LEGRAND HPM WMCBL User manual

1. Charger body
2. USB cable (Type A to micro USB)
3. Instruction manual
1. The wireless charger pad works with
Qi-Enabled devices.
2. Stay protected: over current protection, over
temperature protection and over voltage
protection.
Mobile Product
Wireless Mobile Charger-10W
Instruction Manual
Cat. WMCBL
Product Specifications:
Product Features:
Package Content:
Product Outline:
Input: DC 5V/2A, DC 9V/1.67A 10W
Output: DC 5V/1A, DC 5V/1.5A, DC 9V/1.0A
Charging Frequency: 110-205kHz
Charging Distance: ≤8mm
Conversion Rate: >75%
Compliance: ROHS
USBCable(50cm)
MicroUSBport
LED indicator
Non-slipPads
InputPortforpowersupply
Note: Please read this manual and its instructions carefully before use.
Caution: 1. The wireless charger pad works only with Qi-Enabled devices.
2. This product has built-in over temperature protection. If the phone or charger overheats, it will trigger the built-in safety
protection and switch the charger OFF.
3. If this occurs, check if your phone is compatible with wireless charging & phone battery is not faulty.
4. Allow for the charger body to cool down before connecting to the socket and the charger will resume to normal operation.

Operation Instruction:
This product must be used as per these instructions.
1. For indoor use only.
2. Please check that this product’s connector sockets and voltage are compatible with your devices in accordance with their
instruction manuals.
3. Always check for any damage on cord or connectors before use. Using damaged cords may lead to electric shock or fire.
4. This product should not be used in areas exposed to constant vibration, temperature fluctuations, or areas of high humidity.
5. This product is only suitable for information technology equipment.
6. This product contains no serviceable parts and no attempt should be made to repair this product. If the product is faulty it should
be discarded.
7. This product has been designed to operate in ambient temperatures 5°C to 25°C occasionally reaching 35°C.
8. This product must be used in well ventilated area. Do not operate the charger in a bag or inside a closet or any closed space.
9. Do not apply excessive force on the cord while in use.
10. Do no place any object on the cord while in use.
11. Do not unplug connectors by pulling the cord.
12. Do not place the device and cord close to heating elements.
13. The material in this product may vary in colour from batch to batch. Colour matching from one batch to another cannot be
guaranteed.
14. This product must be cleaned only with a dry soft cloth. Avoid using any wet medium for cleaning.
15. Keep the charger out of reach of children.
16. While in use the charger must be placed on a flat surface.
17. While in use, avoid placing charger on a carpet, bed or uneven surface as it may trigger the built-in safety protection and switch
the charger OFF.
18. This product utilises intellectual property in the form of registered designs, trademarks, and/or patents. Such intellectual property
remains the property of Legrand in all cases.
19. Legrand reserves the right to modify the specification of this product at any time.
Warranty
Legrand Australia Pty Ltd will honour all statutory guarantees that you as a consumer
are entitled to rely upon under the Australian and New Zealand Consumer Laws against
a manufacturer, including a guarantee that this product is of acceptable quality.
To make a claim under any statutory guarantee you should first contact the supplier,
or retailer from whom you purchased this product.
CustomerService
For all Customer Service and Technical Support
please call Monday to Friday during business hours.
Legrand Australia
1300 369 777
www.hpm.com.au
Legrand New Zealand
0800 476 009
www.hpm.co.nz
ABN: 31 000 102661
LE11409AAA06_2019
Product Notes:
A. Connect the charging station to compatible USB A outlet with the USB cable provided.
B. Insert the micro USB plug into the charging station. The LED indicator will blink 3 times to indicate it is powered ON.
C. Place your Qi enabled device on the wireless charging pad as shown. Charging must begin with the LED indicator blinking slowly. LED indicator
turns off when the charging has reached 100%.
BC A
Note: Adapter for USB cable, powerpoint, Laptop and smart phones shown above are not included in the pack.