Konftel 300Wx User manual

SD memory card port
It is possible to record a call in progress and use the
Konftel 300Wx as a dictaphone.
Press the button to start and stop recording.
Recordings can be accessed via the menu.
LEDs
Flashing blue Incoming call
Steady blue light Call in progress
Flashing red Hold, microphone and
speaker turned off
Steady red light Mute, microphone turned off
Konftel 300Wx Quick Start Guide
ENGLISH
The Konftel 300Wx is a battery-
driven wireless conference phone
that can be connected to DECT
systems, mobile phones or PCs. It
can be connected to a Konftel DECT
base station or any GAP/CAT-iq-
compatible DECT system.
A user guide with detailed instruc-
tions about connectivity options and
features is available on our website:
www.konftel.com/300wx.
Signal strength DECT
Date
Time
Battery status
Fully charged
< 1 hr talk time
Display symbols Charging the battery
Charge the battery by placing
the Konftel 300Wx on the
charging stand or plug the
power cable into the Konftel
300Wx.
A fully-charged battery provides
up to 60 hours of talk time. The
Konftel 300Wx lets you know when
there is less than one hour of talk
time left.

NAVIGATE IN MENUS AND MAKE SETTINGS
Alphanumerical buttons
Hold down a button for 2 seconds to open the
phonebook
Increase volume
Decrease volume
Mute
Hold
Connectivity options
DESCRIPTION
Menu
Settings
Navigation in menus
Display of call list
No/end/back
Start/stop recording
OK
Yes/conrm choice
Conference
Automatic dialling of
conference groups
One press of this button
will always connect all
parties to a conference call
Navigation in menus
Display of call list
Answer/connect calls
During a call: Press to call
a new person
End call
On/off
The Konftel 300Wx
menu contains the
following options:
CALL LIST
PHONE BOOK
CONF GUIDE
RECORDING
SETTINGS
STATUS
Press .
Select the option you want from the menu using the arrow keys.
Press OK to conrm.
Cancel the setting or go back one level in the menu by pressing
.
Quit the menu by pressing again.
Note that after you have made changes to a setting, you must press
OK to activate the setting.

GETTING STARTED
USING A COMPUTER
Connect the Konftel 300Wx to a compu-
ter using the USB cable provided.
Check that Konftel 300Wx USB Audio is
set as the sound device in the computer’s
settings.
Making VoIP calls
Make the call (or answer an incoming
call) using the computer’s VoIP software,
for example a web conference software,
Microsoft Lync®or Skype®.
USING A MOBILE PHONE
Connect a mobile phone using an acces-
sory cable.
Press the key. Select MOBILE and
press OK to conrm.
Making mobile calls
Press to activate the Konftel 300Wx.
Connect the call with the mobile phone.
BASE STATION REGISTRATION
Put the base station in registration mode.
Select > SETTINGS > DECT >
REGISTER.
Select a base (1–4).
Enter the base station’s PIN code.
The default code is 0000 for the Konftel
DECT base station.
The conference telephone will now search for
a base station. The base station has to be in
registration mode. If registration was successful,
the word SUCCESS will appear in the display.
The conference phone is now ready to use
Mini USB port for
PC connection

www.konftel.com
ANSWERING AND MAKING
CALLS
Press to answer an incoming call.
Dial the number and press to make a
call.
Press an arrow key to open a call list
containing previously dialled numbers.
Call using .
Press and hold an alphanumeric button
for two seconds to call a contact in the
phonebook.
DURING A CALL
Adjust the speaker volume using the keys
and .
Press to turn off the microphone.
Press to put the call on hold.
Both the microphone and the speaker are
turned off and the call is on hold.
Press the same button again to recon-
nect the call.
CALLS
Note that different PBXs may require dif-
ferent signals. If you experience problems
making multi-party calls: Please refer to
the manual for information about how to
make necessary settings and to your tele-
phone administrator or service provider
for specic settings.
ADDING A PARTY TO A CALL
Press the button during the call.
Calls in progress are put on hold and a second
dialling tone is heard.
Dial the second participant’s number,
press and wait for an answer.
Press the button to connect all the
meeting participants.
THE CONFERENCE GUIDE
You can create groups of up to six people via
> CONF. GUIDE > ADD GROUP.
Press the button and choose a confe-
rence group. Press OK if you want to see
who is in the group and to make the
call.
Follow the instructions in the guide and
answer with OK or .
Calls in progress are put on hold when the next
participant calls.
When all participants have been called, they
are automatically connected for a conference
call.
MULTI-PARTY CALLS
110283 Rev 1A