KUHN SR600 GII User manual

7N037CUS_B
Read carefully before starting the machine
OPERATOR'S MANUAL
Wheel Rake
C0001 >
SR600 GII
7N037CUS_B - English (USA) - 05-2018
*7N037CUS_B*

1. - Dear Owner
SR600 GII
1
7N037CUS_B
Wheel Rake
1. Dear Owner
Copyright 2018 KUHN
In buying a Kuhn machine you have chosen wisely. Into it have gone years of thought, research and
improvement. You will find, as have thousands of owners all over the world, that you have the best that
engineering skill and actual field testing can produce. You have purchased a dependable machine, but only
through proper care and operation can you expect to receive the performance and long service built into it.
This manual contains all the necessary information for you to receive full efficiency from your machine. The
performance you get from this machine is largely dependent on how well you read and understand this
manual and apply this knowledge. Please DO NOT ASSUME YOU KNOW HOW TO OPERATE AND
MAINTAIN YOUR MACHINE before reading this manual carefully. KEEP THIS MANUAL AVAILABLE FOR
REFERENCE. Pass it on to the next owner if you re-sell the machine.
Your KUHN dealer can offer a complete line of genuine KUHN service parts. These parts are manufactured
and carefully inspected in the same factory that builds the machine to assure high quality and accurate
fitting of any necessary replacements.
About improvements
We are continually striving to improve our products. We therefore reserve the right to make improvements
or changes when it becomes practical to do so, without incurring any obligations to make changes or
additions to the equipment sold previously.
Wearing parts
Wearing parts fitted on our machines have been tested in very different situations to optimize their service
life. Nevertheless, the service life depends highlyon the conditions of use (products to handle, soil, weather
conditions, etc...).
Designated use of the machine
The SpeedRake® Wheel Rake must only be used for the work for which it has been designed: raking on
the ground and forming windrows of pre-mowed fodder and straw.

SR600 GII
22. - Contents
7N037CUS_B
Wheel Rake
2. Contents
1. Dear Owner .....................................................................................................................1
2. Contents..........................................................................................................................2
3. Identification of the machine.........................................................................................4
3.1 Front view ........................................................................................................................................ 4
3.2 Rear view......................................................................................................................................... 4
3.3 Model identification plate .................................................................................................................5
3.4 Optional equipment.......................................................................................................................... 5
4. Safety...............................................................................................................................6
4.1 Description of symbols used in this document.................................................................................6
4.2 Safety instructions ...........................................................................................................................7
4.3 Location and description of safety decals on the machine ............................................................ 15
4.4 Road safety equipment and recommendations ............................................................................. 18
4.4.1 Lights................................................................................................................................19
4.4.2 Transport lock...................................................................................................................22
5. Machine specifications................................................................................................23
5.1 Description and glossary ............................................................................................................... 23
5.2 Technical specifications ................................................................................................................. 24
6. Putting into service......................................................................................................25
6.1 Coupling and uncoupling ............................................................................................................... 25
6.1.1 Machine requirements......................................................................................................25
6.1.2 Drawbar height adjustment...............................................................................................25
6.1.3 Coupling the machine.......................................................................................................26
6.1.4 Jack storage.....................................................................................................................27
6.1.5 Safety chain...................................................................................................................... 28
6.1.6 Hydraulic connection ........................................................................................................29
6.1.7 Uncoupling the machine...................................................................................................30
7. Instructions for transport ............................................................................................31
7.1 Place the machine in transport position.........................................................................................31
7.2 Conformity with the road regulations ............................................................................................. 32

2. - Contents
SR600 GII
3
7N037CUS_B
Wheel Rake
8. Instructions for work................................................................................................... 33
8.1 Place the machine in working position .......................................................................................... 33
8.2 Setting windrow width.................................................................................................................... 34
8.3 Changing the working width........................................................................................................... 35
8.4 Adjusting front or rear rake wheels................................................................................................ 36
8.5 Adjusting transport wheel angle .................................................................................................... 37
8.5.1 Measure wheel angle....................................................................................................... 37
8.5.2 Verify tie rod length........................................................................................................... 38
8.5.3 Adjust tie rod length.......................................................................................................... 38
8.5.4 Final adjustments............................................................................................................. 39
8.6 Windguard..................................................................................................................................... 39
8.7 Adjusting rake wheel ground pressure .......................................................................................... 40
8.8 Adjusting hydraulic hose length..................................................................................................... 41
8.9 Adjusting caster wheel rotation...................................................................................................... 41
8.10 Optional one side raking (windrow turning)................................................................................... 42
9. Optional equipment..................................................................................................... 43
9.1 Mid-mount caster wheels............................................................................................................... 43
9.2 Center splitter wheels.................................................................................................................... 44
9.2.1 Locking center splitter wheels in the transport position.................................................... 45
9.3 Wheel extension kit ....................................................................................................................... 45
9.4 Hitch extension.............................................................................................................................. 46
9.5 One side raking ............................................................................................................................. 46
9.6 Restrictor adapter.......................................................................................................................... 46
9.7 Safety chain................................................................................................................................... 47
9.8 Ball hitch........................................................................................................................................ 47
9.9 Spade hitch.................................................................................................................................... 47
10. Maintenance and storage............................................................................................ 48
10.1 Lubrication..................................................................................................................................... 48
10.2 Maintenance.................................................................................................................................. 50
10.3 Storage .......................................................................................................................................... 52
11. Limited Warranty.......................................................................................................... 53