LG Isai V30+ Service manual

MBM66337701(1.0)
All company names and product names in this manual are either trademarks or registered
trademarks. The trademark symbol (TM) and the registered trademark symbol (®) may be
omitted in places in this manual.
Sold by : KDDI CORPORATION, OKINAWA CELLULAR TELEPHONE COMPANY
Imported by : LG Electronics Japan, Inc.
Manufactured by : LG Electronics Inc.
January 2018, 1st Edition
Please read this manual rst
Setting Guide
Thank you for purchasing the "isai V30+" (simply called the "product" from here on).
This "Setting Guide" describes the basic operations and initial settings for
using the product.
Before using the product, be sure to read the "Notes on Usage" to ensure
correct and safe use.
* For details, refer to the "Basic Manual application" installed on the product or "取扱
説明書 (詳細版) (Full Instruction Manual)" (Japanese) available on the au homepage.
■Basic operations to input characters
This product uses the software keyboard displayed at the bottom of the
screen to enter characters.
Tap the keys on the screen to enter characters.
a
b
c
d
e f
g
b
h
i
《10-key》
Switchingthekeyboardtype
《QWERTY》
《50-keyboard》
a Display the characters assigned in reverse order.
b Moves the cursor to the right/left and changes the
range of characters when converting characters.
c Enters pictograms/symbols/emoticons.
d Switches the input mode.
e Switches upper case/lower case of entering
character.
f Inputs the characters of each key.
g Deletes the character to the left of the cursor.
h Inputs a space and converts characters in
Hiragana-Kanji input mode.
i Start a new line/conrm the characters input.
Flick input
You can ick the key up, down, right, or left to
enter a character. Touch and hold the key to
display the candidates that can be entered by
icking (ick guide). You can also input by icking
after conrming the candidates which can be
entered.
Flick guide
■Basic operations of the keys
Powerkey(rear)
●Power ON
Press and hold the power key.
●Power OFF
Press and hold the power key → Select [Power
o󱐯] → [POWER OFF]
●Sleep mode
Press the power key in operation to switch to
sleep mode.
●Cancel sleep mode
Press the power key in sleep mode to display the
lock screen.
Display(Touchpanel)
Directly touch an item or button displayed on the
screen to operate.
Taskbutton
Check running applications.
Press and hold an app while it is running to start
up Multi Window.
Homebutton
Use it to display the Home screen.
Backbutton
Returns to the previous screen.
●Unlocking the screen
Swipe on the lock screen.
●Learning the Basic
Operations
Describes the names of parts
and operation.
●Initial Settings
Described in the steps for the
following:
・
Language settings, Accessibility
・Wireless LAN (Wi-Fi®) settings
・Google account settings
・Other settings
●au Initial Settings
Sets au ID and services.
●au-mail Settings
Sets up to use au-mail (@ezweb.
ne.jp).
●"Basic Manual application"
Installs and starts up the Basic
Manual.
●Making a Call
Describes how to make calls.
●Receiving a Call
Describes how to receive calls.
●Transferring Contacts
You can transfer data from your
previous mobile phone.
●How to Transfer Data from
the au Settings Menu
You can restore/store data from
your previous au phone to this
product using a microSD memory
card or au servers.
●Reducing Battery Consumption
You can reduce the battery
consumption by setting up
Battery saver.
●Setting screen brightness
and screen timeout
Describes how to set screen
brightness and screen timeout.
LearningtheBasicOperations
auInitialSettings
■Setting au ID
When you have set an au ID, you can use various au services including "au Simple Payment Service" which o󱐯ers you a simple way to purchase applications
from au Smart Pass and Google Play.
● After completing initial settings, you can also setup au services on the Home screen by tapping [Settings] → "General" tab → [au Settings Menu] → [au
Initial Setting].
1 2 3 4 5
[GET STARTED]
* Place checkmark on "Update",
if you want to update pre-
installed applications.
