Kramer VS-211H2 User manual

USER MANUAL
MODEL:
VS-211H2
Automatic HDMI Standby Switcher
P/N: 2900-300581 Rev 1 www.kramerAV.com

VS-211H2 – Contents
i
Contents
1Introduction 1
2Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 2
2.3 Recycling Kramer Products 3
3Overview 4
3.1 Defining the VS-211H2 Automatic HDMI Standby Switcher 5
4Connecting the VS-211H2 6
4.1 Connecting the REMOTE Terminal Block Connector 7
4.2 Setting the VS-211H2 DIP-Switches and Operation 7
5Technical Specifications 9
Figures
Figure 1: VS-211H2 Automatic HDMI Standby Switcher 5
Figure 2: Connecting the VS-211H2 Automatic HDMI Standby Switcher 6
Figure 3: REMOTE Terminal Block Connector 7

VS-211H2 - Introduction
1
1
1 Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront video, audio, presentation, and broadcasting professionals
on a daily basis. In recent years, we have redesigned and upgraded most of our
line, making the best even better!
Our 1,000-plus different models now appear in 14 groups that are clearly defined by
function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;
GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:
Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:
Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11:
Sierra Video Products; GROUP 12: Digital Signage; GROUP 13: Audio; and
GROUP 14: Collaboration.
Congratulations on purchasing your Kramer VS-211H2 Automatic HDMI Standby
Switcher. This product, which incorporates HDMI™ technology, is ideal for:
Presentation systems in conference rooms, boardrooms, auditoriums, hotels
and churches, production studios, rental and staging

2
VS-211H2 - Getting Started
2 Getting Started
We recommend that you:
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
Review the contents of this user manual
Go to www.kramerav.com/downloads/VS-211H2 to check for up-to-date
user manuals, application programs, and to check if firmware upgrades are
available (where appropriate).
2.1 Achieving the Best Performance
To achieve the best performance:
Use only good quality connection cables (we recommend Kramer high-
performance, high-resolution cables) to avoid interference, deterioration in
signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)
Do not secure the cables in tight bundles or roll the slack into tight coils
Avoid interference from neighbouring electrical appliances that may adversely
influence signal quality
Position your VS-211H2 away from moisture, excessive sunlight and dust
This equipment is to be used only inside a building. It may only be
connected to other equipment that is installed inside a building.
2.2 Safety Instructions
Caution:
There are no operator serviceable parts inside the unit
Warning:
Use only the Kramer Electronics power supply that is
provided with the unit
Warning:
Disconnect the power and unplug the unit from the wall
before installing

VS-211H2 - Getting Started
3
3
2.3 Recycling Kramer Products
The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims
to reduce the amount of WEEE sent for disposal to landfill or incineration by
requiring it to be collected and recycled. To comply with the WEEE Directive,
Kramer Electronics has made arrangements with the European Advanced
Recycling Network (EARN) and will cover any costs of treatment, recycling and
recovery of waste Kramer Electronics branded equipment on arrival at the EARN
facility. For details of Kramer’s recycling arrangements in your particular country go
to our recycling pages at http://www.kramerelectronics.com/support/recycling/.

4
VS-211H2 - Overview
3 Overview
The VS−211H2is a high−performance automatic switcher for HDMI video signals.
Offering priority and last-connected switching options, it automatically switches
according to the selected switching scheme based on active video signal detection.
The VS-211H2 features:
Maximum data rate of 17.82Gbps (5.94Gbps per data channel)
Maximum resolution 4K@60 UHD (4:4:4)
HDTV compatible
HDCP 2.2 and HDMI 2.0 compliant
3D pass-though
HDMI support for Deep Color, x.v.Color™, Lip Sync, up to 7.1 Uncompressed
Audio Channels, CEC
Advanced auto switching based on video clock detection
Contact closure for remote manual switching that overrides auto switching
HDMI power on the output follows the input, (that is, there is no power on the
output when there is no active input)
EDID pass thru that passes EDID signals from display to source
DIP-switches for setting the switching mode
Compact DigiTOOLS® enclosure where 3 units can be rack mounted
side−by−side in a 1U rack space with the optional RK−3T rack adapter

VS-211H2 - Overview
5
5
3.1 Defining the VS-211H2 Automatic HDMI Standby
Switcher
This section defines the VS-211H2.
Figure 1: VS-211H2 Automatic HDMI Standby Switcher
#
Feature
Function
1
ACTIVE INPUT LEDs (1 & 2)
Each LED lights when each input is active,
both LEDs flash when no input is active
2
PRIORITY LED
Lights when DIP-switch 1 is set to PRIORITY
3
LAST CONNECTED LED
Lights when DIP-switch 1 is set to LAST CONN
4
ON LED
Light when power is supplied to the unit
5
INPUT 1 Connector
Connects to HDMI source 1
6
INPUT 2 Connector
Connects to HDMI source 2
7
OUTPUT Connector
Connects to the HDMI acceptor
8
LAST CONN/PRIORITY
DIP- Switch 1
Set DIP 1 up (OFF) to select the Last Connected input
Set DIP 1 down (ON) to select the Priority input determined by
DIP-switch 2
9
DEF 1/DEF 2
DIP-switch 2
Set DIP 2 up (OFF) to make input 1 the default input
Set DIP 2 down (ON) to make input 2 the default input
10
REMOTE Terminal Block
Connects to optional contact closure switches 1 & 2 for
manual switching
11
5V DC Connector
Connects to the 5V DC power supply to power the unit

6
VS-211H2 - Connecting the VS-211H2
4 Connecting the VS-211H2
Always switch off the power to each device before connecting it to
your VS-211H2. After connecting your VS-211H2, connect its power
and then switch on the power to each device.
To connect the VS-211H2, as illustrated in the example in Figure 2, do the
following:
1. Connect the INPUT 1 connector to HDMI source 1 (for example, a Blu-ray
player).
2. Connect the INPUT 2 connector to HDMI source 2 (for example, a laptop
computer graphics source 4K@60 UHD).
3. Connect the OUTPUT connector to an HDMI acceptor (for example, a
4K@60 UHD projector).
4. If manual switching is needed, connect contact closure (pushbutton)
switches to the REMOTE terminal block see Section 4.1.
Figure 2: Connecting the VS-211H2 Automatic HDMI Standby Switcher

VS-211H2 - Connecting the VS-211H2
7
7
4.1 Connecting the REMOTE Terminal Block Connector
Regardless of the default input switch setting, you can force the switching of the
active input by remote control. To do this, connect the appropriate REMOTE input
terminal block connector pins to a momentary contact closure switches
(pushbuttons) (see Figure 3).
To force input source 1: momentarily connect REMOTE IN1 to PIN G
(ground)
To force I input source 2: momentarily connect REMOTE IN2 to PIN G
(ground)
Do not connect both the REMOTE IN1 and the REMOTE IN2
to PIN G simultaneously
Figure 3: REMOTE Terminal Block Connector
Note: The contact closure setting remains in effect until the selected source device
is disconnected or the VS-211H2 is powered off. All automatic switching is
overridden.
4.2 Setting the VS-211H2 DIP-Switches and Operation
When active input sources are connected to IN 1 and IN 2, the VS-211H2
switches in accordance with the DIP-switch settings on the rear of the unit.