Knight Cubit Credenza User manual

knightgroup.co.nz
Tools Required: Powered Screwdriver
Assembly Instructions
Cubit Credenza

Page 1
Assembly Instructions
knightgroup.co.nz
Cubit Credenza
• To prevent possible scratches or damage, assemble
the credenza on a soft surface such as a blanket,
carpet or packaging.
Recommended
2-person Step
Item Decription Quantity
A Top Panel 1
X Left side panel 1
Z Right side panel 1
D Back panel 1
G Bottom panel 1
E Moveable shelf 2
V1 Door panel 1
V2 Door panel 1
V3 Door panel 1
V4 Door panel 1
Y Vertical panel 1
Item Decription Quantity
c1 6x35 Cam Bolt 24
d1 8x30 Dowel Pin 24
c2 (5/8”)Cam Cover 24
h4 Handle 4
s7 4x22 Fix Bolt 8
s1 4x16 Screw 32
g2 Big curve Hinge &
Mout Plate 4
g3 Small curve hinge &
Mount Plate 4
g1 Hinge Stand 8
p1 Threaded Dowel Pin 8
s13 4x25 Screw 18
m2 Metal Leg 6
PARTS LIST
IMPORTANT:
Please note the dierence between parts g2 and g3.
Each hinge is specically designed for their unique position.
Correct installation is essential for a successful assembly of this credenza.

Page 2
Assembly Instructions
knightgroup.co.nz
Step 1
Page 2
Assembly Instructions
Preparation for top panel A, bottom panel G, left side panel X, right side panel Z, vertical panel Y, door
panel V1, V2, V3 & V4.
Cubit Credenza
IMPORTANT:
Please note the difference between parts
g2 and g3.
Each hinge is specifically designed for their
unique position.
Correct installation is essential for a successful
assembly of this credenza.
1. Insert cams bolts (c1) and dowel pins (d1) into panels A, G, X and Z as illustrated above.
2. Fix hinge stands (g1) to panels X, Z and Y with screws (s1) as illustrated above.
3. Fix hinge bodies (g2) to panels V1 and V4 with screws (s1) as illustrated above.
4. Fix hinge bodies (g3) to panels V2 and V3 with screws (s1) as illustrated above.
5. Fix handle (h4) to panels V1, V2, V3 and V4 with fix bolts (s7) as illustrated above.
6. Fix metal leg (m2) to panel G with screws (s13) as illustrated above.

Page 3
Assembly Instructions
knightgroup.co.nz
Page 3
Assembly Instructions
Step 2
Cubit Credenza
Top panel A, back panel D, left side panel X, right side panel Z, vertical panel Y assembly.
1. Fix cams on panel X, Z, Y, D into cam bolts (c1) on panel A and tighen in a clockwise direction as
illustrated above.
Cams/Holes on the panel
Y should face to panel X.

Page 4
Assembly Instructions
knightgroup.co.nz
Page 4
Assembly Instructions
Insert threaded dowel pins (p1) in to panels X, Z and Y as illustrated above. Put the two panels E on the top of
threaded dowel pins (p1) as illustrated above.
Step 4
Fix cams on panel X, Y, Z and D into cam bolts (c1) on panel G and tighten in a clockwise direction as illustrated
above. Cover the cam covers (c2) on the top of all the cams.
Step 3
Cubit Credenza

Page 5
Assembly Instructions
knightgroup.co.nz
Page 5
Assembly Instructions
Step 5
Door panel V1, V2, V3 and V4 assembly.
Cubit Credenza

Page 6
Assembly Instructions
knightgroup.co.nz
Page 6
Assembly Instructions
Complete
Cubit Credenza