KYLAND Technology SICOM3008PN Assembly instructions

SICOM3008PN Industrial Ethernet Switch
Hardware Installation Manual
Publication Data: Dec. 2016
Version: V1.0
No.:

SICOM3008PN Industrial Ethernet Switch
Hardware Installation Manual
Disclaimer: Kyland Technology Co., Ltd. tries to keep the content of this manual as
accurate and as updated as possible. This document is not guaranteed to be error-free, and
we reserve the right to amend it without notice to users.
All rights reserved.
No part of this documentation may be excerpted, reproduced, translated, annotated or
duplicated, in any form or by any means without the prior written permission of KYLAND
Corporation.
Copyright © 2016 Kyland Technology Co., Ltd.

Notice for Safety Operation
The product performs reliably as long as it is used according to the guidance. Artificial
damage or destruction of the device should be avoided. Before using the device, read this
notice carefully for personal and equipment safety. Please keep the manual for further
reference. Kyland is not liable to any personal or equipment damage caused by violation of
this notice.
Do not place the device near water sources or damp areas. Keep the ambient relative
humidity within the range from 5% to 95% (non-condensing).
Do not place the device in an environment with high magnetic field, strong shock, or high
temperature. Keep the working and storage temperatures within the allowed range.
Install and place the device securely and firmly.
Please keep the device clean; if necessary, wipe it with a soft cotton cloth.
Do not place any irrelevant materials on the device or cables. Ensure adequate heat
dissipation and tidy cable layout without knots.
Wear antistatic gloves or take other protective measures when operating the device.
Avoid any exposed metal wires because they may be oxidized or electrified.
Install the device in accordance with related national and local regulations.
Before power-on, make sure the power supply is within the allowed range of the device.
High voltage may damage the device.
Power connectors and other connectors should be firmly interconnected.
Do not plug in or out the power supply with wet hands. When the device is powered on,
do not touch the device or any parts with wet hands.
Before operating a device connected to a power cable, remove all jewelry (such as rings,
bracelets, watches, and necklaces) or any other metal objects, because they may cause
electric shock or burns.
Do not operate the device or connect or disconnect cables during an electrical storm.
Use compatible connectors and cables. If you are not sure, contact our sales or
technical support personnel for confirmation.

Do not disassemble the device by yourself. When an anomaly occurs, contact our sales
or technical support personnel.
If any part is lost, contact our sales or technical support personnel to purchase the
substitute. Do not purchase parts from other channels.
Dispose of the device in accordance with relevant national provisions, preventing
environmental pollution.
In the following cases, please immediately shut down your power supply and contact your
Kyland representative:
Water gets into the equipment.
Equipment damage or shell damage.
Equipment operation or performance has abnormally changed.
The equipment emits odor, smoke or abnormal noise.

I
CONTENTS
1 Product Overview.......................................................................................................... 1
2 Structure and Interface.................................................................................................. 3
2.1 Front Panel................................................................................................................ 3
2.2 Top Panel................................................................................................................... 5
3 Mounting........................................................................................................................ 6
3.1 Dimension Drawing.................................................................................................... 6
3.2 Mounting Modes and Steps....................................................................................... 7
3.2.1 Mounting............................................................................................................. 8
3.2.2 Wall Mounting..................................................................................................... 8
4 Connection...................................................................................................................10
4.1 10/100/1000Base-T(X) Ethernet Port........................................................................10
4.2 1000Base-X, 10/100/1000Base-T(X) SFP slot..........................................................11
4.2.1 Gigabit SFP Optical Module...............................................................................12
4.2.2 Gigabit SFP Electrical Module...........................................................................13
4.3 Console Port.............................................................................................................13
4.4 Grounding/ Power Terminal Block/ Alarm Terminal Block..........................................15
4.5 SYSTEM RESET......................................................................................................16
5 LEDs.............................................................................................................................17
6 Switch Access ..............................................................................................................18
6.1 Access through Console Port ...................................................................................18
6.2 Access through Telnet...............................................................................................20
6.3 Access through Web.................................................................................................21
7 Basic Features and Specifications ...............................................................................22

Product Overview
1
1 Product Overview
The profinet swtich SICOM3008PN mainly applied in industrial automation related industries.
SICOM3008PN are applicable to harsh and hazardous industrial environments due to its
high-performance switching engine, solid closed housing, fanless but heat
dissipation-capable single-rib shaped chassis, overcurrent, overvoltage, and EMC protection
for power input, and EMC protection of RJ45 ports. The redundant network and power input
support guarantees the reliable operation of the system.
SICOM3008PN support typical profinet network function include GSD file, MRP, which fulfill
the profinet conformance class B and we have certified by PI (Profibus & Profinet
Internationl). The device can be managed through CLI, Telnet, Web.
The series switches support DIN rail and panel mounting. For details, see the following
table.
Table 1 SICOM3008PN
Model
SICOM3008PN- Ports - PS1- PS2
Code definition
Code option
Ports: GX/GE
8GE,2GX6GE
Note ：
8GE ：
eight 10/100/1000Base-T(X) ports;
2GX6GE
two 1000Base-X ， 10/100/1000Base-T(X) SFP slots ；
six 10/100/1000Base-T(X) ports.
PS1:power input 1
L15(12-58VDC)
PS2: power input 2
L15(12-58VDC)

Product Overview
2
Note:
We reserve the right to amend the product information listed in this table without notice. To
obtain the latest information, contact our sales or technical support personnel.

Structure and Interface
3
2 Structure and Interface
Caution:
It is recommended to purchase the port dustproof shield (optional) to keep ports clean and ensure
switch performance.
2.1 Front Panel
(1)
(2)
(3)
(4)
Figure 1 Front Panel of SICOM3008PN-8GE-L15-L15
Table 2 Description of the Front Panel
No.
Identifier
Description
(1)
1-8
eight 10/100/1000Base-T(X) ports
(2)
PWR1
Power 1 LED
(3)
PWR2
Power 2 LED
(4)
Alarm
Alarm LED

Structure and Interface
4
(3)
(2)
(1)
(4)
(5)
Figure 2 Front Panel of SICOM3008PN-2GX6GE-L15-L15
Table 3 Description of the Front Panel
No.
Identifier
Description
(1)
7-8
two 1000Base-X,10/100/1000Base-T(X) SFP slots
(2)
1-6
six 10/100/1000Base-T(X) ports
(3)
PWR1
Power 1 LED
(4)
PWR2
Power 2 LED
(5)
Alarm
Alarm LED

Structure and Interface
5
2.2 Top Panel
(1)
(2) (3) (4) (5)
(6)
Figure 3 Top Panel
Table 4 Description of the Top Panel
No.
Identifier
Description
(1)
PWR1
Power terminal block 1
(2)
Console
Console port
(3)
Reset
Reset button for switch
(4)
ALM
Alarm relay output
(5)
Grouding screw
(6)
PWR2
Power terminal block 2