Kenwood Titanium Chef Baker XL KVC85 User manual

TYPE KVC85
TYPE KVL85
instructions

English 2 - 14
´¸∂w
٢٥ - ١٥

5L
KVC85 Chef
11 – Bowls
KVL85 Chef XL
3.5L
7L
5L
10 – Easy weigh scales
b ca
13
11
12
2
3
414
15
16
18
17
19
5
1
9
10
7
6
8
A
B
C
D

A B C
D E F
G H I
J K L
To Use Your Stand Mixer
To Use the Weighing Function
V W X
To Assemble the Creaming Beater
M N O
To Fit And Use Your Splashguard Tool Adjustment
P Q R
To Fit and Remove the Head Cover
S T U

A B C
D E F
G H I
J K L
To Use Your Stand Mixer
To Use the Weighing Function
V W X
To Assemble the Creaming Beater
M N O
To Fit And Use Your Splashguard Tool Adjustment
P Q R
To Fit and Remove the Head Cover
S T U

Know Your Kenwood Stand Mixer
Congratulations on buying a Kenwood. With such a wide range of attachments available,
it is more than just a mixer. It is a state-of-the-art Stand Mixer. We hope you will enjoy it.
Robust. Reliable. Versatile. Kenwood.
2
Safety
lRead these instructions carefully and retain for
future reference.
lRemove all packaging and any labels.
lIf the plug or cord is damaged it must, for safety
reasons, be replaced by Kenwood or an authorised
Kenwood repairer in order to avoid a hazard.
lTurn the speed control to ‘O’ OFF position
and unplug before fitting or removing tools/
attachments, after use and before cleaning.
l
Keep body parts, hair and jewellery and loose clothing
away from moving parts and fitted attachments.
lNever leave the Stand Mixer unattended when it is
operating.
lNever use a damaged appliance. Get it checked or
repaired: see ‘Service and Customer Care’ section.
lNever operate the Stand Mixer with the head in the
raised position.
lNever put your fingers into the hinge mechanism.
lNever let the cord hang down where a child could
grab it.
lNever let the power unit, cord or plug get wet.
lNever use an unauthorised attachment or more than
one attachment at once.
lNever exceed the quantities stated in the maximum
capacity chart
lWhen using an attachment, read and follow the
safety instructions that are supplied with it.
lTake care when lifting this appliance as it is heavy.
Ensure the head is correctly latched in the down
position and that the bowl, tools, outlet covers and
cord are secure before lifting.
lTake care when removing bowl tools after extended
use as they may get hot.
English

lChildren should be supervised to ensure that they
do not play with the appliance.
lDo not move or raise the mixer head with an
attachment fitted as the Stand Mixer could become
unstable.
lWhen moving the appliance always pick up by the
pedestal base and mixer head. Do not lift or carry
the appliance by the bowl handle.
lDo not operate your appliance near the edge or
overhanging the work surface or apply force to an
attachment when fitted, as this may cause the unit
to become unstable and tip over, which may result
in injury.
lThe short power-supply cord is used to reduce risk
resulting from becoming entangled in or tripping.
Extension cords may be used if care is exercised in
their use. If an extension cord is used: 1) The marked
electrical rating of the extension cord should be
at least as great as the electrical rating of the
appliance; and 2) The cord should be arranged so
that it will not drape over the countertop or tabletop
where it can be pulled on by children or tripped
over unintentionally. 3) The extension cord should
be an earthed-type 3-wire cord. The electrical rating
of the appliance is listed on the bottom of the unit.
lAppliances can be used by persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given
supervision or instruction concerning use of the
appliance in a safe way and if they understand the
hazards involved.
lMisuse of your appliance can result in injury.
lThis appliance shall not be used by children. Keep
the appliance and its cord out of reach of children.
lThe maximum rating is based on the mini chopper/
mill attachment that draws the greatest load. Other
attachments may draw less power.
3

