Kemppi MTP 350 User manual

Operating manual • English
操作手册 • 中文
EN
ZH
MTP
350, 350P, 500, 500P
mtp_350_500_1925810_1225.indd 1 2.7.2012 9:07:53

mtp_350_500_1925810_1225.indd 2 2.7.2012 9:07:53

EN
OPERATING MANUAL
English
MTP 350, 350P, 500, 500P / © Kemppi Oy / 1225
mtp_350_500_1925810_1225.indd 1 2.7.2012 9:07:53

EN
CONTENTS
1. PREFACE.................................................................................................................3
1.1 Introduction...............................................................................................................3
1.2 Product introduction ............................................................................................3
1.3 Operation safety......................................................................................................3
2. CONNECTING THE GUN........................................................................4
3. USE AND MAINTENANCE...................................................................5
4. OPERATION DISTURBANCES.........................................................6
5. ORDERING NUMBERS............................................................................7
6. TECHNICAL DATA........................................................................................9
2
MTP 350, 350P, 500, 500P / © Kemppi Oy / 1225
mtp_350_500_1925810_1225.indd 2 2.7.2012 9:07:53

EN
1. PREFACE
1.1 INTRODUCTION
Congratulations on having purchased this product. Properly installed,
Kemppi products should prove to be productive machines requiring
maintenance at only regular intervals.
This manual is to give you a good understanding of the equipment and
its safe operation. It also contains maintenance information and technical
specications. Read this manual from front to back before installing,
operating or maintaining the equipment for the rst time. For further
information on Kemppi products please contact us or your nearest Kemppi
distributor.
Please also study the Operation safety instructions and respect them when
installing, operating and servicing the product.
1.2 PRODUCT INTRODUCTION
KEMPPI MTP MIG/MAG guns for manual welding are designed for demanding
professional use. MTP 350 and 500 are suitable to be used in all gas cooled
MIG units equipped with Euro adapter.
MTP 350P and 500P are suitable to be used in all gas cooled MIG units
equipped with Panasonic adapter.
1.3 OPERATION SAFETY
Please study these Operation safety instructions and respect them when
installing, operating and servicing the machine.
Welding arc and spatters
Welding arc hurts unprotected eyes. Be careful also with reecting arc
ash. Welding arc and spatter burn unprotected skin. Use safety gloves and
protective clothing.
Danger for re or explosion
Pay attention to re safety regulations. Remove ammable or explosive
materials from welding place. Always reserve sucient re-ghting
equipment on welding place. Be prepared for hazards in special welding jobs,
eg. for the danger of re or explosion when welding container type work
pieces.
Note! Fire can break out from sparks even several hours after the welding work
has been nished!
3
MTP 350, 350P, 500, 500P / © Kemppi Oy / 1225
mtp_350_500_1925810_1225.indd 3 2.7.2012 9:07:53