[Sign in]*1 Enter a security number
*2
→ [次へ (Next)]
Enter a password →
[同意して次へ (Agree and
next)]
[次へ (Next)]
6 7 8 9 10
[次へ (Next)] [ALLOW]*3 Place checkmarks on
apps to install*4 → [Next]
Place checkmarks on
contents to set → [Next]
[Finish]*5
*1 If you have registered an au ID previously, steps 3 and 4 are not displayed. Proceed to step 5.
*2 The security number is the four-digit security code you wrote on the application form.
*3 A conrmation screen is displayed for permission several times. Continue by following the on-screen instructions.
*4 If "Select apps" is displayed in the "Backed up" eld, you can check the application by tapping.
*5 If you have backup data in "Data Storage App" application, the data can be returned, by tapping "Data Storage App".
InitialSettings:STEP1
This section describes the initial settings screen that appears when you
turn on the power for the rst time.
■Starting initial settings
●Changing the language ●Setting up Accessibility
[日本語（日本）] → select
language → [ ]
* Once you select your desired
language, the language for
the initial settings screen also
changes. From here on, follow
the onscreen instructions.
After switching to the English
display, [Accessibility] →
review the precautions,
[SETTINGS] → set
Accessibility → [ ] → [ ]
* The operations herein di󱐯er
depending on the congured
Accessibility settings.
* If the language was not switched via the initial settings, switch the
language via the following procedures.
On the Home screen, [設定 (Settings)] → "一般 (General)" tab → [言語
と入力 (Language & input)] → [言語 (Language)] → [言語の追加 (ADD
LANGUAGE)] → [English] → drag "English (United States)" and drop it
at the very top.
The folder names will not be changed from the language of the initial
settings. Convert the folder names contained in "Setting Guide" (this
manual), "Basic Manual", "Notes on Usage" into Japanese as per the
following and operate.
English Japanese
Basic Functions 基本機能
Management デバイス管理
InitialSettings:STEP4
■Other settings
1
Check legal documents →
place checkmarks on "I agree"
→ [DONE]
InitialSettings:STEP3
■Setting up Google account
You can use online services provided by Google, such as Gmail and Google Play, by setting up a Google account.
This section describes how to set up an account on the initial settings screen that appears when you turn on the power for the rst time.
User name Register your Google account (user ID) and the characters that you want to use as your mail address.
You can register a desired name, but a name already registered by another user cannot be set.
Password Register password for the Google account.
1234567
[Set up as new]
* To copy the settings of an Android
device you used before to the
product, tap [Copy your data].
[More options] → [Create account]
* If you already have a Google account,
tap the "Email or phone" eld.
* If you tap [SKIP], you can skip Google
account setup (in that case, follow the
instructions displayed on the screen).
Proceeding the settings will display the
screen on step 10.
Enter your "First name" and "Last
name" → [NEXT]
Enter your birthday and gender →
[NEXT]
Enter your user name → [NEXT]
* User names already being used by
another user cannot be used.
* If an entered user name is
unavailable, an entry screen for
prompting another user name
appears.
Enter your password → re-enter
the password → [NEXT]
Conrm the contents → [YES, I'M IN]
8 9 10 11 12 13
Conrm the contents → [I AGREE] [NEXT] Set whether to register ngerprint
* To register ngerprint, select "Set up
ngerprint" → [NEXT]
* To not install ngerprint, select "No,
thanks" → [NEXT] → [SKIP ANYWAY]
Conrm the Google service
contents → [AGREE]
[NEXT] Set whether to use the Google
Assistant
* Tap [YES I'M IN] here.
InitialSettings:STEP2
■Setting Wireless LAN (Wi-Fi®)
Using the wireless LAN (Wi-Fi®) function, you can access to the Internet
using a wireless LAN environment built in your home or a public wireless
LAN environment away from home.
When setting the wireless LAN (Wi-Fi®) as described in this guide, you need
to be in an environment where the radio waves can be received from the
wireless LAN device or public wireless LAN that you want to access to.