KVC85 only
lNever use the splashguard with the 3.5L bowl.
Splashguard only suitable for use with the 5L bowl
lDo not fit a bowl tool to the stand mixer when the
3.5L bowl is stacked in the 5L bowl.
lFor kneading bread dough use the 5L bowl only.
KVL85 only
lNever use the splashguard with the 5L bowl.
Splashguard only suitable for use with the 7L bowl
lDo not fit a bowl tool to the stand mixer when the
5L bowl is stacked in the 7L bowl.
lFor kneading bread dough use the 7L bowl only.
lOnly use the appliance for its intended domestic
use. Kenwood will not accept any liability if the
appliance is subject to improper use, or failure to
comply with these instructions.
Before plugging in
l Make sure your electricity supply is the same as the one shown on the underside of your
appliance.
Important – Plug and Fuse Information
l The wires in the cord are coloured as follows:
Green and Yellow = Earth
Blue = Neutral
Brown = Live
l If the plug supplied with your appliance has a fuse fitted it is rated either 10A or 13A. If
the fuse fails it must be replaced with one of the same rating.
l If the plug or cord requires replacing a new cord set should be fitted by an Authorised
Kenwood Repairer.
l WARNING: THIS APPLIANCE MUST BE EARTHED.
Note:
l For non-rewireable plugs the fuse cover MUST be refitted when replacing the fuse. If the
fuse cover is lost then the plug must not be used until a replacement can be obtained.
The correct fuse cover is identified by colour and a replacement may be obtained from
your Kenwood Authorised Repairer (see Service).
l If a non-rewireable plug is cut off it must be DESTROYED IMMEDIATELY. An electric
shock hazard may arise if an unwanted non-rewireable plug is inadvertently inserted into
a 13A socket outlet.
l This appliance conforms to EC Regulation 1935/2004 on materials and articles intended
to come into contact with food.
4 5

Before Using For The First Time
l Wash the parts: see ‘Care and
Cleaning’ section.
Key
Attachment Outlets
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
High-speed outlet
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Slow-speed outlet
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Bowl tool socket
Mixer
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
High speed outlet cover
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Mixer head
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Mixer ready indicator light
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Speed control dial
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Head release lever
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Power unit
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Easyweigh scales
adisplay screen
b On/Zero button
c kg/lb button
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Bowls
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Slow speed outlet cover
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Head Cover
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
K-beater
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Whisk
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Dough tool
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Creaming beater
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Spatula
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Splashguard
Note: Spanner shown is for illustration
purposes only and is not supplied in
pack.
Optional Attachments
There are a range of optional
attachments available to use with
your Stand Mixer. See the attachment
leaflet included in your pack or visit
www.kenwoodworld.com to see the full
range and how to buy an attachment
not included in your pack.
Note: Slow Speed Outlet Attachments
The slow speed outlet on your Stand
Mixer model features the Twist
Connection System. It is designed
to accept Twist Connection System
attachments.
When purchasing new attachments for
the slow speed outlet you should check
compatibility with your Stand Mixer. All
Twist Connection System attachments
can be identified by the product code
which starts with KAX and also by
the Twist logo which is visible on
packaging. For more information visit
www.kenwoodworld.com/twist.
If you own attachments featuring the
Bar Connection System you will
need to use the KAT002ME adaptor to
connect these to the Twist Connection
System on your Stand Mixer.
For more information visit
www.kenwoodworld.com/twist.
To Use Your Stand Mixer
Refer to Illustrations
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z
–
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z
1 Push the head-lift lever down and
raise the mixer head until it locks.
2 Fit the bowl, turn clockwise to lock.
3 Place the required tool into the
socket. Then push up and turn the
tool to lock into position.
Note: If the K-beater or Whisk are
not picking up ingredients from the
bottom of the bowl refer to the “Tool
Adjustment” section.
4 Lower the mixer head by pushing the
head release lever down and lower
the mixer head until it locks.
5 Plug into the power supply. Start
the machine by turning the speed
control to the desired speed setting.
Use the pulse (P) position for short
bursts of maximum speed.
6 After use, return the speed control
to ‘O’ OFF position and unplug your
Stand Mixer.
7 Release the tool by turning clockwise
to unlock from the tool socket and
then remove.
4 5

