Lennox Hearth Products LSM40-2 User manual

GENERAL INFORMATION
INSTALLATION INSTRUCTIONS FOR DECORATIVE SCREEN KITS FOR USE WITH MONTEBELLO®
DAVE LENNOX SIGNATURE COLLECTION MODELS LSM40-2 & LSM45-2 DIRECT VENT GAS FIREPLACES
INSTALLATION INSTRUCTIONS
Step 1 Using a 7/32” allen wrench and 7/16” nut driver, loosely assemble
the parts as shown in Figure 1 and Figure 2 (do not tighten yet).
Step 2 Adjust the L-bracket to the height needed for this installation (slot
allows up to 1 inch vertical adjustment). When you are satisfied
that the screen will stand stable in front of the fireplace, then
tighten the nuts on both sides.
750,184M REV. B
05/2006
LENNOX HEARTH PRODUCTS
KITS AND ACCESSORIES
Figure 1
Kit Contents: Tools Required:
1 Ea. Screen Assembly
2 Ea. Bottom Legs
2 Ea. Long Screws
2 Ea. Short Screws
2 Ea. Long Spacers
7/32” Allen Wrench
7/16” Nut Driver
H5051 DASK-LSM40-2 Dual Arch Screen Kit, LSM40-2
H5052 SK-LSM40-2 Classic Screen Kit, LSM40-2
H5053 ASK-LSM40-2 Arch Screen Kit, LSM40-2
H5054 DASK-LSM45-2 Dual Arch Screen Kit, LSM45-2
H5055 SK-LSM45-2 Classic Screen Kit, LSM45-2
H5056 ASK-LSM45-2 Arch Screen Kit, LSM45-2
These optional decorative freestanding firescreen panels are designed
to enhance the beauty of the fireplace and helps prevent direct human
contact with the hot glass surface.
A chain is also provided for additional safety. When attached to the
fireplace, it helps prevent the screen from tipping.
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Long Screws
Short Screws
Long Spacers
Short
Spacers
Nuts
L- Brackets
Contoured Legs
Dual Arch Screen Arch Screen Screen
L- Bracket
Nut
Screen
Assembly
Short Spacer
Long Spacer
Contoured Leg
Figure 2 - Assemble Legs & L-Brackets to Screen
Side View
Fireplace Side
Front Side
Assembly
Completed
1
WARNINGS
Hot! Do not touch! These decorative screen
panelsareNOTheatguards. The glassbehindthe
screenswillbehotduringoperation andwillretain
heat for a while after shutting off the appliance .
Severe burns may result. Carefully supervise
children in the same room as appliance.
• As with any similar heating appliance, surfaces of the
frame, the door and appliance can become very hot.
Kit Contents
(dual arch screen shown)
Screen
Assembly
Chain
Instruction Sheet
Chain
GENERALINFORMATION
INSTALLATIONINSTRUCTIONS FOR DECORATIVE SCREEN KITS FOR USE WITH MONTEBELLO®
DAVELENNOX SIGNATURE SERIES MODELS LSM40-2 & LSM45-2 DIRECT VENT GAS FIREPLACES
INSTALLATIONINSTRUCTIONS
Step1 Usinga 7/32” allen wrench and 7/16” nut driver, loosely assemble
theparts as shown in Figure 1 and Figure 2 (donot tighten yet).
Step2 AdjusttheL-bracket to the height needed for this installation (slot
allowsup to 1 inch vertical adjustment). Whenyou are satisfied
that the screen will stand stable in front of the fireplace, then
tightenthe nuts on both sides.
750,184M REV.A
04/2006
LENNOXHEARTH PRODUCTS
KITSAND ACCESSORIES
Figure1
KitContents: ToolsRequired:
1Ea. Screen Assembly
2Ea. Bottom Legs
2Ea. LongScrews
2Ea. Short Screws
2Ea. Long Spacers
2Ea. Short Spacers
4Ea. Nuts
2Ea. L- Brackets
1Ea. Instruction Sheet
7/32”Allen Wrench
7/16”Nut Driver
H2229 DASK-LSM40 DualArch Screen Kit, LSM40-2
H2230 SK-LSM40 ScreenKit, LSM40-2
H2231 ASK-LSM40 ArchScreen Kit, LSM40-2
H2232 DASK-LSM45 DualArch Screen Kit, LSM45-2
H2233 SK-LSM45 ScreenKit, LSM45-2
H2234 ASK-LSM45 ArchScreen Kit, LSM45-2
These optional decorative freestanding firescreen panels are designed
toenhance the beauty of the fireplace and helps prevent direct human
contactwith the hot glass surface.
A chain is also provided for additional safety. When attached to the
fireplace,it helps prevent the screen from tipping.
NOTE:DIAGRAMS& ILLUSTRATIONS ARE NOT TO SCALE.
