Kangaroo Ava 9301B User manual

SEW IN COMFORT. SEW LONGER.™
ASSEMBLY INSTRUCTIONS
Ava
ITEM NO.: 9301B White
9301J White
9301B
9301J

Assembly InstructionsAva 2
1. Read the instructions carefully before beginning the assembly process to ensure proper assembly
of this product. Please open and inspect the contents of box(es) to see that all parts and hardware
are included.
2. Tools Required
180°
Screw cam bolts flush as
illustrated.
Press cam into hole until flush with
surface. The arrow direction must
be in the direction of the hole.
Insert bolt through pre-drilled
hole in edge of panel.
Turn clockwise to lock cam with bolt.
General Assembly Guidelines
3. Understanding How the Cam Fastener Works
Tip: place a small bit of WD-40 or similar
lubricant into the pre-installed cam bolt
holes to help the cam bolts screw in better.
4. Glue provided is to secure wood dowels in place and is optional. If glue is used during assembly,
locate the appropriate hole for the dowel, place a small amount of glue in the hole and insert the
dowel. Wipe away excess glue immediately. It is not necessary to glue the other end of the dowel
when attaching to other parts.
Phillips Screwdriver Hammer Electric Screwdriver
Torque set to 3-5
Use and Care
Your cabinet normally requires a minimum amount of maintenance; however, it is worth noting the
following for regular cleaning:
To remove marks and enhance the surface, wipe with a gentle all-purpose cleanser. DO NOT use
ammonia-based, harsh chemicals or abrasive cleaning agents. Wipe dry immediately.

Assembly InstructionsAva 3
Parts List: Panels
ITEM DESCRIPTION QT Y. PACK.
DBack Panel 1 1 of 4
Y2 Vertical Center Panel 1 1 of 4
Y3 Vertical Center Panel 1 1 of 4
O1 Bin Panel Piece 3 1 of 4
K1 Thread Spool Holder Drawer Bottom 1 1 of 4
K6 Middle Drawer Bottom Panels 2 1 of 4
K11 Bottom Drawer Left Side 1 1 of 4
K12 Bottom Drawer Right Side 1 1 of 4
K13 Bottom Drawer Bottom Panel 1 1 of 4
F1 Immovable Shelf 1 2 of 4
F2 Immovable Shelf 1 2 of 4
K7 Middle Drawer Front Panels 2 2 of 4
K2 Middle Drawer Inside Front Panels 2 2 of 4
K3 Middle Drawer Back Panels 2 2 of 4
ITEM DESCRIPTION QT Y. PACK.
K4 Middle Drawer Left Panels 2 2 of 4
K5 Middle Drawer Right Panels 2 2 of 4
K9 Bottom Drawer Inside Front Panel 1 2 of 4
K10 Bottom Drawer Back Panel 1 2 of 4
O2 Bin Panel Piece 3 3 of 4
O3 Bin Panel Piece 1 3 of 4
04 Bin Panel Piece 1 3 of 4
KTop Drawer Front Panel 1 3 of 4
K8 Bottom Drawer Front Panel 1 3 of 4
XLeft Side Panel 1 3 of 4
ZRight Side Panel 1 3 of 4
ATop Panel 1 4 of 4
GBottom Panel 1 4 of 4
A
D
F1
F2
Y2
Y3
G
X
Z
O4
O3
O1
O1
O1
O2
O2
O2
K11
K4
K10
K13
K9
K8
K12
K3
K5
K6
K2
K7
K1
K
X2

Assembly InstructionsAva 4
6x35 Cam Bolt x62
c1
8x30 Dowel Pin x72
d1
5⁄8“ Cam Cover x62
c2
3.5x30 Screw x16
s1
3.5x35 Screw x24
s2
4x20 Fix Bolt x10
b2
Handle x5
h
Allen Wrench x1
a
Heavy Duty Caster x4
t2
8x16 Fix Bolt x16
b1
Parts List: Hardware
TIP: Keep all the parts in their individually labeled bags. This will make finding parts easier as you assemble your cabinet.
Adhesive Foam Sheet x2
EVA
9301B ONLY:
4x16 Screw x6
s3
Right Stabilizing Bracket Left Stabilizing Bracket

Assembly InstructionsAva 5
Step 1: Cabinet Shell
Congratulations and welcome to Arrow Sewing Furniture! We can’t wait to get your brand new Ava Embroidery Cabinet up and
running. Please contact our Customer Service Team at 1-800-533-7347 ext. 1 during normal business hours with any assembly
related questions.
Panel Z has two sides to be prepared for assembly.
Prepare Side 1 of Panel Z with c1 Cam Bolts and d1 Dowel Pins as shown above.
Prepare Side 2 of Panel Z with c1 Cam Bolts as shown below.
Set Panel Z aside.
6x35 Cam Bolt x12
c1
8x30 Dowel Pin x6
d1
Z
Z
c1
c1
d1
Side 1
Side 2

Assembly InstructionsAva 6
Step 1: Cabinet Shell
6x35 Cam Bolt X9
c1
8x30 Dowel Pin x34
d1
5⁄8“ Cam Cover x6
c2
O3
O4
O2
O1
O1
O2
c1
d1
X3
X3
Prepare Panels O4, O3, O2 and O1
as shown.
NOTE: Repeat twice for Panels O1
and O2 (3 panels total each).
X3
Attach Panel O1 to Panel O2 by inserting
cam bolts into cam locks as shown.
Tighten cam locks and apply c2 Cam
Covers.

