Keba KeContact KC-P30 Series User manual

KeContact
KC-P30 Charging Station
Calibratable measurement device for electrical
energy in accordance with § 46 of the German
Measures and Verification Act (REA No. 6.8)
V 1.03
Translation of the original instructions

Document:V 1.03
Document No.: 109439
Pages: 40
© KEBA
Specifications are subject to change due to further technical developments. Details presented may be
subject to correction.
All rights reserved.
KEBA AG Headquarters: Gewerbepark Urfahr, 4041 Linz, Austria, Phone: [phone],
Fax: [phone], [email protected]
For information about our subsidiaries please look at www.keba.com.

KC-P30 Charging Station Table of contents
V1.03 3
© KEBA
Table of contents
1 Introduction ................................................................................................................ 5
1.1 Representation of safety instructions............................................................... 5
1.2 Purpose of the document................................................................................. 6
1.3 Requirements................................................................................................... 6
1.4 Notes on this document ................................................................................... 6
1.4.1 Contents of the document.................................................................. 7
1.4.2 Not contained in this document ......................................................... 7
1.5 Further documentation..................................................................................... 7
2 Description of the device........................................................................................... 8
2.1 Design.............................................................................................................. 8
2.2 Type plate ........................................................................................................ 8
2.3 Overview of variants ........................................................................................ 9
2.4 Access concept................................................................................................ 11
2.5 Meter seal ........................................................................................................ 11
2.6 Display ............................................................................................................. 12
2.7 Brightness sensor ............................................................................................ 13
2.8 Pulse LED ........................................................................................................ 13
2.9 Active power meter .......................................................................................... 14
2.9.1 Measurement principle ...................................................................... 14
2.9.2 Backstop ............................................................................................ 15
2.9.3 Operational readiness........................................................................ 15
3 Requirements ............................................................................................................. 16
3.1 Rated operating conditions .............................................................................. 16
3.2 Instructions for correct measurement in accordance with type examination
certificate.......................................................................................................... 16
3.3 Additional requirements for the operator.......................................................... 19
3.4 Additional recommendations............................................................................ 19
4 Auxiliary device .......................................................................................................... 21
4.1 Instant display of relevant information ............................................................. 21
4.2 Generation of measurement data records ....................................................... 21
4.3 Generation of log data records ........................................................................ 24
4.4 Remote transmission of data records .............................................................. 26
5 Using the device......................................................................................................... 28
5.1 Triggering the display of relevant data............................................................. 28
5.2 Billing ............................................................................................................... 28
5.3 Resuming charging after a power failure ......................................................... 29
5.4 Verification of measurement data using the transparency and display
software ........................................................................................................... 29

KC-P30 Charging Station Table of contents
V1.03 4
© KEBA
6 Calibrating the device ................................................................................................ 32
6.1 Calibration........................................................................................................ 32
6.2 Inspection of commissioned devices ............................................................... 32
6.2.1 Condition inspection .......................................................................... 32
6.2.2 Functional tests, including accuracy checks...................................... 33
6.2.3 Billing control ..................................................................................... 34
6.3 Testing in test mode......................................................................................... 34
6.3.1 Test mode.......................................................................................... 34
6.3.2 Schematic measurement setup ......................................................... 36
6.3.3 Activate/deactivate test mode............................................................ 36
6.4 Applying the calibration stamp and seal .......................................................... 38
7 Disposal ...................................................................................................................... 40

KC-P30 Charging Station Introduction
V1.03 5
© KEBA
1 Introduction
This manual is valid for the KC-P30 variants with conformity assessment
procedures in accordance with the German Measures and Verification Ordi-
nance (MessEV)1).
The pictured devices used in this manual are visual examples. The figures
and explanations contained in this manual refer to a typical device design.
The devices used by you may differ in their appearance.
1) Calibratable measurement device for electrical energy in acc. with § 46 of the German
Measures and Verification Act (REA No. 6.8)
Firmware assessed for conformity
This manual refers to devices with the following firmware, which has been
assessed for conformity:
● Firmware version: 2.8.6
● Checksum: 0x976c
● Display: ME86#976c
1.1 Representation of safety instructions
At various points in this manual, you will see notes and precautionary warn-
ings regarding possible hazards. The symbols used have the following
meaning:
DANGER!
indicates an imminently hazardous situation, which will result in death or se-
rious bodily injury if the corresponding precautions are not taken.
WARNING!
indicates a potentially hazardous situation, which can result in death or seri-
ous bodily injury if the corresponding precautions are not taken.
CAUTION!
means that if the corresponding safety measures are not taken, a potentially
hazardous situation can occur that may result in slight bodily injury.
Caution
means that damage to property can occur if the corresponding safety mea-
sures are not taken.