KYLAND Technology KIEN3016M User manual

KIEN3016M/3024M Industrial Ethernet
Switch User’s Manual
KYLAND Telecom Technology Co., Ltd.

KIEN3016M/3024M Industrial Ethernet Switch
User’s Manual
Copyright © 2006 KYLAND Telecom Technology CO., LTD.
All rights reserved.
No part of this documentation may be excerpted, reproduced, translated, annotated or
duplicated, in any form or by any means without the prior written permission of KYLAND
Corporation.
Publisher: KYLAND Telecom Technology CO., LTD
Address: 5/F, Office Building, Transport Center, East of Xisanqi Bridge
Haidian District, Beijing, China
Website: http://www.kyland.cn
Postcode: 100096
Tel: [phone]
Fax: [phone]
E-mail：[e-mail]
Version: V1, Nov. 2006
No.: e3c01061101

Preface
KIEN3016M/3024M is a high-performance managed industrial Ethernet switch
specially designed by KYLAND Telecom Technology CO., LTD. for industrial
applications including star, tree and chain topology network. Its high-performance
switch engine, solid and closed case design, high-efficient ribbed shape case heat
dispersion surface without fans, overcurrent, overvoltage and EMC protection at power
input side, and excellent EMC protection of RJ45 port allows KIEN3016M/3024M
applicable in harsh and dangerous industrial environments. Meanwhile, it is suitable for
the broadband network for building automation.
The User’s Manual for KIEN3016M/3024M Industrial Ethernet Switch mainly
introduces the information on technical principles, performance indexes, installation
and commissioning, network management etc. to provide users with references in
startup, expansion and routine maintenance. It is a practical teaching material that can
be used by users in trainings and helps the relevant technical personnel to increase their
knowledge and understanding of industrial Ethernet switch.
This manual mainly includes the following contents:
Chapter 1: Overview & System Features
Chapter 2: Performance & Service Functions
Chapter 3: Hardware of KIEN3016M
Chapter 4: Hardware of KIEN3024M
Chapter 5: Installations
Chapter 6: Testing Method
Chapter 7: Networking & System Configurations
Chapter 8: WEB Management Software
Chapter 9: Console Port Management
Appendix ATwisted pair and pin distribution rules
Appendix B Cable types and specifications
Appendix C Glossary
Statement: as product and technology upgrades and improves constantly, the
contents of this document may not completely accord with the actual
product. For product upgrading information, please access our company’s
website or directly contact with our company’s business representative.

Safety Notice
This product offers reliable performances as long as it is used within the designed
scope. Artificial damage or destruction of the equipment should be avoided.
Carefully read this manual and well preserve this manual for future reference;
Do not place the equipments near water sources or damp places;
Do not place anything on power cable which should be placed in unreachable
places;
Do not tie or wrap the cable to prevent fire.
Power connectors and connectors for other equipments should be firmly
interconnected and frequently checked.
In the following cases, please immediately disconnect the power supply and
contact with our company:
1. Water gets into the equipments;
2. Equipment damage or shell breakage;
3. Abnormal operation conditions of equipment or the demonstrated
performances have changed;
4. The equipment emits odor, smoke or noise.
Please keep optical fiber plugs and sockets clean. During operation of equipments,
do not stare directly into the cross section of optical fiber;
Please keep the equipment clean; if necessary, wipe the equipment with soft
cotton cloth;
Do not repair the equipment by yourself, unless it is clearly specified in the
manual.

Warning Marks:
This manual uses two kinds of noticeable warning signs to arouse special attention
of users during operation. The implications of these signs are as follows:
Warning: pay special attention to the notes behind the mark,
improper operation will result in serious damage of the switch or
injury of operation personnel.
Caution, attention, warning, danger: remind the positions
requiring attention during operation.