Assembly InstructionsAva 7
Step 1: Cabinet Shell
O1
O1
O1
O4
O3
5⁄8“ Cam Cover x3
c2
Attach Panel O1/O2 pieces to Panel O4 by inserting cam bolts into cam locks.
Tighten cam locks and apply c2 Cam Covers.
Insert dowels on Panel O3 into Panel O4.

Assembly InstructionsAva 8
Step 1: Cabinet Shell
O4
O1
O1
O1
Z
F1
F2
5⁄8“ Cam Cover x8
c2
6x35 Cam Bolt x4
c1
8x30 Dowel Pin x12
d1
Attach Panel O1/O2/O3/O4 Assembly
to Panel Z as shown, inserting cam bolts
into cam locks. Tighten cam locks and
apply c2 Cam Covers.
Attach c1 Cam Bolts to Panels F1
and F2 as shown.
Insert d1 Dowel Pins into the edges
of Panels F1 and F2 as shown.
c1
d1

Assembly InstructionsAva 9
Step 1: Cabinet Shell
F2
F1
D
5⁄8“ Cam Cover x4
c2
6x35 Cam Bolt x9
c1
8x30 Dowel Pin x6
d1
Attach Panels F1 and F2 to Panel Z as shown.
Insert cam bolts into cam locks, tighten, and
apply c2 Cam Covers.
Z
Attach c1 Cam bolts to Panel D.
Insert d1 Dowel Pins into the edges
of Panel D.
d1
c1

Assembly InstructionsAva 10
Step 1: Cabinet Shell
D
F2
F1
Z
5⁄8“ Cam Cover x9
c2
Carefully lower Panel D onto the assembled panels as
shown, inserting cam bolts into cam locks, tightening,
and applying c2 Cam Covers.

Assembly InstructionsAva 11
Step 1: Cabinet Shell
X
6x35 Cam Bolt x6
c1
8x30 Dowel Pin x4
d1
Carefully turn the cabinet over so that Panel D is
on the floor. You may need someone to help you
with this step.
Attach c1 Cam Bolts to Panel X as shown.
Insert d1 Dowel Pins into the edges of Panel X as shown.
c1
d1
D

Assembly InstructionsAva 12
Step 1: Cabinet Shell
D
F1
F2
X
5⁄8“ Cam Cover x6
c2
Attach Panel X to Panels D, F1 and F2, in-
serting cam bolts into cam locks, tightening,
and applying c2 Cam Covers.

Assembly InstructionsAva 13
Step 1: Cabinet Shell
Y2
Y3
Y3
F2
8x30 Dowel Pin x8
d1
5⁄8“ Cam Cover x2
c2
Insert d1 Dowel Pins into the
edges of Panels Y2 and Y3.
Set Panel Y2 aside for now.
Attach Panel Y3 to Panel F2, inserting
cam bolts into cam locks, tightening,
and applying c2 Cam Covers.
d1

Assembly InstructionsAva 14
Step 1: Cabinet Shell
G
6x35 Cam Bolt x9
c1
D
Carefully turn the cabinet over
so that it is upside down. You
may need someone to help you
with this step.
Attach c1 Cam Bolts to Panel G as shown.
c1
X

Assembly InstructionsAva 15
Step 1: Cabinet Shell
G
D
X
5⁄8“ Cam Cover x9
c2
Carefully lower Panel G onto the assembled panels
of the cabinet, inserting cam bolts into cam locks,
tightening, and applying c2 Cam Covers.

Assembly InstructionsAva 16
Step 1: Cabinet Shell
G
Heavy Duty Caster x4
t2
8x16 Fix Bolt x16
b1
Allen Wrench x1
a
Make sure the casters are locked and
carefully turn the cabinet up onto its
wheels. You may need someone to
help you with this step.
Attach t2 Heavy Duty Casters to Panel
G using b1 Fix Bolts. Tighten with Allen
Wrench.

Assembly InstructionsAva 17
Step 1: Cabinet Shell
Y2
F1
5⁄8“ Cam Cover x2
c2
Attach Panel Y2 to Panel F1 as shown, inserting
cam bolts into cam locks, tightening, and applying
c2 Cam Covers.

Assembly InstructionsAva 18
Step 1: Cabinet Shell
A
6x35 Cam Bolt x9
c1
Attach c1 Cam Bolts to Panel A.
c1
A
Attach c1 Cam Bolts to Panel A.
Attach Stabilizing Brackets to Panel A using
s3 Screws as shown.
c1
9301B ONLY:
s3

Assembly InstructionsAva 19
Step 1: Cabinet Shell
A
X
Y2
Z
5⁄8“ Cam Cover x9
c2
Carefully lower Panel A onto the assembled panels
of the cabinet, inserting cam bolts into cam locks,
tightening, and applying c2 Cam Covers.

Assembly InstructionsAva 20
K1
K
Step 2: Drawers
K1
K
6x35 Cam Bolt x4
c1
8x30 Dowel Pin x2
d1
5⁄8“ Cam Cover x4
c2
Insert d1 Dowel Pins into the
edges of Panel K1.
Attach c1 Cam Bolts to Panel K.
Attach Panel K to Panel K1, inserting
cam bolts into cam locks, tightening,
and applying c2 Cam Covers.
c1
d1