Suncast MTL6822 User manual

0630006 4 PCS 0630051 4 PCS 0630053 4 PCS 0630049 1 PCS 0630054 2 PCS
0] 1O-24x1 1/8"
Truss Head
(3/16" -24 x 1 118') For
/ Information on
fSuncast products and\
f replacement parts see
I www.suncast.com
2004 Suncast Corporation Patents Pending 0660013
OWNER'S MANUAL TL6822STORAGE TRENDS METAL
TALL LOCKER WITH NARROW SHELF
IMPORTANT:
Follow Instructions listed below in the proper sequence as
numbered to assure fast, easy and correct assembly. This product
contains parts that can be damaged if incorrectly assembled
Before assembling, please count your parts and hardware as
listed below.
Do not fully tighten screws until the product is fully assembled.
0000 0000
REPLACEMENT PARTS ORDERING INSTRUCTIONS:
Call Suncast for pricing information. Call 800-846-2345 or 630-879-
2050. Monday-Friday 8:OOam-4:3Opm Central Time (expect holidays).
Or see www.suncast.com
M] Padlock Bracket
P] 1/4"-20x1 1/4"
Button Head 5/32" Wrench 3/8" Combination
Wrench
0630052 4 PCS 0630007 18 PCS 0630009 1 Pc 0630008 1 c

1. Attach Top Panel (D) to Side Panels (BL &
BR), using Screw (P).
2. Attach Narrow Shelf (E) to Side Panels (BL
& BR), using Screw (P).
3. Attach Bottom Panel (F) to Side Panels (BL
& BR), using Screw (P).
4. Looking inside unit, locate holes in Side
Panels (BL & BR). To hang Hanger (G) set
one end of Hanger (G) into one hole and
place remaining Hanger (G) end in opposite
hole.
0660013
P
5. Attach Back Panel (C) in rear of unit, using
Screw (P).
6. Attach Padlock Bracket (M) to Left Side
Panel (BL) with Screw (0), Lock Washer (L)
and Nut (K).
M
7. Place the Magnet (I) on Left Side Panel
(BL), and attach with Screw (N).

8. Align Door Handle (H) with the holes in middle
of Door Panel (A). Attach Door Handle (H) with
Screw (0), Lock Washer (L) & Nut (K).
9. Screw Feet (J) into holes on legs of unit.
Adjust as necessary to level unit.
10. Align top and bottom hinge of Door (A)
with top and bottom hinge receptacles on
unit. Slide Door down to engage hinges.
,0660013
AK4.L
L
J