LaserLiner LaserRangeMaster Pocket User manual

LaserRangeMaster Pocket
DE
GB
NL
DK
FR
ES
IT
PL
FI
PT
SE
NO
TR
RU
UA
CZ
EE
LV
LT
RO
BG
GR
04
09
14
19
24
29
34
39

02
PIN
1/4"

LaserRangeMaster Pocket
03
x·y=m2
x
y
xy
z
x·y·z=m3

LaserRangeMaster Pocket
09
b
e
d
c
f
a
1.
3.
7.
2.8.
5.
4.6.
GB
KEYPAD:
1.
2.
3.
4.
5.
6.
7.
8.
Measure / Continuous measurement
min / max continuous measurement
length, area, volume, Pythagoras
Unit of measure m/mm/ft/inch
ON/OFF
Measurement point (reference)
rear / tripod / front / pin
addition / subtraction of
lengths, areas, volumes
delete last measurement values
DISPLAY:
a
b
c
d
e
f
Measurement point (reference)
rear / tripod / front / pin
Display length, area / volume /
Pythagoras 1 / Pythagoras 2
Measurement values /
Measurement results
Unit m/mm/ft/inch
Intermediate values / min/max values
Battery symbol
min / max measurement
Important notices:
• Caution: Do not look directly into the beam. Lasers must be kept out
of reach of children. Never intentionally aim the device at people.
• The laser points to the location that will be measured. No objects may
get into the laser‘s line of measurement.
• The device compensates the measurement for different room
temperatures. Therefore allow the device a brief adaptation period
when changing locations with large temperature differences.
• The device is only conditionally useable in outdoor areas and cannot be
used in strong sunlight.
• The device cannot be used in strong sunlight.
• The measurement results of outdoor measurements may be influenced
or falsified by rain, fog and snow.
• In unfavourable conditions, e.g. with poorly reflecting surfaces, the
maximum deviation may be greater than 3 mm.
• Carpeting, upholstery or curtains will not reflect the laser optimally.
Measure to flat surfaces.
• Measurements made through glass (window panes) can falsify mea-
surement results.
• An energy-saving function switches the device off automatically.
• Clean with a soft cloth. Water may not be allowed to penetrate the
housing.
Continuous measurement: Use the ON/OFF button (5) to turn the
device on and press the READ button (1) for about 4 seconds. The device
now measures continuously and displays the smallest value (min), the
largest value (max) and the current value. Another brief press of the READ
button (1) will interrupt continuous measurement or restart it again.

10
3 sec
1x 2x
1x
1x 2x
1x
1x 2x 3x
3x2x1x
1x
1x 2x 3x 4x
1x
Change measurement function:
length area volume Pythagoras 1&2
Change measurement point (reference):
rear tripod front pin
Delete the last measured
value:
Change unit of measure:
m / mm / ft / inch
Switch on, measure and switch off:
device on laser on measure device off
Length measurement:
device on laser on measure
Area measurement:
area laser on 1. measurement 2. measurement
GB

LaserRangeMaster Pocket
11
1x 2x 4x3x
1x 2x
1x 2x
1x 2x
+–
1x 2x
1x 2x
1x 2x
+–
3x
3x
1x 2x
1x 2x
+–
3x 4x
2x 3x 4x1x
Volume measurement:
volume laser on 1. 2. 3. measurement
Addition and subtraction of lengths:
length laser on 1. length +/- etc.
Area calculation:
area laser on 1. area +/- etc.
Volume calculation:
volume laser on 1. volume +/- etc.
GB

12
1x
1x 2x
min max
2x 3x
1x
1x
min
2x 3x
1x
min
1x 2x
1x 2x 3x
1x 2x 3x 4x
MIN / MAX function:
length MIN or MAX laser on start stop
Example: MIN / MAX function for areas:
Note: The MIN / MAX function can be used to find the shortest or
longest distance. MIN is used to determine verticals and horizontals,
MAX is used to determine diagonals. This function can also be used
for area and volume measurements as well as for the Pythagoras
function (see example below).
Pythagoras function 1:
Pythagoras 1 laser on 1. 2. measurement
result:
height
Pythagoras function 2:
Pythagoras 2 laser on 1. 2. 3. measurement result:
height
GB

LaserRangeMaster Pocket
13
Warranty:
The warranty period is 2 years from the date of purchase. The warranty covers
all material or manufacturing defects occurring during this time. The following
are excluded from warranty: Damage due to improper use (e.g. operation with
wrong type of current/voltage, connection to unsuitable power source, fall onto
hard surface, etc.) or improper storage, normal wear and tear, and defects which
only insignificantly impair the value or suitability for use. Any tampering by
unauthorised persons will render this warranty void. In the event that you need to
claim warranty, please take the complete device together with all information and
the invoice to one of our dealers or send it in to Umarex-Laserliner.
Error codes:
Too much ambient light.
The target is too far away.
Target is too dark or too much ambient light.
Use a reflecting material as target for the measurement.
Temperature is too high: > 40 °C.
Temperature is too low: < 0 °C
Replace the battery.
The device is moving too much to measure.
Pythagoras parameter error: The hypotenuse is shorter as one
side of a right triangle.
Err001:
Err002:
Err003:
Err004:
Err005:
Err006:
Err007:
Err008:
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 635 nm
EN 60825-1:2007-10
Inside measurement range O,3 m - 40 m
Accuracy +2 mm
Laser class 2 < 1mW
Laser wavelength 635 nm
Power supply 4 x AAA 1,5 Volt batteries
Dimensions 112 x 59 x 35 mm
Weight 190 g
Auto switch-off 20 s for laser / 5 min for device
Operating temperature 0°C – 40°C
Storage temperature -20°C – 70°C
Article number 080.942A
Technical data: (Subject to technical change without notice 06.2009)
GB

LaserRangeMaster Pocket
SERVICE
Umarex GmbH & Co KG
– Laserliner –
Möhnestraße 149, 59755 Arnsberg, Germany
Tel.: [phone], Fax: [phone]
[email protected]
Umarex GmbH & Co KG
Donnerfeld 2
59757 Arnsberg, Germany
Tel.: [phone], Fax: -333
www.laserliner.com
080.942A / Rev.0609