LesMills SMARTSTEP User manual

WARRANTY &
INSTRUCTIONS FOR USE
To prevent damage to the top surface of the SMARTSTEP, we recommend checking the bottom of your footwear to
ensure there are no stones or sharp objects embedded in the sole. Do not drop weights on top of the SMARTSTEP
deck or risers.
When using or handling your SMARTSTEP equipment, do not bring it into contact with sharp or abrasive
objects/materials.
We recommend working out on a smooth, hard, and level surface for stability and safety. We do not recommend
placing a mat under any exercise platform as the mat could slip or slide when jumping on or off the step.
Avoid exercising outside or on an abrasive surface (such as rough concrete), as this could damage the rubber feet on
the risers or scratch the base of the deck.
The SMARTSTEP was designed to withstand weights of up to 136kg/300lb.
STORAGE
Store the SMARTSTEP equipment indoors, keeping it away from moisture or direct heat. Do not store in extreme
temperatures (<-5˚C/41˚F; >50˚C/122˚F).
In a club, SMARTSTEP equipment should be stored as separate stacks:
▪Stack the decks on top of one another –maximum recommended stack height of 21 decks;
▪Stack the risers on top of one another on a solid, level surface –maximum recommended stack height of
32 risers.
At home, the deck and risers can be stored together or separately.
CLEANING
Clean SMARTSTEP equipment by gently washing with water and a few drops of mild dish soap,using a soft cloth
or sponge.
DIMENSIONS & WEIGHT
Metric: Deck = 105.4 x 41.6 x 10cm, 6.2kg; Riser = 42.1 x 42.1 x 8cm, 0.70kg
Imperial: Deck = 41.5 x 16.38 x 3.94 inches, 13.14 lb; Riser = 16.57 x 16.57 x 3.15 inches, 1.54 lb
CONSTRUCTION
High-quality raw materials to ensure durability and safety. SMARTSTEP equipment is tested for durability in a
high-use gym environment.
SMARTSTEPTM –CRITERIA NOT COVERED BY WARRANTY
•Cosmetic wear to the surface from regular use that does not affect the performance of the SMARTSTEP
•Uneven colour patterns or discolouration at time of purchase or from use or storage
•Damage from abrasive floor surfaces including outside elements or factors or sharp objects
•Damage from misuse/rough handling (e.g. dropping, dragging etc)
•Improper cleaning with anything other than water with a mild detergent
•Damage from excessive amounts of water or other liquids (e.g. submerging under water or using a
water-blaster)
To make a warranty claim, either contact your local Les Mills authorised distributor
or visit our website https://www.lesmills.com.au/smart-tech/warranty
Guidelines for use and care of the SMARTSTEPTM: https://lesmills.com.au/smart-tech/equipment-care

SMARTSTEPTM –WARRANTY INFORMATION
WARRANTY INFORMATION
The SMARTSTEP™ is designed and built to last. At Les Mills Merchandise Limited (Les Mills) we
stand behind our materials and manufacturing and provide a two-year warranty (from date of purchase)
for manufacturing faults caused by materials or labour. Les Mills and its local SMARTSTEP distributor will,
at their discretion, either repair or replace faulty SMARTSTEP equipment in accordance with the
conditions set out below.
Proper care and maintenance of SMARTSTEP equipment is required (like any other product) to ensure proper
functionality and longevity. Les Mills is not responsible for any damage or injury due to misuse or the failure to
properly assemble the SMARTSTEP. The following guidelines should prolong the life and reduce wear on the
SMARTSTEP.
Personal Use Customers Only
As a consumer, you are entitled to the applicable legal rights stated in your national legislation concerning the
commerce of consumer goods. This warranty does not restrict these rights.
WARRANTY TERMS
This warranty is only valid in countries where Les Mills has an authorised SMARTSTEP distributor or reseller. It
covers manufacturing faults occurring during the warranty period for any SMARTSTEP purchased from Les Mills
or a distributor/reseller authorised by Les Mills. The warranty applies only to the original purchaser and does
not cover any second-hand or resold SMARTSTEP. The SMARTSTEP must remain in the possession of the original
buyer/owner and bear the original manufacturer’s serial number (for the SMARTSTEP deck) or batch code (for
the SMARTSTEP risers). The two-year warranty period commences from the date on which the original buyer
purchases the SMARTSTEP. Warranty repairs will not extend the warranty period.