-i-
CONTENTS
Chapter One Overview................................................................................................................................. 1
1.1 Product Overview................................................................................................................................ 1
1.2 System Features .................................................................................................................................. 2
1.3 Packing list and unpacking check .......................................................................................................2
ChapterTwo Performance Specifications...................................................................................................5
2.1 System Specifications .........................................................................................................................5
2.2 Service Interface.................................................................................................................................. 7
2.3 Service Functions................................................................................................................................ 7
ChapterThree KIEN3016M Hardware Structure.....................................................................................9
3.1 System Structure ................................................................................................................................. 9
3.2 Switch Structure................................................................................................................................ 10
3.2.1 Chassis.................................................................................................................................... 10
3.2.2 Front Panel.............................................................................................................................. 10
3.2.3 Rear Panel............................................................................................................................... 11
Chapter Four KIEN3024M Hardware Structure.....................................................................................15
4.1 System Structure ............................................................................................................................... 15
4.2 Switch Structure................................................................................................................................ 15
4.2.1 Chassis.................................................................................................................................... 15
4.2.2 Front Panel.............................................................................................................................. 16
4.2.3 Rear Panel............................................................................................................................... 17
Chapter Five Hardware Mounting............................................................................................................ 21
5.1 Installation Requirements.................................................................................................................. 21
5.2 Mounting Main Unit ......................................................................................................................... 21
5.3 Cable Connection..............................................................................................................................22
5.4 Optical fiber connection.................................................................................................................... 23
5.5 Cable Wiring ..................................................................................................................................... 23
Chapter Six Testing Method.......................................................................................................................25
6.1 Self-Check......................................................................................................................................... 25

-ii-
6.2 Testing Ethernet Ports........................................................................................................................25
6.3 Testing Fiber Ports.............................................................................................................................26
Chapter Seven Networking Mode and System Configuration.................................................................27
7.1 KIEN3016M Networking ..................................................................................................................27
7.2 KIEN3024M Networking ..................................................................................................................29
7.3 System Configurations.......................................................................................................................30
Chapter Eight Web Management Software...............................................................................................33
8.1 Software Login ..................................................................................................................................33
8.2 Main Page..........................................................................................................................................33
8.3 Port Status..........................................................................................................................................34
8.4 Port Configuration .............................................................................................................................34
8.5 Trunk Configuration ..........................................................................................................................35
8.6 VLAN Configuration.........................................................................................................................35
8.6.1 Port-based VLAN Configuration.............................................................................................36
8.6.2 802.1Q-based VLAN Configuration .......................................................................................36
8.7 Port Monitoring Configuration..........................................................................................................37
8.8 Port Rate Configuration.....................................................................................................................38
8.9 QOS...................................................................................................................................................39
8.10ACL.................................................................................................................................................40
8.10.1 Ipv4 ACLConfiguration........................................................................................................40
8.10.2 Non-Ipv4 ACL Configuration ...............................................................................................41
8.11 Other Configurations.......................................................................................................................42
8.11.1Advanced Configuration .......................................................................................................42
8.11.2 PASSWORD Setup ...............................................................................................................42
8.11.3 IGMP-snooping Enable.........................................................................................................43
8.11.4 IPAddress Configuration......................................................................................................43
8.11.5 Update Configuration............................................................................................................44
Chapter Nine Console Management ..........................................................................................................45
9.1 Functional Key and Command ..........................................................................................................45
9.1.1 Functional Key........................................................................................................................45

-iii-
9.1.2 Console Command.................................................................................................................. 45
9.2 Serial Port Console Interface............................................................................................................. 46
9.2.1 Serial Port Console Main Page ............................................................................................... 46
9.2.2 Port Status............................................................................................................................... 47
9.2.3 Port Configuration .................................................................................................................. 47
9.2.4 Trunk Configuration ............................................................................................................... 48
9.2.5 VLAN Configuration.............................................................................................................. 48
9.2.6 Port Monitoring Configuration ............................................................................................... 51
9.2.7 Bandwidth Control.................................................................................................................. 52
9.2.8 QoS Configuration..................................................................................................................53
9.2.9 Port Counters ..........................................................................................................................53
9.2.10 Access Control List ..............................................................................................................54
9.2.11 Misc Operation..................................................................................................................... 58
AppendixATwisted-pair and Pin Distribution........................................................................................63
Appendix B Cable Type and Specifications...........................................................................................67
Appendix C Glossary.................................................................................................................................. 68