Hints
l The fold function can be used for
folding light ingredients into heavier
mixtures for example meringues,
mousses, fruit fools, Genoese
sponges and soufflés, and to slowly
incorporate flour and fruit into cake
mixtures. The mixer will operate at a
constant slow speed.
Important
Ensure that no bowl tools are fitted or
stored in the bowl when using other
outlets.
To Use The Weighing
Function
Refer to Illustrations
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z
–
A B C D E F G H I J
KL M N O P Q R S T
U V W X Y Z
1 Fit the bowl.
2 Press the on/zero button, the display
screen will flash ---- followed by 0.
3 Press the (kg/lb) button to select
either grams or ounces. The display
will default to kg/g when first
switched on.
* The unit weighs in 1g increments
and teaspoon/tablespoon measures
are recommended for weighing small
quantities.
* To zero press the on/zero button once.
4 Weigh the required ingredients
straight into the bowl.
Note: Always place the appliance on a
dry, flat, stable surface prior to weighing.
Do not apply pressure to the mixer or
bowl whilst weighing as this will affect
the accuracy of the scales. The weighing
function can be used with the mixer
head in either the down or up position.
Count up timer
l During operation the display screen
will automatically operate as a count
up timer.
l The timer will count up to 30
minutes and will pause (for up to 30
secs) when ever the speed control is
turned to the 'O' position.
l To reset the timer to zero when the
machine is running press the ON/
ZERO button.
6 7

Recommended Usage Chart
• This is for guidance only and will vary depending on the exact recipe and ingredients
being processed.
K-beater
For making cakes, biscuits, pastry, icing, fillings, eclairs and mashed
potato.
Hints and Tips
• To avoid splashing of ingredients gradually increase the speed.
• To fully incorporate the ingredients, stop mixing and scrape down
the bowl with the spatula frequently.
• Use cold ingredients for pastry unless your recipe says otherwise.
Recipe/ Process
(Max) (Minutes)
KVC85 Chef
KVL85 Chef XL
3.5 L *5 L *5 L 7 L
Pastry &
Biscuits –
rubbing fat into
flour
Flour
Weight
340g
680g 500g 910g Min  12
All In one cake
mixes
Total
Weight
800g 2kg 2kg 4kg Min 
Max
45 – 60 secs
Creaming Beater
For creaming and mixing soft ingredients.
Hints and Tips
• To avoid splashing of ingredients gradually increase the speed.
• When creaming fat and sugar for cake mixes, always use the fat at
room temperature or soften it first.
Recipe/ Process
(Max) (Minutes)
KVC85 Chef
KVL85 Chef XL
3.5 L *5 L *5 L 7 L
Creaming butter/
margarine and sugar
890g 2.6kg 1.8kg 4.5kg Min 
Max
4
Beating eggs into cake
mixes
Min 
Max
1 – 4
Folding in flour, fruit etc Min  130 – 60 secs
Eggs sizes used = medium sized (Weight 53 – 63g).
* Lower max capacity when using 5L bowl on KVL85 machine. This is due to using
smaller capacity bowl with the Chef XL size bowl tools.
6 7

Recommended Usage Chart
• This is for guidance only and will vary depending on the exact recipe and ingredients
being processed.
• For best results, always use soft room temperature butter and margarine when
making cakes.
Whisk
For eggs, cream and soufflés.
Important
• To avoid splashing of ingredients gradually increase the speed.
•
Do not use the whisk for heavy mixtures (all in one cakes and
creaming fat & sugar) as you could damage it.
• Best results achieved when eggs are at room temperature.
Before whisking egg whites, make sure there is no grease or egg yolk
on the whisk or the bowl.
Recipe/ Process
(Max) (Minutes)
KVC85 Chef KVL85 Chef XL
3.5 L *5 L *5 L 7 L
Egg Whites 6
(210g)
12
(420g)
8
(280g)
16
(560g) Min Max
1½ - 2
Fatless Sponge 620g 930g 620g 930g 4-6
Cream 0.35L 1L 0.5L 2L Min 4-6 1 ½ - 3
Mayonnaise
• For best results
scrape down the
bowl after the
addition of the
oil and run for a
further 10 secs at
max speed.
2 Egg Yolks
10g Mustard
200mls Vegetable Oil
Max 1 – 1 ½
Pancake Batter
• Add flour to
the bowl first,
followed by the wet
ingredients.
• Mix on minimum
speed to
incorporate
ingredients.
250g Flour
500g Milk
200g Eggs
‘Min’ speed
for 10
secs. Then
increase to
max speed
for 45 – 60
secs
1
Eggs sizes used = medium sized (Weight 53 – 63g).
Whipping cream used = Fresh Whipping cream with minimum 38% Fat content.
* Lower max capacity when using 5L bowl on KVL85 machine. This is due to using smaller
capacity bowl with the Chef XL size bowl tools.
8 9

