Konica Minolta Di1611 User manual

$I$I
___________________________________________________________________________
5SER-ANUAL4WAIN$RIVER

Contents
Di1611/Di2011 Twain Driver i
Contents
1 Setting Up PC Scanning
2 Connecting to the USB Port
3 Installing the TWAIN Driver
3.1 Installing the TWAIN Driver Using Plug and Play ......................3-1
Installing the TWAIN Driver Using Plug and
Play Under Windows XP ............................................................3-1
Installing the TWAIN Driver Using Plug and
Play Under Windows 2000 .........................................................3-3
Installing the TWAIN Driver Using Plug and
Play Under Windows Me/98 .......................................................3-4
4 How to Scan Document
4.1 Using the Automatic Document Feeder......................................4-1
4.2 Using the Original Glass ..............................................................4-2
5 Common Settings
5.1 Auto Options .................................................................................5-1
6 Error Message
6.1 Original Document Jam................................................................6-1
To clear a misfeed in the Automatic Document Feeder .............6-2
Communication Error..................................................................6-3
Scanner Busy .............................................................................6-3
Read Data Error .........................................................................6-4
Automatic Document Feeder No Paper......................................6-5
Other Machine Error...................................................................6-6

Contents
ii Di1611/Di2011 Twain Driver

Setting Up PC Scanning 1
Di1611/Di2011 Twain Driver 1-1
1 Setting Up PC Scanning
If the enclosed TWAIN Driver is installed on the computer, this copier can
be used for to scan documents to a PC.
The following software and hardware system environment is required for
PC scanning.
GOS: Windows 98, Windows Me, Windows 2000, or Windows XP
GTWAIN-compatible image-processing software (such as, Adobe Pho-
toshop)
GUSB V.1.1 (or later version)

1Setting Up PC Scanning
1-2 Di1611/Di2011 Twain Driver

Connecting to the USB Port 2
Di1611/Di2011 Twain Driver 2-1
2 Connecting to the USB Port

Important!
Be sure to use a shielded USB cable. Use of an unshielded cable may
result in radio interference.
1Make sure that the copier and the computer to be connected to the
copier are turned OFF.
2Connect one end of the USB cable to the USB port of the copier.
This completes the connection.

Note
USB1.1 is only supported on Windows 98, Windows Me, Windows
2000, and Windows XP.
Connect
Copier
PC

2Connecting to the USB Port
2-2 Di1611/Di2011 Twain Driver

Installing the TWAIN Driver 3
Di1611/Di2011 Twain Driver 3-1
3 Installing the TWAIN Driver
This section describes the procedure for installing both of the TWAIN driv-
er and GDI Diver. The TWAIN driver can be installed by using Plug and
Play.
3.1 Installing the TWAIN Driver Using Plug and Play
Installing the TWAIN Driver Using Plug and Play Under Windows XP
1With Windows running, insert the CD-ROM into your computer’s CD-
ROM drive.
2Turn on the copier.
3When the copier is ready, connect it to the computer with the USB cable.
The “Found New Hardware Wizard” dialog box appears.
4Select Install from a list or specific location [Advanced], and then
click [Next].
5Select Include this location in the search: under Search for the
best driver in these locations., and then click [Browse].
6Browse to “Driver\(language)\WinXP” on the CD-ROM, and then click
[OK].

Tip
Select the language you prefer. For example, if you prefer English,
browse to:
Driver\English\WinXP

3Installing the TWAIN Driver
3-2 Di1611/Di2011 Twain Driver
7Click [Next].
8The “Completing the Found New Hardware Wizard” dialog box ap-
pears.
HClick [Finish].
9The “Found New Hardware Wizard” dialog box appears again.
HRepeat steps 4 through 7.

Note
This completes the installation of the TWAIN driver.

