as the walker
interrupts the beams.
Be sure to conduct a walk test at the following three points:
A. In front of the transmitter
B. In front of the receiver
C. At the midpoint between the transmitter and receiver
Installation and alignment are complete when the alarm indicator LED turns on at all three points of the walk test.
4. (Optional) If using, enable the Battery saving timer after completing the walk test. See Battery saving timer.
LED Indication
The following table describes the meaning of the LED indications of the device.
Detector status
LED indications
Power ON
The power LED turns ON.
Detection (beam interruption)
The alarm indicator LED turns
ON.
Low battery power
The low battery LED blinks.
Troubleshooting
If the alarm indicator LED is off or blinking when the beam is interrupted, complete the following steps:
1. Perform the steps in the Optical alignment section again.
2. In a multi-detector configuration, the receiver may be receiving the infrared beam from an unrelated
transmitter. See 4-channel beam frequency selector and check the 4-channel beam frequency selector
setting.
3. The beam from the transmitter may reach the receiver by reflecting off the floor or wall of a building.
Good reflectors of visible light are also good reflectors of infrared beams. Remove the reflective
objects around the detector or install the detector in a different place and then align the optical axis
again.