lamber MATIC-M-MA Series User manual

REV.09-JAN/2017
INSTRUCTIONS
MANUAL
MATIC-M-MA
DISHWASHER WITH
PULL THROUGH RACK

DECLARATION OF CONFORMITY
The following : LAMBER SRL – Via Italia 6 – 26855 Lodi Vecchio (LO) ITALY
Declare under our responsibility that:
Apparatus: Professional DISHWASHER with PULL-THROUGH RACK
Trademark:LAMBER
Manufacturer :LAMBER SRL
Mod.
for which this declaration refers to the conformity of the following standards:
Safety of household and electrical appliances - General requirements EN 60335-1(2012) + EC/2014+A11:2014
Safety of household and electrical appliances - Part 2^ Particular requirements for commercial electric dishwashing machines EN
60335-2-58 (2005) + A1 (2008) + A11 (2010).
Household and similar electrical appliances – Electromagnetic fields – Measurement methods for electromagnetic fields of
household appliances and similar apparatus with regard to human exposure EN 62233 (2008)
Limits and methods of measurement of radio disturbance characteristics of electrical motor-operated and thermal appliances for
households and similar purposes, electric tools and similar electric apparatus - EN 55014-1 (2006) + A1 (2009) + A2 (2011)
Limits for harmonic current emissions (equipment input current
 16 A per phase) - EN 61000-3-2 (2014) or >16A and  75A EN
61000-3-12 (2011)
Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current
 16 A. EN 61000-3-3
(2013) o >16A e 75A EN 61000-3-11 (2000)
Immunity requirements for household appliances, tools and similar apparatus. Product family standard EN 55014-2 (1997) + A1
(2001) + A2 (2008)
Safety of machinery Basic concepts, general principles for design - Basic terminology, methodology – EN ISO 12100 (2010).
on the basis of what is foreseen by the Directives - aufgrund der vorgesehenen Richtilinien:
2014/30/EC and 2006/42/EC.
We decline any responsibility for injuries or damage derived from machine misuse, abuse by others or improper machine maintenance or repairs.
(date) Lodi Vecchio li………………………
The administrator
technical file case manager : Ing Roberto Affaba
address : via italia 6 – 26855 – Lodi Vecchio (LO) Italy

WASTE OF ELECTRICAL AND ELECTRONIC EQUIPMENT DIRECTIVE (WEEE,RAEE in Italy) 2002/96/EC AND
SUBSEQUENT 2003/108/EC
The marking shown below indicates that the product cannot be disposed of as part of normal household waste.
Electrical and Electronic Equipment (EEE) can contain materials harmful to health and the environment, and therefore
is subject to separate waste collection: it must be disposed of at appropriate waste collection points or returned to the
distributor against purchase of new equipment of similar type or having the same functions.
The directive mentioned above, to which make reference for further details, provides for punitive actions in case of
illegal disposal of such waste.
Lamber guarantees a percentage of recovery at least of 90% in medium weight for each equipment. The 80% - always
as regards the medium weight- of recovered material is recycled or reused.
LAMBER, manufacturer of this equipment, is enrolled in the Italian WEEE Register – the Register of Producers of
Electrical and Electronic Equipment- from the 18th /02/2008 with the number IT08020000000617.

PRE-WASHING RINSING
FIRST WASHING
PRE-RINSING+RINSING
SECOND WASHING
THIRD WASHING
MODEL MODEL
SCHEDADESMATIC/cdr

TECHNICAL DATA AND DESCRIPTION
The table reported at page 6 shows the basic models of conveyor dishwashers and identifies the single washing areas to
which additional modules can be added to improve their performance.
ACCESSORIES
COLD PRE-WASHING
STEAM CONDENSER - CVM fan kW
DRYING – ASM - MVM fan kW Heat element kW
ADDITIONAL RINSING - RIS
HEAT RECOVERER – RC-CVM fan kW
AUTOTIMER
SPLASH SHIELD (PMC-PMA-PMA/R)
BOOSTER PUMP Motor kW
CVCP HEAT PUMP Motor kW
TECHNICAL SPECIFICATIONS
Model: MATR.
version Left-Right Right-Left
1st speed baskets/hour 2
nd speed baskets/hour
ELECTRIC POWER kW
ELECTRICAL INPUT A
ELECTRIC CABLE mm2
CIRCUIT BREAKER A
lcc ELECTRIC INPUT 6 kA
VOLTAGE
PRE-WASHING TANK ELEMENTS kW ELECTRIC PUMP kW
FIRST WASHING TANK ELEMENTS kW ELECTRIC PUMP kW
SECOND WASHING TANK ELEMENTS kW ELECTRIC PUMP kW
THIRD WASHING TANK ELEMENTS kW ELECTRIC PUMP kW
PRE-RINSING TANK ELEMENTS kW ELECTRIC PUMP kW
RINSING BOILER ELEMENT kW
BOILER ELEMENT kW
GEARED MOTOR kW

