max.5VDC
(-) BL
(+) BL
INPA
INP B
GND
1
3
2
4
5
6
7
8
Reset
Reset
Enable
10 .. 260
10 .. 260
VAC/VDC
VAC/VDC
Common
AC/DC
24VDC ±20 %, 50 mA
max.5VDC
(-) BL
(+) BL
INPA
INP B
GND
1
3
2
4
5
6
7
8
Reset
Reset
Enable
10 .. 260
10 .. 260
VAC/VDC
VAC/VDC
Common
AC/DC
24VDC ±20 %, 50 mA
Pulse
counters
Pulse counters, electronic
Power supply internal lithium battery
approx. 8 years at 20°C [68°F]
EMC Emitted interference EN 55011 class B
Immunity to interference EN 61000-6-2
Device safety Designed to EN 61010 part 1
Protection class 2
Application area Pollution level 2
UL approval File-No.: E128604
Counting input of the high voltage versions (10 ... 260 V DC/AC)
Counting and direction input
Optocoupler input max. 30 Hz
Minimum pulse time 16 ms
Switching level LOW 0 ... 2 V AC/DC
HIGH 10 ... 260 V AC/DC
Reset input
Minimum pulse time DC 50 ms
High voltage 16 ms
Contact input DC – NPN LOW 0 ... 0.7 VDC
HIGH 3 ... 30 V DC
Electrical reset key locking
Contact input open collector NPN
(switching at 0 V)
Switching level – NPN LOW 0 ... 0.7 V DC
HIGH 3 ... 5 V DC
General technical data
Technical data
Counting inputs
Electrical characteristics Terminal assignment
AC type: 6.132.012.8x3
BL = backlighting
Display LCD, 8 digits, 8 mm [0.32“] high
Backlighting external electrical source
24 V DC ±20%, 50 mA
Modes counting direction (count
and direction input)
Display range -9999999 ... 99999999,
with overflow display
Reset manual and electrical
Working temperature -10°C ... +55°C [+14°F ... +131°F]
(non-condensing)
Operating temperature -10°C ... +60°C [+14°F ... +140°F]
(non-condensing)
Storage temperature -20°C ... +70°C [-4°F ... +158°F]
Altitude up to 2000 m [6562‘]
Housing dark grey RAL 7021
Protection IP65 (front side)
Weight approx. 50 g [1.76 oz]
Mechanical characteristics
Transparent cover, lockable, IP65
Sealing cover type K1, IP65
For cut-out 54 x 29 [2.13 x 1.14], for screw mounting to front bezel F1B or
adapter front bezel N003001,
for counters with cut-out 50 x 25 [1.97 x 0.98] or 45 x 22.2 [1.77 x 0.87]
N003002
Suitable for front bezel 60 x 50 [2.36 x 1.97], for screw mounting of electromech.
counters and via adapter front bezel N003001 for counters 48 x 24 [1.89 x 0.94] G008301
Suitable gaskets as well as further accessories can be found in the accessories section or in the accessories area of our website at: www.kuebler.com/accessories.
Adapter front bezel, 72 x 36 [2.83 x 1.42]
Adapter front bezel, 48 x 48 [1.89 x 1.89]
Adapter front bezel, 60 x 50 [2.36 x 1.97]
For cut-out 68 x 33 [2.68 x 1.30] to cut-out 45 x 22.2 [1.77 x 0.87],
for counters 48 x 24 [1.89 x 0.94], as set black and silver anodised 162704 Set
For cut-out 45 x 45 [1.77 x 1.77] to cut-out 45 x 22.2 [1.77 x 0.87],
with clip mounting for counters 48 x 24 [1.89 x 0.94] black T008883
For cut-out 54 x 29 [2.13 x 1.14] to cut-out 45 x 22.2 [1.77 x 0.87],
with screw mounting and gasket for counters 48 x 24 [1.89 x 0.94] black N003001
Mounting frame
with cut-out 50 x 25 [2.36 x 1.97]
via separate adapter also for 45 x 22.2 [1.77 x 0.87]
For snap-on mounting on 35 [1.38] top-hat DIN rail,
for counters 53 x 28 [2.09 x 1.10]
and via separate adapter (T008180) for counters 48 x 24 [1.89 x 0.94] chromated G300004
Accessories Dimensions in mm [inch] Order-No.
LCD pulse counters Codix 132With count direction AC (battery)
Phone:
800.894.0412
-
Fax:
888.723.4773
-
Web:
www.clrwtr.com
-
Email:
[email protected]
