Junghans J800.2 User manual

Automatikwerk
Self-winding movement
J800.2
J800.3
JUNGHANS – DIE D E U T SCHE UHR

1514
JUNGHAN S – TH E G E R M AN WATCH
Many congratulations on your purchase of a timepiece from
Junghans.
What began in 1861 with the founding of the firm in Schramberg
quickly developed into one of the most fascinating success stories
of the German watchmaking industry. While since that time the
demands made of watches may have changed, the Junghans
philosophy has always remained the same. Innovative flair and
the constant pursuit of precision right down to the smallest detail
define how the company works and thinks. You can see and sense
this in every watch that carries the Junghans name. For as diverse
as the Junghans range may be, it pursues one single goal: to
combine traditional craftsmanship with cutting-edge watch
technology and exciting design. That makes every watch with the
Junghans star unique.
We hope you will enjoy this very special time-keeping instrument.
Yours,
Uhrenfabrik Junghans GmbH & Co. KG
ENG LISH

1716
Inhalt Seite
Instructions for use 17
Technical Information 20
General Information 21
Impermeability 22
Instructions for use
Winding up the watch
With the winder in position A, you can wind up the automatic move-
ment manually. At least 2 to 3 rotations of the winder are needed to
start the movement. It is better to wind it up completely. It is fully
wound up after approx. 30 rotations of the winder, as then the maxi-
mum accuracy and its power reserve (even after the watch is put
down) will last for the maximum period.If your model has a screw-
locked winder, this must be un screwed by turning it to the left to start
your watch going. After you have set your watch, you should wear it, so
that the automatic winding system (via rotor movement) keeps it con-
stantly operational.

18 19
2
9
10
11
AB
8
7
1
12
6
4
3
MON JAN
1
2
3
4
5
6
7
8
9
1
0
1
1
1
2
1
3
1
4
1
5
1
6
1
7
1
8
1
9
2
0
2
1
2
2
2
3
2
4
2
5
2
6
2
7
2
8
2
9
3
0
3
1
5
MON JAN
7
2
No corrections to date, moon phase, day or month may be made during
the changeover period from 3pm to 1am.
Setting the date
Press the date corrector (11) with the enclosed corrector tool until the
required date is displayed.
Setting the week day
Press the week day corrector (3) with the enclosed corrector tool until
the required week day is displayed.
Setting the month
Press the month corrector (8) with the enclosed corrector tool until the
required month is displayed.
Setting the moon phase
Press the moon phase corrector (6) with the enclosed corrector tool
until the required moon phase is displayed.
To achieve a precise setting we recommend setting the moon phase
during full moon.
Setting the time
Pull the winder into position B. That stops the watch movement.
To set your watch accurately to the second, it is best to stop the
movement as the second hand is passing the figure 60. You can
now position the minute hand precisely in line with the relevant
minute marker and set the desired time. Press the winder back
into position A to start the second hand.
Features and functions
Calibre J800.2 / J800.3
1 Hour hand
2 Day of week display
3 Day of week corrector
4 Second hand
5 Moon phase
6 Moon phase corrector
7 Month display
8 Month corrector
9 Minute hand
10 Winder
11 Date corrector
12 Date display

2120
General information
External influences can affect the watch’s waterproof qualities, which
may let in moisture. We therefore recommend that you have your
watch regularly inspected by your Junghans specialist. Other servicing
tasks or wrist strap repairs should also be done by your Junghans
specialist. Your watch is fitted with a quality wrist strap that has
undergone multiple inspections in our factory. If, however, you decide
to change the strap, please fit a new one of the same quality, preferab-
ly an original Junghans wrist strap. Watch and wrist strap can be cle-
aned with a dry or slightly moistened cloth.
NB: Do not use che mical cleaners (e.g. benzine or paint thinners). These
may harm the surface.
Technical information
Mechanical 3-hand movement with date, day of week, month and
moon phase display
Calibre J800.2 / J800.3
Automatic winding mechanism with ball-bearing
25 jewels
28,800 semi-vibrations per hour
Appr0x. 36 hour power reserve
Anti-magnetic to DIN 8309
Shockproof: Incabloc or Nivachoc
Spring: Nivarox II
Balance: Gold-plated nickel

22 23
Impermeability
Marking Instructions for use
Washing,
rain,
splashes Shower Bath Swimming
Diving
without
equipment
No mark No No No No No
3 ATM Yes No No No No
5 ATM Yes No Yes No No
10 ATM Yes Yes Yes Yes No
The designation ”3 – 10 ATM” only applies to brand new watches.
External influences can affect water resistance. Please have your watch
checked regularly.

42.712-0571 / 4460634 / 0614 J800.2 / J800.3
Uhrenfabrik Junghans GmbH & Co.KG
Postfach 100 · D-78701 Schramberg
www.junghans.de · [e-mail]