INDEX
Declaration of conformity pag. 03
Technical data and description pag. 06
General norms pag. 10
1. Introduction and safety norms pag. 11
1.1. Preliminary observation pag. 11
1.2. General safety norms pag. 11
1.3. Special safety norms pag. 12
1.4. Use of chemical products pag. 12
2. Safety symbols used pag. 13
2.1. Symbols pag. 13
2.2. Residual risks pag. 13
3. Transport and handling of the machine pag. 14
3.1. Transport and packaging pag. 14
3.2. Handling pag. 14
3.3. Unpacking and delivery checks pag. 16
3.4. Suggestions for disposal of packaging materials pag. 16
3.5. Protection of dangerous areas of the machine pag. 17
4. Assembly of the machine pag. 18
4.1. Connection of pre-washing, washing, rinsing and drying modules pag. 18
4.2. Levelling of the machine pag. 22
4.3. Hydraulic and electric connections during the module assembly phase pag. 23
4.4. Final levelling of the machine pag. 26
5. Description of the machine pag. 27
5.1. General description pag. 27
5.2. Use of the dishwasher pag. 28
5.3. Use not permitted pag. 28
6. REGULATIONS FOR THE USER pag. 29
6.1. Warnings before washing pag. 31
6.2. Detergents pag. 31
6.3. De-scaling pag. 32
6.4. Cleaning pag. 32
7. Ignition and use of the rack conveyor Dishwashers pag. 33
7.1. Set-up pag. 33
7.2. Control devices pag. 34
7.3. Optional devices pag. 34
7.4. Symbols of commands pag. 36

8. Washing operation pag. 37
8.1. Washing of dishes pag. 37
8.2. Warnings during washing pag. 37
8.3. Positioning of dishes pag. 39
8.4. Insertion of baskets in the washing tunnel pag. 41
8.5. Warnings after washing- precautions for cleaning pag. 42
8.6. Helpful suggestions pag. 45
8.7. Achievements pag. 45
8.8. Safety devices pag. 45
8.9. Washing flow control system pag. 48
8.10. Useful hints of stainless steel maintenance pag. 49
8.11. Disposal pag. 50
9.NORMS FOR THE FITTER pag. 51
9.0. Connection and hydraulic layout pag. 53
9.1. Detergents pag. 55
9.2. Positioning pag. 57
9.3. Electrical connections pag. 57
9.4. Water supply pag. 58
9.5. Water discharge pag. 59
9.6. Vapour connections pag. 60
9.7. Vapour suction pag. 60
9.8. Testing pag. 61
9.9. Working temperatures pag. 61
9.10. Torque limiter pag. 62
9.11. Air-tightness control – Heat pump pag. 63
9.12. Vapour condensation pag. 63
10. Programming pag. 64
10.1. Modification of parameter’s programming pag. 64
10.2. List of parameters pag. 65
10.3. Description of parameters pag. 66
10.4. Ratio regulation of display contrast pag. 68
11. Some problems that may arise through use of the
Dishwasher, their causes and possible solutions pag. 69
Shelf fitting layout pag. 75
Electrical layout (attached to the documentation)

INSTRUCTIONS MANUAL DISHWASHING MACHINES
MATIC-M-MA
The automatic-rack conveyor dishwashing machines of the MATIC-M-MA series are
designed to wash any kinds of dishes .
The modular system and the various options available allow the make-up of dishwashing
machines with the most appropriate features in order to meet your production, space
saving and energy-saving requirements.
GENERAL NORMS ENGLISH
Thank You for purchasing our Dishwashing Machine.
Perfect washing-up results as far as hygiene concerns and a correct operation of the
dishwashing machine can be assured only in case the instructions reported in the present
manual are carefully followed.
We hope the information reported in the present manual will be helpful to You.
They are based on data and our best updated knowledge.
Carefully read the Instructions reported in the manual, recommendations and suggestions
included. Carefully read the terms of sale too, the ones limiting warranty included.
This appliance in not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance (EN 60335-2-102/7.12).
The dishwasher has to be installed in an area with air recirculation and that complies with the local
work hygiene rules !