-1-
Chapter One Overview
1.1 Product Overview
KIEN3016M/3024M is a high-performance managed industrial Ethernet switch
specially designed by KYLAND Telecom Technology CO., LTD. for industrial
applications including star, tree and chain topology network. Its high-performance
switch engine, solid and closed case design, high-efficient ribbed shape case heat
dispersion surface without fans, overcurrent, overvoltage and EMC protection at power
input side, and excellent EMC protection of RJ45 port allows KIEN3016M/3024M
applicable in harsh and dangerous industrial environments. Meanwhile, it is suitable for
the broadband network for building automation
KIEN3016M offers 16 RJ45 ports of 10Base-T/100Base-TX in its real panel. Each
RJ45 port is adaptive to 10Base-T or 100Base-TX and half-duplex or full-duplex, and
can be connected automatically in MDI/MDI-X way. In the front panel, there are four
slots for fiber ports and can offer 0 to 4 pairs of fiber ports 100Base-FX of full-duplex
with SM or MM optical fiber cables. The switches can be connected uplink via these
fiber ports
KIEN3024M offers 24 RJ45 ports of 10Base-T/100Base-TX in its real panel. Each
RJ45 port is adaptive to 10Base-T or 100Base-TX and half-duplex or full-duplex, and
can be connected automatically in MDI/MDI-X way. In the front panel, there are two
slots for fiber ports and can offer 0 to 2 pairs of fiber ports 100Base-FX of full-duplex
with SM or MM optical fiber cables. The switches can be connected uplink via these
fiber ports
KIEN3016M and KIEN3024M also offer a console interface in their rear panel, by
which you can manage and configure the switch via hyper terminal. You can enter into
WEB interface of the switch from any RJ45 port and manage the switch.

KIEN3016M/3024M Industrial Ethernet Switch User’s Manual
-2-
1.2 System Features
1. High Performance Industrial Ethernet Switch
Adaptive to Base-T/100Base-TX, half-duplex or full-duplex, auto MDI/MDI-X
connection.
Full-duplex fiber ports of 100Base-FX, single mode or multimode.
Broadcasting storm protection.
Conform to IEEE802.3/802.U/802.3X
Transparent transmission of VLAN tag packets.
Powerful management realizes VLAN, IGMP-Snooping、TRUNK, port mirroring
etc.
Hyper terminal interface offers convenience for project field.
２. Optional Industrial Power Design
Industrial AC power supply (220V)
Industrial DC power supply DC+24V、DC-48V）.
EMC protection and protection against over-current, over-voltage.
３.Rugged Design
Ribbed case without fan, operation at -35℃~+75℃.
IP40 protection class
1.3 Packing list and unpacking check
１.Packing list
The packing case includes the following items:
KIEN3016M or KIEN3024M 1
3-core DC power terminal 1
User’s Manual 1
Customer Service Guideline 1

Chapter One Overview
-3-
２.Unpacking check
Before opening the case, place it stably, pay attention to the direction of the packing
case, and ensure its right side is facing upward, so as to prevent switch from falling
apart after opening the case. If a hard object is used to unclench the case, do not
overly extend the hard object into the case to avoid damage of the equipments
inside the case.
After opening the case, check the amount of equipments (including main unit of
parts of equipment, user’s manual, customer service guideline) according to the
packing list, and check the appearance quality of switch.
Warning:
For the built-in precise parts of equipments, please handle with care and avoid
strenuous vibration to avoid affecting the performances of equipments.

