Kargo Master 40053 Manual

Kargo Master
Rancho Cordova, CA 95742
800-343-7486
[e-mail]
20200520R1 DATE: ________________
Instruction Guide
40053

Installation Instructions –40053
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 1
*PLEASE READ ALL INSTRUCTIONS AND WARNINGS PRIOR TO ASSEMBLING, INSTALLING,
AND USING THIS PRODUCT.*
Warning
Always check for wires, fuel tanks and lines, brake lines and other important vehicle
functionality items prior to drilling and installing all products.
Tools Needed
3/8” Socket and Wrench
17/64” Drill Bit
Drill
Table of Contents
Before You Begin .............................................................................................................................................................. 1
Parts List ........................................................................................................................................................................... 1
Hardware.......................................................................................................................................................................... 2
Installation........................................................................................................................................................................ 2
Before You Begin
Read all instructions prior to installing any Kargo Master product.
Parts List

Installation Instructions –40053
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 2
Hardware
Installation
Determine swivel hook installation location.
Mark through the holes in hook base plate onto mounting
surface.
Always check that each installation location is clear
of wires, fuel tanks and lines, brake lines and other
important vehicle functionality items prior to
drilling and installing any product.
At each marked location, drill a hole using 17/64” drill bit.
Using two 1/4” x 1/2” flanged hex head bolts and two 1/4”
flanged lock nuts, securely install locking swivel hook.
Repeat installation instructions for each hook.
GO BACK AND ENSURE ALL
HARDWARE IS TIGHTENED.
INSTALLATION IS COMPLETE.
MARK &
DRILL
MARK &
DRILL