Junghans Calibre J800.1 User manual

Automatikwerk
Self-winding movement
J800.1 / J800.4
J820.2 / J820.4
JUNG H A N S – D I E DEUT S CHE U H R

1514
JU N G HA N S – THE GE R M AN WATC H
Many congratulations on your purchase of a timepiece from
Junghans.
What began in 1861 with the founding of the firm in Schramberg
quickly developed into one of the most fascinating success stories
of the German watchmaking industry. While since that time the
demands made of watches may have changed, the Junghans
philosophy has always remained the same. Innovative flair and the
constant pursuit of precision right down to the smallest detail
define how the company works and thinks. You can see and sense
this in every watch that carries the Junghans name. For as diverse
as the Junghans range may be, it pursues one single goal: to
combine traditional craftsmanship with cutting-edge watch
technology and exciting design. That makes every watch with the
Junghans star unique.
We hope you will enjoy this very special time-keeping instrument.
Yours,
Uhrenfabrik Junghans GmbH & Co. KG
ENG LIS H

1716
Cont nts Page
Instructions for use 17
General information 21
Instructions for use
Calibre J800.1 / J800.4 / J820.2 / J820.4
Important note:
Do not make any changes to the date between 08:00 p.m. and 02:00
a.m., as the date is automatically advanced by the movement during
this period and you could damage the date advance mechanism.
Winding up the watch
With the winder in position A, you can wind up the automatic move-
ment manually. At least 2 to 3 rotations of the winder are needed to
start the movement. It is better to wind it up completely. It is fully
wound up after c. 40 rotations of the winder, as then the maximum
accuracy and its power reserve (even after the watch is put down) will
last for the maximum period.If your model has a screw-locked winder,
this must be un screwed by turning it to the left to start your watch
going. After you have set your watch, you should wear it, so that the
automatic winding system (via rotor movement) keeps it constantly
operational.

18 19
S tting th tim
Pull the winder into position C. That stops the watch movement.
To set your watch accurately to the second, it is best to stop the
movement as the second hand is passing the figure 60. You can now
position the minute hand precisely in line with the relevant minute
marker and set the desired time. Press the winder back into position
A to start the second hand.
F atur s and functions
Calibr J800.1 / J800.4 / J820.2 / J820.4
1
2
4
5
6
3
A B C
25
1 Hour hand
2 Second hand
3 Week day display
(depending on model)
4 Minute hand
5 Winder
6 Date display
S tting th dat
Pull the winder into position B. You can now set the date by turning it
to the right. Do not mak any chang s to th dat b tw n 8pm and
2am, as th dat is automatically advanc d by th mov m nt during
this p riod and you could damag th dat advanc m chanism. If the
month has less than 31 days, set the date manually to the first day of
the following month.
S tting th w k day (d p nding on mod l)
Pull the crown into position B. Rotate the crown left to set the week day.
Do not mak any chang s to th dat b tw n 8pm and 2am, as th
dat is automatically advanc d by th mov m nt during this p riod
and you could damag th dat advanc m chanism.
T chnical information
Calibr J800.1 / J800.4
• Automatic movement with
display for date
• Bi-directional winding
• 28,800 semi-vibrations per hour
• 38 hour power reserve
• Anti-magnetic to DIN 8309
• Shockproof: Incabloc or
Nivachoc
• Balance: Gold-plated nickel
Calibr J820.2 / J820.4
• Automatic movement with
display for date
• Bi-directional winding
• 28,800 semi-vibrations per hour
• 42 hour power reserve
• Anti-magnetic to DIN 8309
• Shockproof: Incabloc or
Nivachoc
• Balance: Gold-plated nickel

2120
Impermeability
Marking Instructions for use
Washing,
rain,
splashes Shower Bath Swimming
Diving
without
equipment
No mark No No No No No
3 BAR Yes No No No No
5 BAR Yes No Yes No No
10 BAR Yes Yes Yes Yes No
The designation ”3 – 10 BAR” only applies to brand new watches. External
influences can affect water resistance. Please have your watch checked
regularly.
General information
External influences can affect the watch’s waterproof qualities, which
may let in moisture. We therefore recommend that you have your
watch regularly inspected by your Junghans specialist. Other servicing
tasks or wrist strap repairs should also be done by your Junghans
specialist. Your watch is fitted with a quality wrist strap that has under-
gone multiple inspections in our factory. If, however, you decide to
change the strap, please fit a new one of the same quality, preferably an
original Junghans wrist strap. Watch and wrist strap can be cleaned
with a dry or slightly moistened cloth.
NB: Do not use che mical cleaners (e.g. benzine or paint thinners). These
may harm the surface.

42.712-0520 / 1116 J800.1 / J800.4 / J820.2 / J820.4
Uhrenfabrik Junghans GmbH & Co. KG
Postfach 100 · D-78701 Schramberg
www.junghans.de · [e-mail]