Installing the TWAIN Driver 3
Di1611/Di2011 Twain Driver 3-3
Installing the TWAIN Driver Using Plug and Play Under Windows
2000
1With Windows running, insert the CD-ROM into your computer’s CD-
ROM drive.
2Turn on the copier.
3When the copier is ready, connect it to the computer with the USB ca-
ble.
The “Found New Hardware Wizard” dialog box appears.
4Select Search for a suitable driver for my device (recommended)
in the “Install Hardware Device Drivers” dialog box, and then click
[Next].
The “Locate Driver Files” dialog box appears.
5Select Specify a location, and click [Next].
6Click [Browse...] on the next dialog box, browse to
“Driver\(language)\Win2000” on the CD-ROM, and then click [OK].

Tip
Select the language you prefer. For example, if you prefer English,
browse to:
Driver\English\Win2000
7Click [OK], and follow the instructions that appear on the screen until
the “Completing the Found New Hardware Wizard” dialog box ap-
pears.
HClick [Finish].
8The “Found New Hardware Wizard” dialog box appears again.
HRepeat steps 4 through 7.

Note
This completes the installation of the TWAIN driver.

3Installing the TWAIN Driver
3-4 Di1611/Di2011 Twain Driver
Installing the TWAIN Driver Using Plug and Play Under Windows Me/
98
1With Windows running, insert the CD-ROM into your computer’s CD-
ROM drive.
2Turn on the copier.
3When the copier is ready, connect it to the computer with the USB ca-
ble.
The “Add New Hardware Wizard” dialog box appears.
4Click [Next], and then select Search for the best driver for your de-
vice (Recommended) on the next dialog box.
HClick [Next] again.
5Select [Specify a location], and then click [Browse…].
6Browse to “Driver\(language)\Win9x” on the CD-ROM, and then click
[OK].

Tip
Select the language you prefer. For example, if you prefer English,
browse to:
Driver\English\Win9x
7Click [Next], and then follow the instructions that appear on the screen
until you can click [Finish].
8The “Add New Hardware Wizard” dialog box appears again.
HRepeat steps 4 through 7.

Note
Repeat steps 4 through 7 until the installation is completely finished.
This completes the installation of the TWAIN driver.

How to Scan Document 4
Di1611/Di2011 Twain Driver 4-1
4 How to Scan Document
4.1 Using the Automatic Document Feeder
1Select the PC software program (Imaging, Photoshop, etc.). This pro-
cedure uses Microsoft Imaging as an example.
2Click [File].
3Click [Select Device...].
4Choose “Minolta Di****” from the dialog box, then click [OK].

Note
The name of the copier displayed will vary depending on the model
being used.
Minolta Di****
5Click [Acquire Image...], then adjust any settings necessary.
HSee “Common Settings” on page 5-1.
6Place the document face up
on the Automatic Document
Feeder (AF-12) or Duplexing
Document Feeder (AFR-19).

Note
In order to scan double-
sided documents, the
Duplexing Document Feeder AFR-19 must be connected to the
machine. (Di2011 only)
7Click [Scan] to begin scanning.
Model name of the copier

4How to Scan Document
4-2 Di1611/Di2011 Twain Driver
4.2 Using the Original Glass
1Select the PC software program (Imaging, Photoshop, etc.). This pro-
cedure uses Microsoft Imaging as an example.
2Click [File].
3Click [Select Device...].
4Choose “Minolta Di****” from the dialog box, then click [OK].

Note
The name of the copier displayed will vary depending on the model
being used.
Minolta Di****
5Click [Acquire Image...], then adjust any settings necessary.
HSee “Common Settings” on page 5-1.
6Place the document face
down on the Original Glass.
HAlign the document with
the scale marks across
the top and to the left of
the Original Glass.
7Click [Scan] to begin scan-
ning.
Model name of the copier