Recommended Usage Chart
• This is for guidance only and will vary depending on the exact recipe and ingredients
being processed.
Dough Tool
For yeasted dough mixes
Hints and Tips
Important
• Use the largest bowl supplied with your machine for kneading
dough.
KVC85 - 5L Bowl
KVL85 - 7L Bowl
• Never exceed the maximum capacities and speeds stated – you
may overload the machine.
• If you hear the machine labouring, switch o, remove half the dough
and do each half separately.
• The ingredients mix best if you put the liquid in first.
Yeast
• Dried Yeast (the type that needs reconstituting): pour the warm
water into the bowl. Then add the yeast and sugar and leave to
stand for 10 minutes until frothy.
• Fresh yeast: crumble into the flour
• Other types of yeast: follow the manufacturer’s instructions.
Put the dough into a greased polythene bag or a bowl covered with a
tea towel. Then leave somewhere warm until doubled in size.
Recipe/ Process
(Max) (Minutes)
KVC85 Chef
*5L Bowl
KVL85 Chef XL
7L Bowl
Min Max Min Max
Bread Dough
(stiff yeasted)
Warm Water 195g 755g 195g 895g Min
1
60 secs
3-4
Strong White
Bread Flour
350g 1.36kg 350g 1.6kg
Fast Action
Yeast
6g 22g 6g 25g
Lard 10g 27g 10g 30g
Salt 3g 14g 3g 16g
Total Weight 564g 2.18kg 564g 2.56kg Re-knead
Speed 1
60 secs
Soft yeasted
dough
(enriched with
butter and
eggs)
Flour Weight 250g 1.3kg 250g 1.6kg Min
1
60 secs
3-4
Total Weight 478g 2.5kg 478g 3.1kg
Re-knead
Speed 1
60 secs
Eggs sizes used = medium sized (Weight 53 – 63g).
8 9

To Fit And Use Your
Splashguard
Refer to Illustrations
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z
–
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z
1 Raise the mixer head until it locks.
2 Fit the bowl onto the base.
3 Push the splashguard onto the
underside of the mixer head until fully
located. The hinged section should be
positioned as shown.
4 Insert required tool.
5 Lower the mixer head.
l During mixing, ingredients can be
added directly to the bowl via the
hinged section of the splashguard.
l You do not need to remove the
splashguard to change tools.
6 Remove the splashguard by raising
the mixer head and pushing it down.
Tool Adjustment
Refer to Illustrations
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z
K-beater & Whisk
The tools are set to the correct height
for the bowl supplied in the factory and
should not require adjustment.
However, if you wish to adjust the tool
use a suitable sized spanner:
TYPE KVC85 = 15mm
TYPE KVL85 = 19mm
Then follow the instructions below:
1 Unplug the appliance.
2 Raise the mixer head and insert the
whisk or beater.
3 Lower the mixer head. If the
clearance needs to be adjusted,
raise the mixer head and remove the
tool. Ideally the whisk and K-beater
should be almost touching the
bottom of the bowl.
4 Using a suitable spanner loosen the
nut sufficiently to allow adjustment
of the shaft. To lower the tool closer
to the bottom of the bowl, turn the
shaft anti-clockwise. To raise the tool
away from the bottom of the bowl
turn the shaft clockwise.
5 Re-tighten the nut.
6 Fit the tool to the mixer and lower
the mixer head. (Check its position
see points above).
7 Repeat the above steps as necessary
until the tool is set correctly. Once
this is acheived tighten the nut
securely.
l Note: Spanner shown is for
illustration purpose only.
Dough Tool
This tool is set at the factory and should
require no adjustment.
To Fit and Remove Head
Cover
Refer to Illustrations
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z
–
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z
1 Remove the slow speed and high
speed outlet covers.
2 With the retention clip pressed in, lift
up the head cover and slide forward.
3 To fit an alternate head cover, insert
the pegs on the end of the head
cover into the two holes on the slow
speed outlet.
4 Whilst pressing the retention clip,
push the head cover down into place
on the mixer head.
5 Replace slow speed and high speed
outlet covers.
To Assemble The Creaming
Beater
Refer to Illustrations
A B C D E F G H I J
K L M N O P Q R S T
UV W X Y Z
–
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z
Fitting The Wiper Blade
l The wiper blade is supplied already
fitted and should always be removed
before cleaning.
1 Carefully fit the flexible wiper blade
onto the tool by locating the base
of the wiper blade into the slot then
fit one side into the groove before
gently hooking the end in place.
Repeat with the other side.
10 11

