Kane KANE458 User manual

www.kane.co.uk
Welcome
KANE458
Flue Gas Analyser with
direct CO2measurement
& CO sensor ‘over-range’
protection
Quick reference guide

Menu controls -
Scroll Up/Down
Enter
Particle filter
Water trap
Flue gas inlet
(see section 2)
Analyser connections
(see section 2)
Battery charging
indicator
Rotary switch
Function buttons x4
(see below)
Know your KANE458
1
Hello KANE458 getting started
1 Know your KANE458
2 Connections
3 Before use
4 Product registration
Analyser On/Off
Pump On/Off
Hold button to zero pressure
or zero gas
Torchlight On/Off
Send/Enter
Send readings to printer
Press for 1 second to print
Press for 2 seconds to log

Water trap
Flue gas inlet
(see section 2)
Send/Enter
Send readings to printer
Press for 1 second to print
Press for 2 seconds to log
Before use
3
Check
Particle lter is not dirty; Water trap and ue probe are empty of water; Water trap and
red scred plug are tted to analyser; Flue probe hose is connected to ue gas inlet; Flue
probe temperature plug is connected to T1 temperature connection
Fresh air purge
Position ue probe in fresh air & press “On/O”
Analyser auto-calibrates within 90 seconds
Select “Ratio” on dial. In fresh air CO reading = 0ppm
Select “O2/E” on dial. In fresh air 02 reading = 20.9%
Select “Status” on dial to view
For best pressure sensor accuracy
Switch analyser on for 5 minutes to let temperature stabilise
Zero pressure sensor when analyser in exact position it will be used
To charge NiMH rechargeable batteries
Switch o
Connect the charger; charging indicator illuminates
Display shows “BATTERY CHARGING” if batteries need charging
Connections
2
Battery charger connection
Watertrap drain with
red screw plug
Flue probe temperature T1
Inlet temperature T2
Pressure
connection P1
Pressure
connection P2
(Differential)
Flue gas inlet
Fit spigot to
hose before
connecting to
flue gas inlet

Northern Customer Service
Kane International Ltd
Gibfield Park Avenue, Atherton,
Manchester, M46 0SY, UK
Tel: [phone]
Fax: [phone]
Email: [email protected]
Southern & International Customer Service
Kane International Ltd
Kane House, 11 Bessemer Road,
Welwyn Garden City, Hertfordshire, AL7 1GF, UK
Tel: [phone]
Fax: [phone]
Email: [email protected]
01707 384810
UK Sales Line
Fax: [phone]
Email: [email protected]
® The KANE logo is a registered trademark of Kane Group Limited.
All other marks are trademarks of their respective holders. Stock No. 19903 May 2017
Follow us on...
4
We really want you to register your Kane
analyser at www.kane.co.uk
Benefits include:
Download full instruction manual
Automatic reminder when time to
Service – Calibrate – Recertify
Fixed prices always visible
Simple online procedure to
arrange to Service - Calibrate
- Recertify ensures fastest
turnaround times possible
Easy access to your calibration
certicate & service history
Easy to report your analyser stolen
Product specic information &
resources in one place
Please register
Outside UK Call [phone]
For the full instruction manual please register your
analyser at www.kane.co.uk