Common Settings 5
Di1611/Di2011 Twain Driver 5-1
5 Common Settings
5.1 Auto Options
1
2
3
4
5
8
9
6
7
No. Items Settings
1 Paper Size A3L, B4L, A4L, B5L, A5L, FLS L, A4C, B5C, A5C, Ledger L,
11x14L, Legal L, Letter L, Half Letter L, Letter C, Half Letter C,
8KL, 16KL, 16KC
See “Paper Size:” on page 5-2.
2 Scan Type B/W (default setting), Photo
See “Scan Type:” on page 5-2.
3 Resolution 150dpi ×150dpi, 300dpi ×300dpi (default setting),
600dpi ×600dpi
See “Resolution:” on page 5-2.
4 Duplex Scanning OFF (default setting), ON
See “Duplex Scanning:” on page 5-2.
5 Brightness -4 to 4
See “Brightness:” on page 5-2.
6 Help See the Help file.
7 About See version information.
8 Scan Scan an image.
9 Close Close scanner dialog.

5Common Settings
5-2 Di1611/Di2011 Twain Driver
Paper Size:
Select the paper size from the pull-down list to match the size of document
to be scanned.
Scan Type:
The Scan Type pull-down list contain two options.
GB/W: Suitable for most text documents.
GPhoto: Suitable for photographs.
Resolution:
The Resolution pull-down list contain three options that can be used for
different purposes.
G150dpi ×150dpi: Normal resolution for text documents containing
standard sized text.
G300dpi ×300dpi: Higher resolution for text documents containing small
characters or fine print, such as a newspaper article. This is default
setting.
G600dpi ×600dpi: Highest resolution for scanning photographs and oth-
er images.
Duplex Scanning:
Select OFF or ON from the pull-down list.

Note
“Duplex Scanning” is not displayed and cannot be selected when the
Duplexing Document Feeder is not connected to the machine. (Di2011
only)
Brightness:
This function is used to adjust the brightness of colors. The default set-
tings is 0.
Brightness can be set from -4 to 4.

Error Message 6
Di1611/Di2011 Twain Driver 6-1
6 Error Message
6.1 Original Document Jam
Message on the Control Panel:
Message on the PC screen:
Cause Remedy
• A paper jam occurred in the Automatic
Document Feeder or Duplexing Document
Feeder.
• All misfed paper was not removed from the
Automatic Document Feeder or Duplexing
Document Feeder.
• Open the Document Feeder Cover and
the Automatic Document Feeder or Du-
plexing Document Feeder, and then re-
move the misfed paper.
• The recovery procedure is the same as
that for “To clear a misfeed in the Auto-
matic Document Feeder” on page 6-2.
• After the paper jam has been cleared, the
memory percentage will return to its orig-
inal value.

6Error Message
6-2 Di1611/Di2011 Twain Driver
To clear a misfeed in the Automatic Document Feeder
1Remove the original docu-
ment from the Document
Feed Tray.
2Open the Document Feeder
Cover and gently remove the
misfed paper.
3Open the Automatic Docu-
ment Feeder and gently re-
move the misfed paper.
4Close the Document Feeder
Cover, then load the docu-
ment removed in step 1 into
the Automatic Document
Feeder again.

Error Message 6
Di1611/Di2011 Twain Driver 6-3
Communication Error
Message on the PC screen:
Scanner Busy
Message on the PC screen:
Cause Remedy
• The copier is not ready.
• PC or copier system crash during commu-
nication.
• USB cable does not connect properly dur-
ing communication.
1. Turn the copier OFF, then check if the
USB cable is connected properly or not.
2. After checking the USB cable carefully,
turn the copier ON again.
3. If you still cannot fix the problem, call
your service representative.
Cause Remedy
• If TWAIN scanning and copy jobs are being
performed at the same the time, the copier
may stop in the middle of scanning.
• Wait until Copy or all scanning is over.

6Error Message
6-4 Di1611/Di2011 Twain Driver
Read Data Error
Message on the PC screen:
Cause Remedy
• An error occurred while reading data from
the copier while scanning. 1. Turn the copier OFF, then check if the USB cable is connected properly or not.
2. After checking the USB cable carefully,
turn the copier ON again.
3. If you still cannot fix the problem, call
your service representative.