LesMills SMARTBAR User manual

INSTRUCTIONS FOR USE
Claim Process
In the event that you want to make a warranty claim, in the first instance complete and
submit the Warranty Claim Form to us (available on our website www.lesmills.com/
smartbar), including the following details:
1. Serial number of the faulty SMARTBAR equipment (located on the inside of the
release handle).
2. Date of delivery of the faulty SMARTBAR equipment to the original purchaser.
3. Proof of purchase. Please retain your invoice in a safe place as proof of purchase as it
is a precondition to any warranty action.
4. Information about the place and conditions of use of the SMARTBAR equipment
(home, gym etc.).
5. Precise description of the fault (including photographs of the faulty SMARTBAR
equipment).
Les Mills’ local SMARTBAR distributor will liaise with us to assess the issue and determine if
the warranty applies. We will then work with our local SMARTBAR distributor to repair or
replace the product. If we ask you to return the faulty SMARTBAR equipment, we will cover
the cost of doing so.
Enquiries
Enquiries regarding warranties should be made to Les Mills at [email protected]
or your local Les Mills-authorised SMARTBAR equipment distributor.
ST_67 - Smartbar 2.0 Instructions – Personal Use.indd 1-2 22/11/17 3:35 PM
Exclusions
This warranty covers only failures due to manufacturing faults that occur during normal use.
This warranty does not extend to faults resulting from normal wear, misuse, abuse,
corrosion, damage incurred during loading or transportation, where the SMARTBAR
equipment has been used other than as recommended by Les Mills or modified without
the consent of Les Mills or improper storage. This warranty is invalid where the SMARTBAR
equipment does not bear its original manufacturer’s serial number sticker or where the
sticker has been removed, altered or tampered with in any way. The warranty is invalid
where the SMARTBAR equipment that is the subject of the warranty claim has been
disposed of prior to a warranty claim being closed by Les Mills.
Neither Les Mills nor its authorised local SMARTBAR equipment distributor will be liable for
any defects due to reasons beyond their control or for consequential damages or for
breach of any implied warranty on the range of SMARTBAR equipment.

INSTRUCTIONS FOR USE
Slide the SMARTBAR weights plates into the gator head, ensuring that the weights plate
locks securely into place. Load weights plates one by one up to a maximum of three
weights plates (of any weight) on each side. Load weights from largest to smallest so that
the heaviest weight sits on the inside of the gator (i.e. closest to where it attaches to the
bar).
SMARTBAR EQUIPMENT – WARRANTY INFORMATION
PERSONAL USE CUSTOMERS ONLY
As a consumer, you are entitled to the applicable legal rights stated in your national
legislation concerning the commerce of consumer goods. This warranty does not restrict
these rights.
At Les Mills Merchandise Limited (Les Mills) we stand behind our materials and
manufacturing and offer customers who purchase SMARTBAR equipment a warranty on all
SMARTBAR Equipment for manufacturing faults caused by materials or labour that occur
during the warranty period. Les Mills’ local SMARTBAR distributor will, at its discretion,
either repair or replace faulty SMARTBAR equipment in accordance with the conditions
set out below.
Warranty Terms
This warranty is valid only in countries where Les Mills has an authorised SMARTBAR
equipment distributor. It covers manufacturing faults occurring during the warranty period
in SMARTBAR equipment purchased from Les Mills or a distributor authorised by
Les Mills. The warranty applies only to the original purchaser and does not cover second
hand equipment or re-sold equipment. The equipment must remain in the possession of
the original buyer/owner and bear the original manufacturer’s serial number. The warranty
period commences from the date on which the original buyer purchases the equipment.
Warranty repairs will not extend the warranty period.
When using or handling your SMARTBAR equipment, do not bring it into contact with
sharp or abrasive objects/materials including jewelery.
INSTRUCTIONS FOR STORAGE AND CARE
Store indoors in a SMARTBAR Equipment Storage Rack, or horizontally on a solid, level
surface. Do not store the SMARTBAR bar on its end vertically. Ensure weight plates are
removed from the bar for storage.
Do not store the SMARTBAR equipment in extreme temperatures (<-5 degrees Celsius ;
>50 degrees Celsius). Keep product stored away from moisture or direct heat.
Regularly clean SMARTBAR equipment by wiping down with a damp soft cloth using mild
detergent (if necessary).
Do not use the SMARTBAR equipment outside or on non-standard gym/studio flooring.
To release a weight plate, lay the SMARTBAR bar on the ground and pull the red handle
towards the centre of the bar and then slide the weight off the bar. Remove weights one
by one. Do not drop or hold the bar vertically at any time to add/remove the weights
or during use or storage. A video showing this process can be found at: https://
www.lesmills.com/merchandise/equipment/care/
Do not drop or throw or knock the SMARTBAR bar or weight plates. This will help to
avoid damage to the item finish or item itself.
Do not leave the SMARTBAR bar (with or without weight plates attached) hanging over
SMARTSTEP equipment, other platform or bench equipment or any other surface
where the gator(s) is/are hanging off the ground.
ST_67 - Smartbar 2.0 Instructions – Personal Use.indd 3-4 22/11/17 3:35 PM