Life Fitness Lifecycle upright 9500HR User manual

Corporate Headquarters
10601 West Belmont Avenue
Franklin Park, Illinois 60131
U.S.A.
[phone] • FAX: [phone]
[phone] (Toll Free within the U.S. and Canada)
EUROPEAN OFFICES
Life Fitness Atlantic BV Life Fitness GmbH
Atlantic Headquarters Siemenstrasse 3
Columbusstraat 25 85716 Unterschleissheim
3165 AC Rotterdam GERMANY
THE NETHERLANDS Telephone: [phone]
Telephone: [phone] FAX: [phone]
FAX: [phone]
Life Fitness UK Ltd Life Fitness BeNeLux NV
Queen Adelaide Lambrechtshoekenlaan 309-311
Ely, Cambs CB7 4UB B-2170 Antwerpen-Merksem
UNITED KINGDOM BELGIUM
Telephone: [phone] Telephone: [phone]
FAX: [phone] FAX: [phone]
Life Fitness Italia S.R.L. Life Fitness Austria
Via, Elvas, 92 Schiesstattgasse 23
39042 Bressanone (BZ) A-2000 Stockerau
ITALY AUSTRIA
Telephone: [phone] Telephone: [phone]
FAX: [phone] FAX: [phone]
M051-00K46-A003
9/95

2

3
TABLE OF CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
How to Level the Lifecycle®9500HR Aerobic Trainer . . . . . . . . . . . . . . . . . . . . 7
How to Adjust the Seat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
How to Adjust the Footstraps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
The Display Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Heart Rate Zone Training™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
How To Use The Lifepulse Digital Heart Rate Sensors . . . . . . . . . . . . . . . . . . 14
How To Use The Heart Rate Zone Trainer Chest Strap . . . . . . . . . . . . . . . . . . 14
Operating Instructions & Program Descriptions. . . . . . . . . . . . . . . . . . . . . . . . 15
The Race Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
To Begin Any Lifecycle 9500HR Aerobic Workout . . . . . . . . . . . . . . . . . . . 17
Hill Profile Program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Heart Rate Check Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Random and Manual Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Random Program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Manual Program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Fat Burn and Cardio Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Fit Test Program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Fit Test Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Fit Test Scoring Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Optional Settings for the Lifecycle 9500HR Aerobic Trainer . . . . . . . . . . . . . . 26
Preventive Maintenance Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
How to Remove the Housing
on the Lifecycle 9500HR Aerobic Trainer. . . . . . . . . . . . . . . . . . . . . . . . . . 28
How to Solve Basic Operating Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Troubleshooting Your Zone Trainer®Chest Strap. . . . . . . . . . . . . . . . . . . . . . . 31
How to Obtain Product Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Lifecycle 9500HR Aerobic Trainer Specifications . . . . . . . . . . . . . . . . . . . . . . 33
©1996 Life Fitness. All rights reserved. The Life Fitness trademark is registered in the U.S. Patent and Trademark
Office, Certificate No. 1,400,502, issued July 8, 1986. Lifepulse and Heart Rate Zone Training are trademarks and
Lifecycle and Zone Trainer are registered trademarks of Life Fitness. Any use of these trademarks, without the express
written consent of Life Fitness is forbidden. U.S. Patent Numbers 3,767,195 and 4,358,105.

4

5
INTRODUCTION
Congratulations . . . and thank you for purchasing a Lifecycle®9500HR aerobic
trainer. Your new Life Fitness aerobic trainer is the most versatile exercise bike ever
developed. The culmination of over 20 years of Life Fitness research, technological
innovation and engineering expertise. Lifecycle exercise bikes are recognized the
world over as the most popular and advanced of computerized stationary bicycles.
Like other Life Fitness products, the Lifecycle 9500HR aerobic trainer offers you a
host of exclusive features designed to help you achieve your fitness goals faster and
with greater enjoyment. Industry-standard workout programs, an array of up-to-the-
second visual feedback, and the new Fat Burn and Cardio heart rate management
programs are just a few of the benefits you’ll enjoy on your Lifecycle 9500HR
aerobic trainer.
Why use a Life Fitness aerobic trainer? Aerobic training on a Lifecycle 9500HR
exercise bike is more than just a great workout. The Lifecycle 9500HR aerobic
trainer has a springless, padded seat and biomechanically superior position, including
variable-ergonomic handlebars which allow users a greater variety of body positions,
thus assuring a more comfortable workout.
The state-of-the-art wireless telemetry heart rate monitoring system makes the new
Cardio and Fat Burn programs the most effective workouts available on any aerobic
trainer. Or, if you prefer, you can still use the Lifepulse digital heart rate sensors.
And with features like the Race mode, Fit Test and level 0 resistance option that is
almost 25% easier than the level 1 found on earlier editions of the classic Lifecycle
aerobic trainer, you’ll be much more likely to stick with your exercise plan and
accomplish your goals.
If you have any questions regarding the operation of your Lifecycle 9500HR aero-
bic trainer, please call Life Fitness Customer Support Services at [phone]
or toll free within the U.S. and Canada at [phone]. For product service in
Europe, refer to the first page of this manual and contact your nearest Life Fitness
office.
CAUTION: Life Fitness STRONGLY recommends that if you are undertaking
an exercise program you see your physician for a complete medical exam,
particularly if you have a family history of high blood pressure or heart
disease, are over the age of 45, or if you smoke, have high cholesterol, are
obese, or have not exercised regularly in the past year.
If, at any time while exercising, you feel faint, dizzy, short of breath, or pain,
stop immediately.

