Kohler NEW ELOSIS K-77218T-R User manual

Grounding Instructions
WARNING: Risk of electric shock.
·
·
·
·
This product should be grounded. In the event of an
electrical short circuit, grounding reduces the risk of electric
shock by providing an escape wire for the electric current.
Improper use of
the grounding plug can result in a risk of electric shock.
If repair or replacement of the cord is necessary, do not
connect the grounding wire to either flat blade terminal. The
wire with insulation having an outer surface that is green
with or without yellow stripes is the grounding wire.
Check with a qualified electrician or service personnel if the
grounding instructions are not completely understood, or if
in doubt as to whether the product is properly grounded.
This product is factory equipped with a specific electric cord.
If the product must be reconnected for use on a different
type of electric circuit, the connection should be made by
qualified service personnel.
·
·
·
·
-1-
NEW ELOSIS
INSTALLATION INSTRUCTIONS
MIRRORED CABINET
K-77218T/K-77218T-R
BEFORE YOU BEGINBEFORE YOU BEGIN
·
·
·
·
·
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation . This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
All information in these instructions is based upon the latest
product information available at the time of publication.
Kohler China. reserves the right to make changes in
product characteristics, packaging, or availability at any
time without notice.
These instructions contain important care, cleaning, and
warranty information-
Before installation carefully inspect the new fixture for any
signs of damage.
This product complies with GB/T10357.4-2013,
GB/T10357.5-2013 and GB24977-2010.
Be
careful when opening the door to avoid pinching fingers.
Don't use acidic or alkalic cleaners or
alcohol to clean the surface. Use a dampened cloth to
clean.
Electrical wiring
may need to be relocated.
Use anchors
(not provided) rated for the loaded weight of this
product. Refer to the anchor manufacturer's instructions.
This cabinet is designed for
either right or left door swing. Check the wall cavity for
obstructions.
please leave instructions for the
consumer.
WARNING: Risk of injury or product damage.
WARNING:
CAUTION: Risk of electric shock.
CAUTION: Risk of property damage.
Important Information:
·
·
·
·
·
-
GB/T10357.4-2013 GB/T10357.5-2013
GB24977-2010
ZHONGSHAN KOHLER SHOWER CO., LTD. NO13-1, XINYE ROAD, ZHONGSHAN TORCH
DEVELOPMENT ZONE, ZHONGSHAN, GUANGDONG, CHINA POST CODE: 528437
13-1 528437
©
©
Copyright Kohler China Investment Co., Ltd. 2016
2016
1304452-T01-B

-2-
Kohler reserves the right to change marked dimensions without prior notice.
ACCESSORIS LISTACCESSORIS LIST
ROUGHING-IN
UNIT : mm
Reference Value
Glass Shelves
79*450*6mm
3PCS
Wall Anchors
4PCS
Top Clips
2PCS
Screw ST3.5X35
ST3.5X35
4PCS
Screw M4X9.5
M4X9.5
6PCS
Shelf Clip
14PCS
Mounting Bar
1PCS
Side Mirror
92*850*3mm
2PCS
Side Kits Brackets
6PCS
Caps of Screw
6PCS
Hole Plugs
40PCS
K-77218T-R
508
852
123.8
K-77218T
508
852
123.8
ROUGHING-IN
Item Electrical Function Type Description Fixate Place
1 1
2 2
Defogger
Lighting Input: 12V, Pmax=6W,
LED 3000K
Input: 12V, Pmax=15W Input: 12V, Pmax=15W
Input: 12V, Pmax=6W,
LED 3000K
Back of Outer-mirror
Back of Outer-mirror
ELECTRICAL PARTS LISTELECTRICAL PARTS LIST
TOOLS AND MATERIALS
Drill with Assorted Bits Assorted Screwdrivers Band Tape PencilLevelling Ruler
Plus:
!
!
Protective Material
Tape
!
!
1304452-T01-B

-3-
CABINET INSTALLATIONCABINET INSTALLATION
INSTALLATION
STEP
1
Drill holes
4- 6mm
4- 6mm
Drill holes
4- 6mm
4- 6mm
Screw ST3.5X35
and
ST3.5X35
Wall Anchors
40mm from top part of the countertop (such as faucet)
( ) 40mm
Install mounting bar
Take out the mounting bar and put level. Drill holes according to the hole spaces.
1304452-T01-B

-4-
STEP
2
Top Clip
Cabinet
Mounting Bar
Fix the clips and the cabinet
1. Put the cabinet on the mounting bar.
1.
2. Insert the clips into the two sides on cabinet top and mark with pencil. Release the clips and drill holes at marked positions.
2.
3. Fix the two clips and move to top. Put the cabinet onto the mounting bar and tighten the clips with screws.
3.
4. After completely tightening the clips, loosen the screws 5 to 7 times to avoid over tightening.
4. 5 7
1304452-T01-B

-5-
Adjust the door (only necessary if the door does not completely match the cabinet when it is closed).
()
STEP
3
STEP
4
Install accessories and side mirror as shown.
1. Fix side mirror bracket.
1.
2. Align the side mirror with the top and bottom of the cabinet. Clean the back of the mirror.
2.
3. Peel off the double-sided tape and press onto the side mirror for 30 seconds.
3. 30
Fix With Screw
(Pay Attention To Mounting Hole Position)
()
M4X9.5
M4X9.5
Depth Adjustment Side Adjustment
1304452-T01-B

-6-
STEP
6
STEP
5
Install glass shelf
1. Insert the snap-in pins into the side holes.
1.
2. Insert the glass shelf into the snap-in pins. as shown in
the illustration.
2.
A
B
Power line connection
Wire Input(three-core cable)
220V/50Hz
()
Fixture Outlet Wiring Color
Brown
Yellow&Green
BlueNeutral
Ground
Hot
1304452-T01-B

-7-
STEP
7
Line outlet of cabinet.
Line outlet for Cabinet
K-77218T-R K-77218T
40 40
1304452-T01-B