Kilotech Integrator LE.3k User manual

LE.3k
Guide for Network configuration.
This manual is available at www.kilotech.com

2
Network configuration
This electronic scales comes ready to work automatically from the factory in a network that has a DHCP
protocol configured (automatic connection like the modem of the internet for the house). In that case, you
only need to connect the scale to the modem by an ethernet cable, and you will establish a communication
with your computer and the software for scales LE3K.
From your browser, go to: www.kilotech.com/english/products/retailposintegrator/LE.3K/
and download the software for the scale.
LE.3k User Login
1. Click on the Le.3k icon on your desktop
2. Depending on your OS or administration settings, a permission box will appear.
Click on "Yes"
3. The login box will appear.
4. Simply click on "Login". No need to type a user name or password.
5. For dealers the user name is admin. The Password is 200806.
Please do not share this with your client.
Check if the Scale is on the Network
1. On the home screen, select "File" from the top menu bar
2. From that drop down menu list, select "Import/Export"
3. Select "Ethernet"
4. Click on the maximize button in the top right hand corner to enlarge.
5. If the scale is online, it will show ready in the network status.
In case that you need to make a configuration of the IP address please follow the next steps.
1. Press + to enter into the programing mode.
2. Press
3. Press 150 and then press . Now you can digit the first part (first octet) of the Scale IP
Address.

3
4. You can use the or keys to move back or forward to the next octet of the IP address and you
can use or keys to increase or decrease the number for the octet.
The setup of scale IP address is between the specs 150-153.
For example if you want to set the IP Address 192.168.0.3 uses the follow guideline:
Spec 150=192
Spec 151=168
Spec 152=0
Spec 153=3 Note: if the final octet is 0 the scale will set to DHCP instead of static IP address
5. In the same order the Specs 154, 155, 156 and 157 are for the IP address of the server or PC, where the
LE3K software is installed.
Spec 154=192
Spec 155=168
Spec 156=0
Spec 157=5
6. The Specs 158, 159, 160 and 161 are for the Gateway IP address.
Specs 158=192
Specs 159=168
Specs 160=0
Specs 161=1
7. The Specs 162, 163, 164 and 165 are for the IP address Subnet Mask.
Specs 162=255
Specs 163=255
Specs 164=255
Specs 165=0
8. The Specs 170, 171, 172 and 173 are for Primary DNS.
9. Press the key.

4
Quick Way to Configure IP Address and Other Network Information in Windows
7
As you know IP address must be configured on computer in order to communicate with other computers, in our
case scales, because this IP address is the standard address understood by computers and other networking
devices in networking world.
You can configure IP address, subnet mask, gateway and DNS servers manually on computer, but you can also
configure computer to obtain IP address and other network information from DHCP server (most of the time is
configured on router).
1) Go to Start and click on Control Panel.
2) Proceed to click View network status and tasks in Control Panel window.
3) Network and Sharing Center window will appear, then click change adapter settings.
4) Network Connections window will appear. Here you can right click on the network adapter (can be wireless
adapter or wired Ethernet adapter) that you wish to configure and click Properties.

5
5) In the Network Connection Properties window, tick on Internet Protocol Version 4 (TCP/IPv4) and
click Properties.

6
Manual IP Assigning
If you wanna do manual configuration, you can now key in the IP address, Subnet mask, Default gateway and
DNS servers.
Note: IP address of your computer must be unique. None of the 2 computers in the same network can share
same IP address, because it will cause IP address conflict.
Note: Default gateway is a router that can route the traffic to the other network or Internet.
Click OK.
Click Ok again.
Close the windows of network connections.
Turn off and turn on the scale.
Open the LE3K software and you will see the scale.
Done.
IP Assigned by DHCP server
If you have DHCP server setup on your router or you have dedicated DHCP server, your computer can be assigned
IP address and other network information automatically by selecting Obtain an IP address
automatically and Obtain DNS server address automatically.

7
Note: If you have a notebook, and you use static IP at home and the IP assigned by DHCP server at the office, you
can make use of alternate configuration to set IP and network information for these 2 different networks.
Set Obtain an IP address and DNS automatically on General tab as according to what I specified above, so that
the notebook will be assigned IP addresses automatically at the office. After that, click Alternate
Configuration tab, select User configured option and key in your home network’s static IP and other network
information. By setting this, when there is no IP information assigned due to no DHCP server at home, this
alternate configuration will be applied automatically, so that you don’t have to spend time on configuring IP
manually every time at home.