Kargo Master 40110 User manual

Installation Guide
40110
Kargo Master
Rancho Cordova, CA 95742
800-343-7486
[e-mail]
DATE: ______________

For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 1
Installation Instructions –40110
*PLEASE READ ALL INSTRUCTIONS AND WARNINGS PRIOR TO ASSEMBLING,
INSTALLING, AND USING THIS PRODUCT*
Warning
Always check for wires, fuel tanks and lines, brake lines and other important vehicle
functionality items prior to drilling and installing all products.
Tools Needed
Phillips Driver
7/16” Wrench and Socket
1/4” Drill
Table of Contents
Parts List ................................................................................................................................... 2
Hardware List ........................................................................................................................... 2
Step 1 Find Location ................................................................................................................. 3
Step 2 Attach ............................................................................................................................ 3
Before You Begin
•Read all instructions.
•ENSURE SAFETY PRIOR TO DRILLING.
•Product can be installed on virtually any sheet metal product. Make use of the first aid
holder on shelves, partitions, lockers and much more.

For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 2
Installation Instructions –40110
Parts
Hardware

For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 3
Installation Instructions –40110
Step 1 –Find Location
•Find desired location for first aid holder to be installed.
•Place first aid holder (A) in desired location. Be sure first
aid holder is square and to your liking.
•Mark hole locations and drill with 1/4" drill.
Step 2 –Attach
•Bolt together using four 1/4”x 1/2" round heads (1) and four 1/4 nylocs (2)
Ensure all bolts are tight. Your Installation is now complete.