Check the following information before setting the wireless LAN (Wi-Fi
®
) function.
SSID The name set for the wireless LAN device or public
wireless LAN service that you are connecting to
Password The password for connecting to the wireless LAN
device or public wireless LAN service
* Connection to all public wireless LAN services is not guaranteed.
* You may need a separate contract with a service provider to use some
public wireless LAN services.
* Enabling the wireless LAN (Wi-Fi®) function uses a lot of battery power.
We recommend turning o󱐯 the wireless LAN (Wi-Fi®) function when not
using it.
1 2
[ ] of "Wi-Fi" → tap
the network that you are
connecting to
* If you do not set up, tap
[NEXT].
Enter Password →
[CONNECT]→ conrm the
connection → [NEXT]
* This step is not required if
you select a wireless LAN
(Wi-Fi
®
) network without
security settings.
■How to view the notication panel
When the notication icons appears on the left side of the status bar, slide
the status bar down to open the notication panel to check overview of the
notication or launch the application.
1 2
Slide down the status bar
The notication panel appears.
■Setting Application authority
When launching the applications/functions to access the functions or
information of the product for the rst time, the conrmation screen appears
to request the permission for the access authority.
When the conrmation screen appears, conrm the contents and tap "DENY"
or "ALLOW".
• If the application authority is not allowed, applications/functions may not
be launched or using functions may be restricted.
• The explanation screen may be displayed depending on the application/
function. Also, the conrmation screen may be displayed several times or
the display may be di󱐯erent. Check the displayed contents carefully, follow
the onscreen instructions.
• In this manual, description of the conrmation screens may be omitted.
■Basic operations of the touch panel
The display of the product is a touch panel and you can touch directly with
your nger to operate.
Tap/Double Tap
Lightly touch an icon
or item and then
immediately release
your nger. Tapping
the same place twice
is called a double tap.
Touch and hold
Keep touching the
screen.
Slide
While your nger is
lightly touching the
screen, move it in the
desired direction.
Flick (Swipe)
Quickly move (icking)
your nger up, down,
right, or left.
Pinch
Touch the screen with
two ngers and widen
(pinch-out) or narrow
(pinch-in) the ngers'
distance.
Drag
Keep touching items
or icons and trace to
the desired position.

ReducingBatteryConsumption
■Using Battery Saver
Set up to switch to Battery Saver when the battery is running low.
1234
On the Home screen,
[Settings]
"General" tab →
[Battery]
[Battery saver] [Extended]/[Maximum]
■Setting Battery saver
12345
On the Home screen,
[Settings]
"General" tab →
[Battery]
[Battery saver] [Edit mode]
* "Extended" is set on this
screen.
Set the battery saver
settings if necessary →
[SAVE]
HowtoTransferDatafromtheauSettingsMenu
You can restore/store data from your previous au phone to this product using a microSD memory card or au servers.
• If you restore data using au server, store the data using your previous au phone to the au server in advance. You
need to set up an au ID to use the au server.
(If your previous au phone does not have the au Settings Menu, use the au Cloud app.)
• If you restore data using microSD memory card, save the data using your previous au phone to a microSD memory card.
(If your previous au phone does not have the au Settings Menu, use the au backup app.)
1234
On the Home screen,
[Settings]
"General" tab → [au
Settings Menu]
[Data Transfer]
* If the terms of use
appears, check the content
and follow the onscreen
instructions.
[機種変更はこちら (Model
changing is here)]
* Perform data transfer
according to the screen
guidance.
If you want to use the "Data Storage App" application to automatically save your photos, contacts, etc. to the au
server, you can set it up by following the procedure below.
• On the Home screen, [Settings] → "General" tab → [au Settings Menu] → [Backup Setting]
ReceivingaCall
You can receive a call in the following steps.