.
EXCLUSIONS
This warranty covers only failures due to manufacturing faults that occur during normal use. This warranty does
not extend to faults resulting from normal wear, misuse, abuse, corrosion, damage incurred during loading or
transportation, improper storage, modification without the consent of Les Mills, or where the SMARTSTEP
equipment has been used other than as recommended by Les Mills (see the following instructions below and
our guidelines for using the SMARTSTEP equipment at https://lesmills.com.au/smart-tech/equipment-care).
This warranty is invalid where the SMARTSTEP equipment does not bear its original manufacturer’s serial
number (for the SMARTSTEP deck) or batch code (for the SMARTSTEP risers). Thiswarranty is invalid where the
SMARTSTEP equipment that is the subject of a warranty claim,has been disposed of prior to a warranty claim
being closed by Les Mills.
Neither Les Mills nor its authorised local SMARTSTEP equipment distributor or reseller will be liable for
any defects due to reasons beyond their control or for consequential damages or for breach of any
implied warranty on the range of SMARTSTEP equipment.
CLAIM PROCESS
For enquiries, or to make a warranty claim, either contact your local Les Mills authorised SMARTSTEP
equipment distributor/reseller or visit https://www.lesmills.com.au/smart-tech/warranty. Please keep your
invoice as proof of purchase as you will need this to submit a warranty claim. Please keep in mind warranties
are voided if any product is purchased from an unauthorised reseller.
You will also need to include the following details about the faulty SMARTSTEP equipment: the serial
number or batch code, date of delivery, information about the place and conditions of use of the faulty
SMARTSTEP equipment and a precise description of the fault (including photographs). The Les Mills local
SMARTSTEP equipment distributor will liaise with Les Mills to assess the issue and determine if the warranty
applies. We will then work with our local SMARTSTEP equipment distributor to repair or replace the SMARTSTEP
equipment. If we ask you to return the faulty SMARTSTEP equipment, we will cover the cost of doing so.
SMARTSTEPTM –WEAR & CARE INFORMATION
Guidelines for the use and care of SMARTSTEP™: https://lesmills.com.au/smart-tech/equipment-care.
HANDLING & USE
The SMARTSTEP equipment pack is made up of five components: 1x Deck and 4x Risers
Assembly: The deck can be used with or without risers depending on the height required. To attach risers,
place either one or two risers under the deck at each end and apply weight to the deck. When the deck and
risers are correctly engaged, risers will form a temporary bond with the deck. Always make sure the risers are
clicked into the deck to ensure a secure platform.
To remove the risers from the deck,
gently pull the risers and deck apart.
Propulsive Work (Springing-off Deck) We recommend limiting the incline to one riser high (a single riser under
one side of the deck) for propulsive work. Using more than one riser for propulsive work may lead to injury.
A video showing this process can be found at https://lesmills.com.au/smart-tech/equipment-care.
Do not drop, throw, or drag the SMARTSTEP deck or risers. Do not drag the deck along the floor. We recommend
carrying the SMARTSTEP deck and risers separately (not risers connected to deck). Hand holds are provided at
both the ends and sides of the deck. Risers can easily be carried over your arm.
The serial number for the SMARTSTEP is
located underneath the deck –see white
sticker with serial number.
The risers have batch code dials (like the
SMARTBAND) on the inside surface.
Horizontal Use - A maximum of 6 risers may be used under the
SMARTSTEP deck at each end. Follow the assembly instructions
when attaching risers.
Incline Use - For all incline uses, one end of the deck must be
resting on the ground. To use the SMARTSTEP on an incline,
position one end of the deck on the ground, and the other
correctly on the riser(s) by placing the recess of the deck on
the rim of the top riser as shown.
Supine and Prone Bench Incline Work (lying on Deck). Up to
four risers may be stacked under one end of the deck to
achieve a range of incline angles.