LaserLiner ArcoMaster 40 User manual

ArcoMaster 40/60
04
DE
07
GB
10
NL
13
DK
16
FR
19
ES
21
IT
24
PL
FI
PT
SE
NO
TR
RU
UA
CZ
EE
LV
LT
RO
BG
GR
420
600

ArcoMaster 40/60
02 03

DE
ArcoMaster 40/60
GB
06 07
Garantieerklärung:
Die Garantiezeit beträgt 2 Jahre ab Kaufdatum. Von der Garantie
sind ausgenommen: Schäden, die auf unsachgemäßen Gebrauch
oder falscher Lagerung zurückzuführen sind, normaler Verschleiß und
Mängel, die den Wert oder die Gebrauchstauglichkeit nur unerheblich
beeinflussen. Bei Eingriffen nicht von uns autorisierter Stellen erlischt
die Garantie. Im Garantiefall geben Sie bitte das vollständige Gerät mit
allen Informationen, sowie Rechnung einem unserer Händler oder senden
Sie es an Umarex-Laserliner.
Libellengenauigkeit ± 0,25° mm/m
Genauigkeit ± 0,1°
Messbereich 0 – 220°
AutoShut Off 3 min
Schenkellänge 40 / 60 40 / 60 cm
Stromversorgung 2 x 1.5V (Typ AA/LR06)
Abmessungen 40 420 x 57 x 40 mm ( B x H x T )
Abmessungen 60 600 x 57 x 40 mm ( B x H x T )
Gewicht 40 0,8 kg
Gewicht 60 1,05 kg
Artikel-Nr. ArcoMaster 40 075.130A
Artikel-Nr. ArcoMaster 60 075.131A
Technische Änderungen vorbehalten 11.2008
Technische Daten:
Ausschalten/ AutoShut Off:
• Zum Ausschalten des Gerätes die Taste (1) mind. 3 Sek. lang drücken.
Im Ruhezustand schaltet sich das Gerät automatisch aus.
Wasserwaagenfunktion:
• Mit den Vertikal- und Horizontallibellen (9, 10) wird die Ausrichtung zur
Messfläche (14) angezeigt.
Keypad
1. ON/OFF-Activates the 180° flip display
2. Angle bisector
3. Hold measured value
4. Set reference angle
Display
5. Battery indicator: empty
6. Symbol for REF mode
7. Value of measured angle
8. HOLD indicator
ArcoMaster 40/60
9. Suspension eye
10. Vertical vial
11. Horizontal vial
12. Folding measuring arm can
be pulled out on either side
13. Lay edge
14. Base / measuring surface
15. Pivot joint
Rear
16. Battery compartment
17. LCD on both sides
Digital electronic angle gauge with inside or outside angle display from
0° to 220°. The folding measuring arm can be pulled out on either side
and can also be extended. Additional vertical and horizontal vial and
two illuminated flip displays that can be rotated 180°.
11
14
13
17
16
12
10
9
351 42
876

ArcoMaster 40/60
GB
08
GB
09
Inserting batteries:
Open the battery compartment (16) on the rear of the device and insert
two new batteries (AA/LR6) as per the installation symbols. Correct polarity
must be observed.
• As soon as the battery symbol (5) lights up, replace the batteries.
Switching on and measuring:
The ArcoMaster can measure angles continuously from 0° to 220°.
• Press button (1) to switch the device on.
• All display symbols appear for a couple of seconds.
• Place the measuring arm at the required position; the value of
the measured angle (opening angle between the base arm and
the folding measuring arm) appears on the display (7).
• The measured value can be read from both displays.
NOTE: The barely audible noise emitted by the pivot joint is due to
a precise sensor and is part of the design.
Flip display can be rotated 180°
• If angles are to be measured overhead, press button (1) briefly
and repeatedly to rotate the display by 180°.
Holding an angle (HOLD)
• Button (3) can be used to hold the measurement results; once
they have been transmitted, pressing button (3) again will reset them.
Changing the reference angle:
• Angular differences can be transmitted using button (4): Set the required
angle and press button (4). The display then changes to “0.0” and (S)
also appears. The required reference angle is now set and can be
transmitted to other objects. This function can also be used to measure
an angular difference.
IMPORTANT: Once all angles have been transmitted, the new reference
angle must be cleared; to do this, press the REF button repeatedly.
Switching the device off/on will also delete the REF value.
Warranty:
The warranty is valid for 2 years from the date of purchase. The warranty
does not cover damage caused by improper use or storage, normal wear
and tear, or defects which only insignificantly impair the value of the
product or its functioning. Any tampering by unauthorised persons will
render this warranty void. In the event that you need to claim warranty,
please take the complete device together with all information and the
invoice to one of our dealers or
send it in to UMAREX-Laserliner.
Vial precision ± 0,25° mm/m
Accuracy ± 0,1°
Measurement range: 0 – 220°
AutoShut Off 3 min
Arm length 40 / 60 40 / 60 cm
Power supply 2 x 1.5V batteries (AA/LR06)
Dimensions 40 420 x 57 x 40 mm (W x H x D)
Dimensions 60 600 x 57 x 40 mm (W x H x D)
Weight 40 0,8 kg
Weight 60 1,05 kg
Article no. ArcoMaster 40 075.130A
Article no. ArcoMaster 60 075.131A
Technical revisions reserved 11.2008
Technical data:
Switching off/auto shut off:
• To switch the device off, press button (1) and hold it down for
at least 3 seconds. The device will switch off automatically if left
in an idle state.
Function of the spirit levels:
• The vertical and horizontal vials (9, 10) indicate the alignment to the
measuring surface (14).

ArcoMaster 40/60
40: 075.130A / 60: 075.131A / Rev.1108
SERVICE
Umarex GmbH & Co KG
– Laserliner –
Möhnestraße 149, 59755 Arnsberg, Germany
Tel.: [phone], Fax: [phone]
[email protected]
Umarex GmbH & Co KG
Donnerfeld 2
59757 Arnsberg, Germany
Tel.: [phone], Fax: -333
www.laserliner.com
*