Kwikset 62842/01 User manual

Additional tools
(if needed)
wood block
Parts in the boxRequired tools
Latch ScrewsStrikes
Keys Deadbolt
SmartKey® tool
(SmartKey locks only)
A
A
A
A
A
B
C
BCDE F G
H
J
M
NP
Q
RS T
Hold the latch in front of the door hole, with
the latch case lush against the door edge. latch case
If the D-shaped hole is centered
in the door hole, no adjustment is
required. Proceed to step 4.
If the D-shaped hole is NOT centered, adjust
latch. See “Latch Adjustment” (step 3C).
Latch Adjustment
(only if needed)
180°
Rotate the front of the
latch to extend it.
Use a screwdriver to
retract the latch bolt.
Install
drive-in
collar.
Extend the
latch bolt.
D / E
P (2x)
Install backplate.
Install
faceplate.
centered
not centered
Make sure the curve is on
the bottom of the latch.
Make sure the curve is on
the bottom of the latch.
D-shaped hole
*Call Kwikset to order
a service kit for 21/4"
(57 mm) thick doors.
23/8" (60 mm)
or
23/4" (70 mm)
13/8"–21/4"*
35 mm–57 mm*
21/8"
54 mm
1"
25 mm
Door edge NOT
chiseled
Door edge chiseled
Instructions continue on reverse
23/8" (60 mm)
23/4" (70 mm)
Backset
Centerline
13/8" (35 mm)
13/4" (44 mm) 21/4" (57 mm)
Edge of the door
Fold
Drilling TemplateTemplate is only needed if a new hole must be drilled in the door.
Face of the door
180°
Use a screwdriver to extend the latch bolt.
Make sure the curve is on
the bottom of the latch.
A
B
C
o
wood block
Installation Guide
62842 / 01
258
Prepare door and check dimensions
1
Extend latch bolt
2
Adjust the backset of the latch (if needed)
3
Install latch
4

Measure the thickness of your door to determine the required mounting screws for step 7.
or or
o
Actual size Actual size
Call Kwikset to order a service
kit for 21/4" (57 mm)
thick doors. Use the screws
provided in the kit.
Make sure turnpiece is vertical.
torque blade
torque blade
latch cam
turnpiece
interior
exterior
J (2x)
M (2x)
F / G
F / G
N / P
(2x)
S
S
S
T
T
H (2x)
Make sure hole in
door frame is drilled
a minimum of 1"
(25 mm) deep.
Mounting plate should be
pre-installed on interior.
If removed, re-install.
Make sure latch bolt is fully extended.
Support deadbolt
interior while
installing exterior.
WARNING: This Manufacturer advises that no lock can provide complete security by itself. This lock may be
defeated by forcible or technical means, or evaded by entry elsewhere on the property. No lock can substitute
for caution, awareness of your environment, and common sense. Builder’s hardware is available in multiple
performance grades to suit the application. In order to enhance security and reduce risk, you should consult a
qualiied locksmith or other security professional.
13/8"
35 mm
13/4"
44 mm
21/4"
57 mm
Use screws from step 5.
Keep parallel.
Note: The longer screws, M, (3" / 76 mm) must
be used to maintain highest security.
Longer screws (M)
install closest to jamb.
Curve points up.
Troubleshooting
curve on bottom
If the screws are diicult to tighten, make
sure the latch is installed correctly.
A
A
B
B
C
C
Determine required mounting screws
5
Install deadbolt INTERIOR before exterior
6
Install deadbolt exterior
7
Install strike on door frame
8
Rely on premium home doors & windows by Kwikset if you’re looking for quality and efficiency.