Keys Fitness Power System KPS-LATA User manual

O
OWNER’S
WNER’S MANU
MANU
AL
AL
KPS-LATA
LAT ATTACHMENT
Questions?
Call our toll free Keys Fitness Helpline
1-800-683-1236

V
THANK YOU for making this Power System unit a part of
your exercise program. Keys Fitness and our Power System
Series assures the very best in value, appearance, durability
and biomechanics.
This manual will guide you through the assembly process. If at any time
you are having trouble with the assembly or use of this product, then
please contact us at our Keys Fitness Helpline. We have trained service
technicians on site to take care of you, our valued customer.
POWER SYSTEM SERIES
MODEL: KPS-LATA
QUESTIONS?
CALL
1-800-683-1236
Monday-Friday
8:30-5:30 Central Time
When calling please have the following product information available:
• Product Series
• Model #
• Part Number
• Part Description
REGISTRATION CARD
To avoid unnecessary delays in warranty parts and to insure that a perma-
nent record of your purchase is on file with our company, be sure to send
in the warranty registration card or register on-line at www.keysfitness.com
within 10 days of purchase.

BEFORE YOU START
Prior to assembly, remove components from the box and verify that all the listed parts
were supplied.
Before using this unit or starting any exercise program, consult your physician. This is
especially important for persons over the age of 35 and/or persons with pre-existing
health problems. Keys Fitness Products LP assumes no responsibility for personal
injury or property damage sustained by or through the use of this product.
It is the owner’s responsibility to ensure that all users of this unit have read the Owner’s
Manual and are familiar with safety information and precautions.
SAFETY INFORMATION WARNING!
X
SAFETY PRECATIONS
• This Power System unit should only be used on a level surface and is intended for
indoor use only. Keys Fitness recommends an equipment mat be placed under the
unit to protect the floor or carpet and for easier cleaning.
• Wear comfortable, good-quality walking or running shoes and appropriate clothing.
Do not use this unit with bare feet, sandals, socks or stockings!
• Always examine your unit before using to ensure all parts are in working order.
• Do not leave children unsupervised near or on the unit.
• Service to your Power System unit should only be performed by an authorized serv-
ice representative, unless authorized and/or instructed by a Keys Fitness technician.
Failure to follow these instructions will void the warranty.

ASSEMBLY
STEP 1
Y
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Slide Square Slide Guide (10) into the front of your bench.
For a low pulley foot brace, attach components pictured to the
front of your bench frame base using:
2 x (11) Plate
1 x (12) Foot Tube
2 x (18) Bolt ( 2x(27) Bolt for the big front tube bench)
4 x (16) Washer
2 x (15) Nylon Lock Nut

ASSEMBLY
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Z
STEP 2
Slide Stop Base (1) down onto Square Slide Guide (10) as
shown and secure using:
2 x (17) Bolt
4 x (16) Washer
2 x (15) Nylon Lock Nut

[
ASSEMBLY
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
STEP 3
Slide Weight Slide (2) down onto Square Slide Guide (10) and
let rest on Stop Base (1).

\
STEP 4
Connect Top Frame (3) to Square Slide Guide (10) using:
2 x (17) Bolt
4 x (16) Washer
2 x (15) Nylon Lock Nut
ASSEMBLY
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.

]
STEP 5
Attach Cable (8) as shown using:
4 x (4) Pulley
1 x (24) Small Pulley
3 x (19) Bolt
1 x (18) Bolt
8 x (16) Washer
4 x (15) Nylon Lock Nut
ASSEMBLY
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
6

PARTS LIST
# DESCRIPTION QTY
1 Stop Base 1
2 Weight Slide 1
3 Top Frame 1
4 Pulley 4
5 Long Bar 1
6 Short Bar 1
7 Spring Clip 2
8 Cable 1
9 Chain 1
10 Square Slide Guide 1
11 Plate 2
12 Foot Tube 1
13 Grip 25 4
14 Plastic Button 8
15 Nylon Lock Nut M10 10
16 Washer 10 20
17 Bolt M10x65 4
18 Bolt M10x75 3
19 Bolt M10x45 3
20 Plug 25 4
21 Plug 50.8x50.8 3
22 Snap Link 3
23 Plastic Sleeve For Spring Clip 4
24 Small Pulley 1
25 Bumper 1
26 Rubber Sleeve 2
27 Bolt M10x105 2
^

u
EXPLODED VIEW