Kogan KAPB10KALBA User manual

10000MAH 18W
PD POWER BANK
BLACK ALUMINIUM
(KAPB10KALBA)

Caution!
•When using for the first time, note that the power bank will achieve its best
performance after two to three times fully charge and discharge.
•Extend the charging time for 1-2 hours in the first three times to maximise the
performance of polymer battery.
•Do not attempt to disassemble and modify the power bank.
•Avoid making physical damage to the power bank.
•Avoid using this product in the following environments: high temperature, low
pressure, low temperature, humidity, dust, magnetic field strong and long-term
exposure to sunlight.
•Recommended conditions for use are between 0°C to 35°C, with humidity of 5% -
95%.
•This product must not be exposed to dripping and splashing water. Keep away
from liquids, including cups that may spill.
•Follow the relevant local environmental regulations to dispose of the product and
accessories.
Tips:
•If you plan to not use the power bank for a long time, it is recommended to fully
charge the battery before storing, and to store it in a dry environment with a
temperature range from 5 - 35°C. Avoid direct exposure to sunlight.
•Fully discharge then perform full recharging if you have not used the power bank for
more than three weeks. Failure to do so may shorten battery life.
Environmental Claims
Name
Name and Content of Hazardous Substances
Pb
Hg
Cd
Cr (VI)
PBB
PBDE
Power bank
X
0
0
0
0
0
Accessories
0
0
0
0
0
0
O: Means the PH substances in the material is under the GB/T 26572 standard
X: Means the PH substances is out of the GB/T 26572 standard.
SAFETY & WARNINGS

In the box:
•1 x Power bank
•1 x USB Cable
•1 x Manual
OVERVIEW
Indicator light
USB Output Port2
USB Output Port1
Power
ON/OFF
Type-C input/output port
Micro USB Port

Power Display
After starting power bank, the in-built intelligent management system will perform a self-
test, and the screen will display the current power for each of the three outputs.
Digital display range: 0-100
100 = full power.
Status
Display
Power
Note
Charging the power
bank Flashing Digital precision display
While charging, if the display
reads “100” and is not
flashing, the power bank is
fully charged.
Providing charge to
attached devices Solid Digital precision display
During discharge (providing
power to devices), if the
display reads “00”, then the
power bank is out of power.
Not charging or
providing charge. Solid Digital no-precision display
Push the button and the
power bank will automatically
turn off after for 8 seconds
Charging the Power Bank
•Connect the cable USB port to the charging device and the other end to the Micro
input connector of the power bank.
•After connecting, the power bank is automatically charged and the current power
level on the battery status indicator flashes. When the battery is fully charged, the
status indicator light will be on.
Providing charge to attached devices
•Check whether the charging voltage of the digital device matches the discharging
voltage of the power bank.
•Select one matching charging cable, connect one end to the power bank output
interface, the other end to the digital device, the power bank will automatically
recognise to charge a digital device.
OPERATION

Battery type
Grade-A polymer battery cell
Capacity
10000mAh/37Wh (TYP)
Micro-USB Input
DC 5V/2.4A, 9V/2A
Type-C Input
PD 5V/3A, 9V/2A (18W Max)
Type-C Output
PD 5V/3A, 9V/2A, 12V/1.5A (18W Max)
USB Output 1
DC 5V/3A, 9V/2A, 12V/1.5A (18W Max)
USB Output 2
DC 5V/3A, 9V/2A, 12V/1.5A (18W Max)
Total Output
Maximum 18W
Product dimensions
141 x 71 x 16mm
Product weight
280g
SPECIFICATIONS

A
NOTES

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com