Care & Cleaning
l Always switch off and unplug before
cleaning.
l A little grease may appear at the
slow speed outlet 2when you first
use it. This is normal – just wipe it off.
Power Unit, Outlet Covers and Head
Cover
l Wipe with a damp cloth, then dry.
l Never use abrasives or immerse in
water.
Bowls
l Wash by hand, then dry thoroughly
or wash in the dishwasher.
l Never use a wire brush, steel wool
or bleach to clean your stainless
steel bowl. Use vinegar to remove
limescale.
l Keep away from heat (cooker tops,
ovens, microwaves).
Tools & Splashguard
l Wash by hand, then dry thoroughly
or wash in the dishwasher.
Recipe
Prune Marinade
185g Clear Runny Honey
25g Soft Prunes
25ml Water
1 Place all ingredients into the mini
chopper/mill. Refrigerate overnight.
2 Fit the attachment to the Stand
mixer.
3 Switch to pulse for 6 seconds.
4 Use as required.
Service and Customer Care
lIf you experience any problems with the operation of the appliance, before calling
for assistance refer to the ‘Troubleshooting Guide’ or visit www.kenwoodworld.com.
UK
If you need help with:
lusing your appliance or
lservicing, spare parts or repairs (in or out of guarantee)
Zcall Kenwood customer care on 0345 222 0458. Have your model number
(e.g. TYPE KVC85 and KVL85) and date code (5 digit code e.g. 21T04) ready. They
are on the underside of the power unit.
lSpares and Attachments
Z call 0844 557 3653.
Other countries
l If you experience any problems with the operation of your appliance, before
requesting assistance refer to the ‘Troubleshooting Guide’ section in the manual or
visit www.kenwoodworld.com.
l Please note that your product is covered by a warranty, which complies with all legal
provisions concerning any existing warranty and consumer rights in the country where
the product was purchased.
l If your Kenwood product malfunctions or you find any defects, please send it or bring
it to an authorised KENWOOD Service Centre. To find up to date details of your
nearest authorised KENWOOD Service centre visit www.kenwoodworld.com or the
website specific to your Country.
l Designed and engineered by Kenwood in the UK.
l Made in China.
10 11