1 2 3
During an incoming
call, [Answer]
The call starts. [End] to end the call
Settingscreenbrightnessandscreentimeout
■Setting screen brightness
1 2
On the Home screen,
[Settings]
"Display" tab → drag
the "Brightness" slider
to the right and left to
adjust the brightness
■Setting screen timeout
1 2 3
On the Home screen,
[Settings]
"Display" tab → [Screen
timeout]
Tap the time until screen
turns o󱐯
TransferringContacts
You can transfer the data from your previous phone to the product using
a microSD memory card.
1Save the
contacts
(address book)
from your
previous phone
to a microSD
memory card,
and insert the
card into the
product
Refer to the
instruction manual
of your previous
phone, etc. on
how to save the
contacts.
2 3
On the Home screen,
[Basic Functions] →
[Contacts]
[ ] → [Manage
contacts] → [Import]
* When a contact is not
registered, tap [ ] →
[Import] → the import
source to proceed to step
5. If a saving location
screen appears, select
the desired account or
location.
4 5 6
[SD card] → [OK]
* If a saving location
screen appears,
select the desired
account or location.
Place checkmarks
on the item to be
imported → [IMPORT]
[IMPORT]
* When the import is
complete, "Contacts
imported" appears.
MakingaCall
■Entering a phone number to make a call
1 2
On the Home screen,
[ ]
Enter a phone
number → [ ]
■Calling from Contacts
1 2 3
On the phone screen,
tap "Contacts" tab
Tap the other party
to be called
* Tap [ ] to skip
the contact details
screen and directly
make a call.
On the contact
details screen, tap
a phone number
■Calling from Call logs
1
On the phone
screen, tap "Call
logs" tab
2
Tap the other
party to be called
3Tap a phone
number
"BasicManualapplication"
■Downloading "Basic Manual application"
1 2
On the Home screen,
[Basic Functions] →
[Basic Manual]
[UPDATE] → [CONTINUE]
* If conrmation screens are
displayed, follow the onscreen
instructions to operate.
■Using "Basic Manual application"
1 2 3
On the Home screen,
[Basic Functions] →
[Basic Manual]
Conrm contents
displayed → [ ]
The Basic Manual cover
is displayed.
* Packet communications fees are charged for downloading the “Basic
Manual application” (no charges for Wi-Fi® connections).
■Receiving a call during sleep mode
1 2 3
Swipe "Answer" in
any direction during
an incoming call
The call starts. [End] to end the call
● To use au-mail, subscription to LTE NET is required. If you did not
subscribe it when you purchased the product, contact an au shop or
Customer Service Center.
● For initial setting, please perform in good signal reception in Japan.
It may not be set correctly where the signal reception is bad or while
moving. The initial setting cannot be performed via Wi-Fi
®
communications.
● Depending on the time, the initial setting takes about 30 seconds to 3
minutes. Please wait while the "Eメールアドレスの設定中です。しばらくお待ちく
ださい。(The e-mail address is in setting. Please wait.)" message appears.
■Initial Settings
1 2
On the Home screen, [ ]
The "License agreement" of au mail app
appears, and conrm the contents →
[AGREE] → follow the onscreen instructions
34
Conrm e-mail address →
[閉じる (Close)]
* If the conrmation screen
appears, check the content
and follow the onscreen
instructions.
The au-mailbox screen is
displayed.
■Changing your au-mail address
1 2 3 4
On the Home screen, [ ]
[ ] → [Change Address/
Setting Filter]
[Eメールアドレスの変更へ (To
change e-mail address)]
Enter the security
number → [送信 (Send)]
5 6 7 8
The conrmation screen of
changing E-mail address
appears, and conrm the
contents → [承諾する (I accept)]
Enter e-mail address →
[送信 (Send)]
[OK] [閉じる (Close)]
■Conrming your au-mail address
1 2 3
On the Home screen, [ ] [ ] → [E-mail information]
Your e-mail address appears in the E-mail address eld.
■Rejecting an incoming call
You can reject a call, by tapping
"End" during an incoming call.
When you reject a call, the caller is
informed that there is no response.
1
During an incoming
call, [End]
au-mailSettings