-5-
Chapter Two Performance Specifications
2.1 System Specifications
The system specifications of KIEN3016M industrial Ethernet switch is shown as table 2-1.
Table 2-1 System Specifications
Specs Description
Management Port 1 x RS232，RJ45 socket
16 10Base-T/100Base-TX
Port Quantity & Type 0~4 x 100Base-FX-SM/MM
System Performance
Standard: IEEE802.3、IEEE 802.3x、IEEE 802.3u
Storage and forward rate: 148810 pps
Maximum filtering rate: 148810 pps
Switch method: Store and forward
System switching bandwidth: 8.8G
EMC: EN55022; EN50082-2
Ethernet Port
Physical interface:RJ-45(shielded)
RJ-45: 10/100Base-T/TX, auto-negotiatable
Standard: IEEE802.3
Transmission Distance: <100m
Fiber Port
Optical Power >-13dbm(SM) >-20dbm(MM)
Optical Sensitivity：<-28dbm(SM) <-35dbm(MM)
Wavelength：1310nm(SM) 1550nm(SM) 1310 nm(MM)
Transmission Distance：20～80Km(SM) <2Km(MM)
Connector：SC/FC
Rate：125Mbps
Power Requirement
Power Supply：AC 220V（AC 200V～240V，50Hz～60Hz）
DC24V（DC 18V～36V）DC-48V (DC -36V～-72V)
Consumption：<15W
Over-current protection: Built-in
Mechanical Parameters
Dimension（HWD）: 44 ㎜482.6 ㎜245 ㎜
Installation: 19’ Rack
Heat removal: Ribbed aluminum casing without fan
Outlet: rear
Protection class: IP40
Weight: 4 ㎏
Ambient Conditions
Operation temperature:-35℃～75℃
Storage temperature: -45℃～85℃
Humidity: 10%～95% (non-condensing)

KIEN3016M/3024M Industrial Ethernet Switch User’s Manual
-6-
The system specifications of KIEN3024M industrial Ethernet switch is shown as table 2-2:
Table 2-2 System Specifications
Specs Description
Management Port 1 x RS232，RJ45 socket
24 10Base-T/100Base-TX
Port Quantity & Type 0~2 x 100Base-FX-SM/MM
System Performance
Standard: IEEE802.3、IEEE 802.3x、IEEE 802.3u
Storage and forward rate: 148810 pps
Maximum filtering rate: 148810 pps
Switch method: Store and forward
System switching bandwidth: 8.8G
EMC: EN55022; EN50082-2
Ethernet Port
Physical interface: RJ-45(shielded)
RJ-45: 10/100Base-T/TX, auto-negotiatable
Standard: IEEE802.3
Transmission Distance: <100m
Fiber Port
Optical Power >-13dbm(SM) >-20dbm(MM)
Optical Sensitivity：<-28dbm(SM) <-35dbm(MM)
Wavelength：1310nm(SM) 1550nm(SM) 1310 nm(MM)
Transmission Distance：20～80Km(SM) <2Km(MM)
Connector：SC/FC
Rate：125Mbps
Power Requirement
Power Supply：AC 220V（AC 200V～240V，50Hz～60Hz）
DC24V（DC 18V～36V）
DC-48V (DC -36V～-72V)
Consumption：<15W
Over-current protection: Built-in
Mechanical Parameters
Dimension（HWD）: 44 ㎜482.6 ㎜245 ㎜
Installation: 19’ Rack
Heat removal: Ribbed aluminum casing without fan
Outlet: rear
Protection class: IP40
Weight: 4 ㎏
Ambient Conditions
Operation temperature:-35℃～75℃
Storage temperature: -45℃～85℃
Humidity: 10%～95% (non-condensing)

