LesMills SMARTSTEP User manual

INSTRUCTIONS FOR USE

INSTRUCTIONS FOR USE, STORAGE AND CARE
Guidelines for use and care of the SMARTSTEP™:www.lesmills.com/merchandise/equipment/care
Proper care and maintenance for the SMARTSTEP is required (like any other product) to ensure proper
functionality. Les Mills is not responsible for any damage or injury due to misuse or the failure to
properly assemble the SMARTSTEP.
Do not drop, throw or knock the SMARTSTEP deck or risers. Do not drop weights on top of the
SMARTSTEP deck or risers. This will help to avoid damage to the item finish or the item itself.
Store the SMARTSTEP equipment by stacking the decks on top of one another, and the risers on top
of one another on a solid, level surface. Maximum recommended stack height of 21 decks or 32 risers.
Do not store the SMARTSTEP equipment in extreme temperatures (<-5°C/41°F; >50°C/122°F). Keep
product stored away from moisture or direct heat.
Regularly clean SMARTSTEP equipment by wiping down with a damp soft cloth using mild detergent
(if necessary).
Do not use the SMARTSTEP equipment outside or on non-standard gym/studio flooring.
The SMARTSTEP was designed to withstand weights of up to 136kg/300lbs.
When using or handling your SMARTSTEP equipment, do not bring it into contact with sharp or
abrasive objects/materials.
ASSEMBLY: SMARTSTEP equipment comprises five components: 1x Deck 4x Risers
The deck can be used with or without risers depending on the height required. To attach risers, place
either one or two risers under the deck at each end and apply weight to the deck. When the deck and
risers are correctly engaged, risers will form a temporary bond with the deck.
To remove the risers from the deck,
gently pull the risers and deck apart.
PROPULSIVE WORK (SPRINGING OFF DECK) We recommend limiting the incline to one riser high (a
single riser under one side of the deck) for propulsive work. Using more than one riser for propulsive
work may lead to injury.
SMARTSTEPMEQUIPMENT –WARRANTY INFORMATION
At Les Mills Merchandise Limited (Les Mills) we stand behind our materials and manufacturing and
provide a two year warranty (from date of purchase) on all SMARTSTEP equipment for manufacturing
faults caused by materials or labor that occur during the warranty period. Les Mills’ local SMARTSTEP
distributor will, at its discretion, either repair or replace faulty SMARTSTEP equipment in accordance
with the conditions set out below.
PERSONAL USE CUSTOMERS ONLY
As a consumer, you are entitled to the applicable legal rights stated in your national legislation
concerning the commerce of consumer goods. This warranty does not restrict these rights.
WARRANTY TERMS
This warranty is valid only in countries where Les Mills has an authorized SMARTSTEP equipment
distributor. It covers manufacturing faults occurring during the warranty period in SMARTSTEP
equipment purchased from Les Mills or a distributor authorized by Les Mills. The warranty applies
only to the original purchaser and does not cover second-hand equipment or re-sold equipment.
The equipment must remain in the possession of the original buyer/owner and bear the original
manufacturer’s serial number. The two year warranty period commences from the date on which the
original buyer purchases the equipment. Warranty repairs will not extend the warranty period.
You can find the serial number for your SMARTSTEP equipment underneath the deck on a white
sticker.
EXCLUSIONS
This warranty only covers failures due to manufacturing faults that occur during normal use. This
warranty does not extend to faults resulting from normal wear, misuse, abuse, corrosion, damage
incurred during loading or transportation, improper storage, modified without the consent of Les
Mills or where the SMARTSTEP equipment has been used other than as recommended by Les Mills
(See the instructions below and our guidelines for using the SMARTSTEP equipment at
www.lesmills.com/merchandise/equipment/care) . This warranty is invalid where the SMARTSTEP
equipment does not bear its original manufacturer’s serial number. The warranty is invalid where the
SMARTSTEP equipment that is the subject of the warranty claim has been disposed of prior to a
warranty claim being closed by Les Mills.
Neither Les Mills nor its authorized local SMARTSTEP distributor will be liable for any defects due to
reasons beyond their control or for consequential damages or for breach of any implied warranty on
the range of SMARTSTEP equipment.
CLAIM PROCESS
For enquiries, or to make a warranty claim, either contract your local Les Mills authorized
SMARTSTEP equipment distributor, visit www.lesmills.com/merchandise/equipment/warranty OR
email Les Mills at warrant[email protected].Please keep your invoice as proof of purchase as you will
need it to submit a warranty claim.
You will also need to include the following details: (i) the serial number, (ii) the date of delivery, (iii)
information about the place and conditions of use of the faulty SMARTSTEP equipment and a
precise description of the fault (including photographs). The local Les Mills authorized distributor
will liaise with Les Mills to assess the issue and determine if the warranty applies. Les Mills will then
determine whether to repair or replace the SMARTSTEP equipment (at our sole discretion). If Les
Mills asks you to return the faulty SMARTSTEP equipment, Les Mills will cover the cost of doing so.
HORIZONTAL USE - A maximum of 6 risers may be used under
the SMARTSTEP deck at each end. Follow the assembly
instructions when attaching risers.
INCLINE USE - For all incline uses, one end of the deck must
be resting on the ground. To use the SMARTSTEP on an incline,
position one end of the deck on the ground, and the other
correctly on the riser(s) by placing the recess of the deck on the
rim of the top riser as shown.
SUPINE AND PRONE BENCH INCLINE WORK (LYING ON
THE DECK). Up to four risers may be stacked under one end of
the deck to achieve a range of incline angles.