LesMills SMARTBAND User manual

WARRANTY &
INSTRUCTIONS FOR USE
SMARTBANDTM –CRITERIANOTCOVEREDBYWARRANTY
•Stretching beyond its maximum length of 2.5 times its resting length (by not using the handles and
shortening your grip, knotting, or tying round a pole or similar)
•Cosmetic wear to the surface from regular use that does not affect the performance of the
SMARTBAND
•Damage from shoes or abrasive floor surfaces including outside elements or factors
•Uneven colour patterns, stains, or discolouration at time of purchase or from use or storage
•Creases, folds, and indentations from improper handling and/or storing. It is best to hang the
SMARTBAND or keep it rolled up.
•Improper cleaning with anything other than water with a mild detergent
•Damage from sharp objects
•Damage from excessive amounts of water or other liquids (e.g. submerging under water or using a
water blaster)
To make a warranty claim, either contact your local Les Mills authorized distributor
or visit our website https://lesmills.com.au/smart-tech/equipment-care
Guidelines for use and care of the SMARTBANDTM: https://lesmills.com.au/smart-tech/equipment-care

SMARTBANDTM –WARRANTY INFORMATION
WARRANTY INFORMATION
The SMARTBAND™ and SMARTBAND Extreme™ are designed for regular use. At Les Mills Merchandise
Limited (Les Mills) we stand behind our materials and manufacturing and provide a one-year warranty (from
date of purchase) for manufacturing faults caused by materials or labour. Les Mills and its local SMARTBAND
distributor will, at their discretion, either repair or replace a faulty SMARTBAND in accordance with the
conditions set out below. For all purchases prior to 30 June 2020 the warranty period is two years.
Proper care and maintenance of the SMARTBAND is required (like any other product) to ensure proper
functionality and longevity. The following guidelines should prolong the life and reduce wear on the
SMARTBAND.
Personal Use Customers Only
As a consumer, you are entitled to the applicable legal rights stated in your national legislation concerning the
commerce of consumer goods. This warranty does not restrict these rights.
WARRANTY TERMS
This warranty is only valid in countries where Les Mills has an authorised SMARTBAND distributor or reseller. It
covers manufacturing faults occurring during the warranty period for any SMARTBAND purchased from Les Mills
or a distributor/reseller authorized by Les Mills. The warranty applies only to the original purchaser and does
not cover any second-hand or resold SMARTBAND. The SMARTBAND must remain in the possession of the
original buyer/owner and bear the original manufacturer’s batch code. The one-year warranty period
commences from the date on which the original buyer purchases the SMARTBAND. Warranty repairs will not
extend the warranty period.
EXCLUSIONS
This warranty covers only failures due to manufacturing faults that occur during normal use. This warranty does
not extend to faults resulting from normal wear, misuse, abuse, damage incurred during loading or
transportation, improper storage, modification without the consent of Les Mills, or where the SMARTBAND
has been used other than as recommended by Les Mills (see the following instructions and our guidelines for
using the SMARTBAND at https://lesmills.com.au/smart-tech/equipment-care). This warranty is invalid
where the SMARTBAND does not bear its original manufacturer’s batch code. Thiswarranty is invalid where
the SMARTBAND that is the subject of a warranty claim,has been disposed of prior to a warranty claim being
closed by Les Mills.
Neither Les Mills nor its authorised local SMARTBAND distributor or reseller will be liable for any defects
due to reasons beyond their control,or for consequential damages,or for breach of any implied warranty on
the SMARTBAND.
CLAIM PROCESS
For enquiries, or to make a warranty claim, contact your local Les Mills authorised SMARTBAND distributor or
visit our website https://www.lesmills.com.au/smart-tech/warranty.Please keep your invoice as proof of
purchase as you will need this to submit a warranty claim. Please keep in mind,warranties are voided if any
product is purchased from an unauthorised reseller.