LongScrews
ShortScrews
LongSpacers
Short
Spacers
Nuts
L-Brackets
ContouredLegs
DualArch Screen ArchScreen Screen
L-Bracket
Nut
Screen
Assembly
ShortSpacer
LongSpacer
ContouredLeg
Figure2 - Assemble Legs & L-Brackets to Screen
SideView
FireplaceSide
FrontSide
Assembly
Completed
1
WARNINGS
Hot! Do not touch! These decorative screen
panelsareNOT heatguards.
Theglass behindthe
screenswillbe hotduringoperation
andwillretain
heatfor a while after shutting off the appliance
.
Severe burns may result. Carefully supervise
childrenin the same room as appliance.
• As with any similar heating appliance, surfaces of the
frame,the door and appliance can become very hot.
KitContents
(dualarch screen shown)
Screen
Assembly
Chain
InstructionSheet
GENERALINFORMATION
INSTALLATIONINSTRUCTIONSFORDECORATIVESCREENKITSFORUSEWITHMONTEBELLO
DAVELENNOXSIGNATURESERIESMODELSLSM40&LSM45DIRECTVENTGASFIREPLACES
INSTALLATIONINSTRUCTIONS
Step1Usingan7/32”AllenWrenchand7/16”NutDriver,looselyas-
semblethepartsasshowninFigure1andFigure2 (do not
tightenyet).
Step2AdjusttheL-Brackettoheightneededforthisinstallation(slot
allowsupto1inchverticaladjustment).Whenyouaresatisfied
thatthescreenwillstandstableinfrontofthefireplace,then
tightenthenutsonbothsides(snugonly-donotovertighten).
Step3Placetheassembledfreestandingscreeninfrontofthefireplace
wheninuse,inacloseproximitytotheglassdoorassembly.
750,184MREV.NC
3/2005
LENNOXHEARTHPRODUCTS
KITSANDACCESSORIES
Figure1-KitContents(dualarchscreenshown)
KitContents: ToolsRequired:
1ea.ScreenAssembly
2ea.longscrews
2ea.shortscrews
2ea.longspacers
2ea.shortspacers
4ea.nuts
2ea.L-brackets
1ea.InstructionSheet
7/32”AllenWrench
7/16”NutDriver
PrintedinU.S.A.©LENNOXHEARTHPRODUCTS2005
P/N750,184MREV.NC3/2005 Page1of1
InstructionSheet
H2229DASK-LSM40DualArchScreen Kit, LSM40
H2230SK-LSM40 ScreenKit,LSM40
H2231ASK-LSM40Arch Screen Kit, LSM40
H2232DASK-LSM45DualArchScreen Kit, LSM45
H2233SK-LSM45 ScreenKit,LSM45
H2234ASK-LSM45Arch Screen Kit, LSM45
Theseoptionaldecorativefreestandingfirescreenpanelsaredesignedto
enhancethebeautyofthefirpleplaceandtoprovidesomeprotectionfrom
anyaccidentalcontactwiththehotglasssurface.
LennoxHearthProductsreservestherighttomakechangesatanytime,withoutnotice,indesign,materials, specifications, prices and the discontinuance ofcolors, styles and products.
Consultyourlocaldistributorforfireplacecodeinformation.
LENNOXHEARTHPRODUCTS
1110WestTaftAvenue
Orange,CA92865
NOTE:DIAGRAMS&ILLUSTRATIONSNOTTOSCALE.
Screen
Assembly
LongScrews
shortscrews
LongSpacers
shortspacers Nuts
L-Brackets
ContouredLegs
DualArchScreen ArchScreenScreen
Figure3-ScreenStyles
L-Bracket
Nuts
Screen
Assembly
ShortSpacers
LongSpacers
ContouredLeg
Figure2-AssembleLegs&L-BracketstoScreen
SideView
FireplaceSide
FrontSide
Assembly
Completed
Chain
LENNOX HEARTH PRODUCTS
2 Ea. Short Spacers
4 Ea. Nuts
2 Ea. L- Brackets
1 Ea. Instruction Sheet

Printed in U.S.A. © LENNOX HEARTH PRODUCTS 2005
P/N 750,184M REV. B 05/2006
Lennox Hearth Products reserves the right to make changes at any time, without notice, in
design, materials, specifications, prices and the discontinuance of colors, styles and products.
Consult your local distributor for fireplace code information.
1110 West Taft Avenue
Orange, CA 92865
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
2
Step 3 Place the assembled freestanding screen in front of the fireplace
in a close proximity to the glass door assembly.
Step 4 Hook the chain to the unit by dropping the free end of chain in the
slot provided on the left side of modesty panel. Check to be sure
that the chain is attached securely. See Figure 3.
Slot on Left Side
of Fireplace
Chain
Screen Assembly
Fireplace
Figure 3 - Attach Chain
Figure 4 - Completed Installation
Note: The “no-tip” chain feature provided with this screen is designed
to work with the following Montebello™ models:
H4793 LSM40MN-2
H4794 LSM40MP-2
H4797 LSM40EN-2
H4795 LSM45MN-2
H4796 LSM45MP-2
H4798 LSM45EN-2
If you have a previously released model of the Montebello™, there will
not be a slot on the fireplace for the chain to attach to.