Troubleshooting Guide
Problem Cause Solution
The whisk, K-beater
knocks against the
bottom of the bowl
or not reaching the
ingredients in the
bottom of the bowl.
Tool at the wrong height
and needs adjusting.
Adjust the height using a
suitable spanner – see “Tool
Adjustment” section.
Slow speed attachment
cannot be fitted.
Check your attachment is
compatible for use with
your model.
Twist connection system
required (Model KAX)
Attachment must have the KAX
twist connection system to
fit the outlet.
If you own attachments
featuring the Bar Connection
System you will need to
use the KAT002ME adaptor
to connect these to the Twist
Connection System on your
Stand Mixer.
For more information visit
www.kenwoodworld.com/twist.
‘Mixer ready indicator
light’ flashing when
Stand Mixer first
plugged in.
Speed control not in the ‘O’
position.
Mixer head in the raised
position or not locked
down correctly.
Check and turn speed control to
the ‘O’ position.
Check Stand Mixer head is
locked down correctly.
Guarantee UK only
l If your Stand Mixer goes wrong within
one year from the date you bought
it, we will repair it (or replace it if
necessary) free of charge provided:
l it has been used in accordance with
these instructions.
l you have not misused, neglected, or
damaged it;
l it has not been modified (unless by
KENWOOD);
l it is not second hand;
l it has not been used commercially;
l you have not fitted a plug incorrectly;
and
l you supply your receipt to show when
you bought it.
This guarantee does not affect your
statutory rights.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN
ACCORDANCE WITH THE EUROPEAN DIRECTIVE ON WASTE ELECTRICAL AND
ELECTRONIC EQUIPMENT (WEEE)
At the end of its working life, the product must not be disposed of as urban waste. It must
be taken to a special local authority differentiated waste collection centre or to a dealer
providing this service.
12 13

Troubleshooting Guide - Continued
Problem Cause Solution
The Stand Mixer stops
during operation.
Weighing display
shows error message
E26 or E27.
Overload protection or
overheat system activated.
Maximum capacity
exceeded.
Unplug and check for
obstruction or overloading.
Turn the speed control to “O”
and then restart.
If the machine will not operate,
remove some of the ingredients
to reduce the load and restart.
If this still does not resolve the
problem, unplug and allow to
stand for 15 minutes. Plug in
and reselect the speed.
If the machine does not restart
following the above procedure
contact “ customer care” for
further advice.
‘Mixer ready indicator
light’ o whilst machine
plugged in.
Stand Mixer has been left
plugged in for more than
30 minutes without being
operated and has
gone into Standby mode.
Turn the speed control to ‘min’
then return to ‘O’ to reset the
machine.
Weighing Function
Display screen freezes
on [- - - -]
The display screen will
freeze during operation.
Display screen showing
a minus reading due to
display not ‘zeroed’ and
either ingredients or the
bowl has been removed.
Quantity weighed too
small.
Normal operation.
Either zero the screen or
replace the missing ingredients
or refit the bowl.
Use teaspoon and tablespoon
measures for very small
quantities.
Weight changed on
display
Stand Mixer moved during
operation.
Always place the Stand Mixer
on a dry flat surface prior to
weighing.
Do not move the Stand
Mixer during operation of the
weighing function.
Zero the display before
weighing next ingredients
12 13

Troubleshooting Guide - Continued
Problem Cause Solution
Display screen turned
o
Stand Mixer unplugged.
The display screen will
turn o automatically if
the same weight reading is
shown after 5 minutes.
Plug appliance in.
Press the ON/ZERO button
once and the display screen will
light up.
Display showing
[0 – Ld]
Weighing function
overloaded
Excessive force applied to
Stand Mixer.
Do not exceed the maximum
weighing capacity of 6Kg.
Do not subject the Stand Mixer
to excessive force as this may
damage the weighing sensor.
14 PB



«
»









»min«
»O«

Ë™OHW «∞u“Ê
®U®W «∞Fd÷ £U°∑W ´Kv «∞u{l
]- - - -[




""

«∞JLOW «∞Lu“Ë≤W ÅGOd… §b«Î




/
/
¢r ¢GOOd «∞u“Ê ´Kv ®U®W
«∞Fd÷ ¢r ¢GOOd «∞u“Ê ´Kv ®U®W «∞Fd÷ «∞∑AGOq




Æu±w °∑FOOs «∞BHd ´Kv ®U®W «∞Fd÷ Æ∂q Ë“Ê
«∞LJu≤U‹ «∞∑U∞OW.









)/(ON/ZERO


]Ld–0[



















.»«-




Twist 
connection system
)( )KAX (
Twist  KAX 
 connection system
 Bar 
،connection system

 KAT002ME 
Twist
connection system

:
www.kenwoodworld.com/twist
“
”





.»O«





.»O« 





.E27E26












»O«









»«

