Konica Minolta bizhub 501 User manual

1
For detail information，Please refer to the User Manual
Shortcut Manual
bizhub 501 / 421

2
1. Touch Panel
2. Main Power
3. Power
4. Mode Memory
5. Utility/Counter
6. Reset
7. Interrupt
8. Stop
9. Proof Copy
10. Start
11. Panel
12. “C”Clear
13. Keypad
14. Help
15. Enlarge Display
16. Accessibility
17. Power Save
18. Access
19. Brightness
20. User Box
21. Fax / Scan
22. Copy

3
Basic (I)
-- Density
Adjust Image Density Or Adjust
Background Density
Basic (II)
-- Paper
Change Bypass Tray Setting
1 Touch Basic, Touch Paper
2 Select Bypass Tray
3 Touch Change Tray
Settings
4 Select Paper Type
5 Input paper size
a Touch Standard Size
b Touch Custom Size
input (Length) X and
(width) Y，e.g. 90mm
please input 0900
(If stored paper size，
touch Store，then
choose Memory1 -5 )
6 Touch OK

4
7 Basic (III)
-- Zoom
Touch ZOOM
1 Select fixed zoom size
a Touch default zoom ratios
e.g.︰A3 A4 default zoom ratio is
0.707
b Touch
- + to change zoom ratio
2 Touch XY Zoom
Using the keypad，type in the desired zoom ratio then touch OK
Sort/Group
1. Touch Finishing
2. Touch Sort or Group
3. Touch Start
Offset
1. Touch Finishing
2. Offset touch Yes
3. Press Start
Sort
Group

5
(Optional Function)
Staple
1. Touch Finishing
2. At Staple select Corner or 2position
3. Touch position Setting
4. Press Start
Punch
1. Touch Finishing
2. At Staple select 2 Hole or 4 Hole
3. Touch position Setting
4. Press Start
Fold/Bind
1. Touch Finishing
2. At Fold/Bind select Yes
3. Touch Half-Fold Center Staple & Fold or Tri-Fold
Half-Fold
Center Staple & Fold

6
Basic (IV)
--Duplex/Combine
Select Combine
1. Touch 2 in 1 or
2. Touch 4 in 1/ 8 in 1
To reduce the size from 2 / 4
/ 8 sheets originals into 1
sheet of copy
Original ＞Copy
a 1-sided > 2-sided Single-sided Original to Double-sided Copy
b. 2-sided >1-sided Double-sided Original to Single-sided Copy
c. 2-sided >2-sided Double-sided Original to Double-sided Copy

7
Originals Setting
1. Touch Mixed Original automatically detect the documents size and automatically
choose paper tray
2. Touch Z-Folded Original (Optional Function)
3. Touch Binding Direction -- copy-binding
direction
4. Touch Original Direction –select original
direction
4. Touch Original Size -- select original size
Quality/Density
1. Select Original Type to choose
Text, Text/Photo, Photo, Map,
Dot Matrix Original or Copied
Paper
2. Touch Density –the print image
can be adjusted, each time [Lighter]
or [Darker] is touched, the density is
lightened or darkened by one level.
3. Touch Background Removal –
the density of the background color of the document can be adjusted, each time [Light] or
[Dark] is touched, the background density is lightened or darkened by one level.
4. Touch Text Enhancement –select the reproduction quality of text when copying
documents consisting of text that overlaps images such as illustrations or graphs
5. Touch Glossy –select this setting when copying images with a glossy finish

8
Application
- OHP Interleave
1. Touch Application
2. Touch Sheet /Cover /Chapter Insert
3. Touch OHP Interleave
4. Select inserting paper tray
5. Load OHP transparencies into the bypass
tray
6. Touch OK
7. Press Start

9
- Cover Mode
1. Touch Application
2. Touch Sheet /Cover /Chapter Insert
3. Touch Cover Mode
4. Select Front Cover or Back Cover
5. Touch Ok
6. Press Start
- Insert Sheet
1. Touch Application
2. Touch Sheet /Cover /Chapter Insert
3. Touch Insert Sheet
4. Touch Copy or Blank select inserted
pages are printed or not
5. Select the paper tray loaded with the paper for the insertion sheets
6. Touch Ok
7. Press Start

10
- Insert Image
1. Touch Application
2. Touch Sheet /Cover /Chapter Insert
3. Touch Insert Image
4. Select inserted image pages number
5. Touch Ok
6. Press Start
7. Final，Touch Finish then press Start
- Chapter (Duplex Only)
1. Touch Application
2. Touch Sheet /Cover /Chapter Insert
3. Touch Chapter
4. Select inserted image pages number
5. Touch OK then press Start