You will also need to include the following details about the faulty SMARTBAND: the batch code, date of
delivery, information about the place and conditions of use of the faulty SMARTBAND,and aprecise
description of the fault (including photographs). The Les Mills local SMARTBAND distributor will liaise with
Les Mills to assess the issue and determine if the warranty applies. We will then work with our local
SMARTBAND distributor to repair or replace the SMARTBAND. If we ask you to return the faulty
SMARTBAND, we will cover the cost of doing so.
SMARTBAND™ – WEAR & CARE
INFORMATION
HANDLING & USE
The SMARTBAND™ is designed for regular use. However, like any product that is produced from a soft material,
it can deteriorate over time and show wear due to interaction with variable and rough surfaces. Normal wear
and tear is not covered under warranty.
SMARTBANDs that show signs of surface wear (blisters, peeling or delamination) are considered to be within
normal wear and tear and do not mean that the band will prematurely break. Any SMARTBAND that breaks,
rips, or otherwise fails due to a manufacturing defect will be covered by our warranty for a period of one year
(from the date of purchase).
Many exercises with the SMARTBAND require you to position the resistance band under your feet. Shoes with
an aggressive tread pattern, sharp edges, or made from abrasive material are likely to cause damage to the
band. You could consider training in bare feet (if appropriate for the exercise).
Avoid exercising on an abrasive surface, such as rough concrete (or carpet) as this could damage the surface of
the resistance band during use. We recommend (if possible) working out on a smooth,hard surface or using a
fitness mat with a durable but soft surface (e.g. grey side of the Les Mills MBX MAT™)
The SMARTBAND has been designed to be stretched to a maximum length of 2.5 times its resting length.
Stretching the SMARTBAND beyond its recommended extension can compromise its soft material properties
and may result in fine tears. Please ensure you use the handles when using your SMARTBAND. Not using the
handles and shortening your grip may result in the SMARTBAND exceeding its maximum extension. A leading
cause of failures within resistance bands is over-stretching/over-extension. If you are not able to achieve the
resistance you require (i.e. if you feel the need to shorten the SMARTBAND), we suggest using a stiffer band
such as SMARTBAND Extreme, or using a small-to-medium hand-held weight plate in addition to the
SMARTBAND.
Tying your SMARTBAND in a knot may cause it to rip or tear when performing a move. We do not recommend
using a SMARTBAND with secondary objects (such as wrapping around a pole). Secondary objects can have
sharp edges, abrasive surfaces or other features which can cause damage to the SMARTBAND. The
SMARTBAND should never be wrapped or tied around an object where it is stretched over a fine edge. When a
resistance band is stretched under these circumstances, these objects create a high level of point loading on
the resistance band,which can cause it to break, tear, or otherwise prematurely fail.
STORAGE
The SMARTBAND should be used and stored indoors, at room temperature. Exposing SMARTBAND to extreme
temperatures (<-5˚C/41˚F; >50˚C/122˚F) and sunlight may affect the performance of the material which may
become brittle and therefore prone to tearing.
For storage in a club/facility, we recommend using the SMARTBAND storage rack (or equivalent wall-mounted
racking) in a cool, dry place. At home, we recommend hanging or rolling.
CLEANING
Regularly clean the SMARTBAND by gently washing with water and a few drops of mild dish soap,using a soft
cloth or sponge. Do not use other solvents or chemicals. Do not apply heat to dry the SMARTBAND.
DIMENSIONS & WEIGHT
Metric = 123 (L) x 2.5 (W) x 0.4 (D) cm; 0.22kg |Imperial = 48 (L) x 0.98 (W) x 0.15(H) inches; 0.47 lb
CONSTRUCTION
The SMARTBAND is manufactured from custom-formulated TPE (thermoplastic elastomer) which,gives the
band the ability to stretch and return to its original state. The SMARTBAND is tested for durability in a high-use
gym environment.
Thebatch code for the SMARTBAND is represented by
two clock-like dials located on one of the handles.