Chapter Two Performance Specifications
-7-
2.2 Service Interface
1．KIEN3016M offers 16 RJ45 ports of 10Base-T/100Base-TX, and KIEN3024M
offers 24 RJ45 ports of 10Base-T/100Base-TX. Each RJ45 port is adaptive.
KIEN3016M also offers 0 to 4 fiber ports of 100Base-FX and KIEN3024M offers
0 to 2 fiber ports of 100Base-FX. The throughout of each fiber port is max
100Mbps.
2．Comply with IEEE802.3/802.U/802.3X.
3．RJ45 port is adaptive to half-duplex or full-duplex mode. The fiber port is
enforced to full-duplex mode.
4．RJ45 port is adaptive to 10/100M and supports for auto MDI/MDI-X connection.
Transmission distance is less than 100m.
5．Indicator of RJ45：yellow for rate, ON for 100M, OFF for 10M
Green for link status, ON for active connection, BLINK for active network, OFF
for no connection.
2.3 Service Functions
offer such service functions as following：
1．LED Indicator
The LEDs of the front panel indicate the port status correctly including transmission
rate, link status and system status.
2．Layer-2 Switching
Switches work in two ways: Cut-Through and Store-and-Forward. In Cut-Through, a
data packet is immediately relayed further after detecting the target address; in
Store-and-Forward, a data packet is first read-in completely and checked for errors
before the switch relays the same. KIEN3016M and KIEN3024M employ
Store-and-Forward that is a switching mode widely used.
3．VLAN
The network can be divided into several VLANs, based on port, through which
the users in one VLAN can communicate each other. The VLAN of
KIEN3016M/3024M conform to IEEE802.1Q and can realize the communication

KIEN3016M/3024M Industrial Ethernet Switch User’s Manual
-8-
within one VLAN of different switches. It supports up to sixteen VLANs. You
can divide the VLANs through console or WEB management easily.
4．PortAggregation(TRUNK)
Ethernet TRUNK can bind up to 8 physical Ethernet ports. The bound
Eth-trunk port is the same as normal Ethernet port and supports for all
the service functions. You can configure the service functions on the
Eth-trunk port, but note to configure the OoS in the physical ports.
5．Multicasting（IGMP）
IGMP means Internet Group Multicast Protocol. KIEN3016M/KIEN3024M
supports IGMP surveillance and inquiry.
6．Configuring working mode of port
KIEN3016M/3024M is able to set the working mode of all ports through
management: full/half duplex, auto-sensing, enforced full/half duplex,
enforced 10M/100M。
7．Port Mirroring
The switch can mirror the data of one port to another port to realize the real
communication of data.

-9-
Chapter Three KIEN3016M Hardware
Structure
3.1 System Structure
KIEN3016M hardware is structured as Figure3-1:
Swi t chi ng
Net work
Control l er
PortA Ethernet
Port 1-16
PortB PortC PortD
Power
Power
Port EMC
protections
Figure 3-1 Hardware Structure
System hardware mainly consist the following parts:
1．Switching network controller employs ASIC chip technology, offering
layer-2 wire-speed transfer of data packets.
2．Integrated module of transmitting and receiving.
3．Industrial isolated power supply with protection of over-current,
over-voltage and EMC.
4．EMC protection for all Ethernet ports.

KIEN3016M/3024M Industrial Ethernet Switch User’s Manual
-10-
3.2 Switch Structure
3.2.1 Chassis
KIEN3016M is a standard 19’ chassis with up to IP40 protection class. The chassis is
made of aluminum with ribbed case as one part of the heat removal system. The chassis
of KIEN3016M is shown in Figure 3-2:
Dimensions：44 ㎜×482.6 ㎜×245 ㎜（H×W×D）:
440
482.6
245 1 53 97 1311
2 4 6 10 12 148
15
16
DC POWER 44
AC220V POWER
OFF
ON
CONSOLE
AR AT BR BT CR CT DR DT
Figure 3-2 Chassis of KIEN3016M
3.2.2 Front Panel
The front panel of KIEN3016M is shown in Figure 3-3：
KIEN3016Industrial Ethernet Switch
系统运行指示灯 光口指示灯 电口指示灯
DCA BRUN
DPX
LINK 1 2 53 4 6 87 13129 1011 141516 LINK/ACT
10M/100M
Figure 3-3 Front Panel
Indicators show the status of system operation and ports to find and correct faults.
The Table 3-1 shows the meanings of these LED indicators in the front panel.
Table 3-1 LED Indicator Description
LED Conditions Status
System Status LED
RUN ON Running normally
Fiber Port Status LED
Fiber Port A-D
ON full-duplex connection
DPX OFF half-duplex connection
System Running Status
Indication LED Port Eth ernet Indication LED Indication P ort LED