6
SAFETY INSTRUCTIONS
R E M E M B E R:
S A F E T Y F I R S T !
•Always follow the console instructions for proper operation.
• Never operate a Life Fitness trainer if it has been dropped, damaged, or
even partially immersed in water. Contact Life Fitness After Market
Services.
• Never insert objects into any opening in your Lifecycle 9500HR aerobic
trainer. If an object should drop inside, carefully retrieve it; if you cannot
reach the item, contact Life Fitness Customer Support Services.
• Never place liquids of any type directly on the unit, except in an
accessory tray. Containers with lids are recommended.
• Do not use the Lifecycle 9500HR aerobic trainer outdoors.
• Do not use the Lifecycle 9500HR aerobic trainer in areas where aerosol
spray products are being used or where oxygen is being administered.
Such substances increase the danger of combustion and explosion.
• Keep all loose clothing, shoelaces, and towels away from the Lifecycle
9500HR exercise bike pedals.
• Keep the area around your Lifecycle 9500HR aerobic trainer clear of any
obstructions, including walls and furniture.
• Always be careful and exercise caution when mounting or dismounting
your Lifecycle 9500HR aerobic trainer. Use the handlebar whenever
additional stability is required.
• Wear shoes with rubber or high-traction soles. Do not use shoes with heels,
leather soles, cleats or spikes. Do not use the trainer in your bare feet.
•Do not tip the Lifecycle 9500HR aerobic trainer on its side during
operation.
NOTE: NEVER remove the stabilizer bar
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

7
HOW TO LEVEL THE LIFECYCLE 9500HR
AEROBIC TRAINER
Depending on the surface you place your Lifecycle 9500HR aerobic trainer on it
may need to be leveled. After you place the bike where you will be primarily using it,
check the stability of the bike by attempting to rock it back and forth. If it rocks, it
isn’t level. To level it, rotate the foot on the stabilizer bar that appears to be higher
counter-clockwise (as viewed from above) with your finger until the bike is level.
Leveling the Lifecycle 9500HR trainer

8
HOW TO ADJUST THE SEAT
A properly adjusted seat is extremely important in any bike-oriented exercise activity,
and the Lifecycle 9500HR aerobic trainer is no exception. If the seat is too low,
excessive strain will be placed on the knees and quadriceps muscles; if the seat is
too high, the resulting reaching action will irritate the feet, ankles, hips and knees.
To adjust the seat properly, sit on it and place the balls of your feet on the pedals.
An optimum position will allow you to move through the bottom of the stroke without
locking your knees or shifting in the seat (your knees should have a slight bend at
the point of fullest leg extension). If the seat needs to be adjusted, dismount the bike
and pull the spring-loaded adjusting pin located on the back of the seat post. Slide
the seat post up or down as necessary to the proper position and release the pin to
complete engagement. Check the seat height again and readjust it if necessary.
Adjusting the seat
CAUTION: Do not attempt to adjust the seat while you are pedaling
the bike. Doing so or failing to insert the seat pin completely may
result in an uncomfortable workout or cause injury.

9
HOW TO ADJUST THE FOOTSTRAPS
The pedals on your Lifecycle 9500HR aerobic trainer have nylon-reinforced rubber
footstraps with slits on both the inside and the outside of each strap. To adjust the
width of the straps, grasp the outside of the strap and pull down and away from the
knob. Once the slotted end is removed, choose a width that will feel the most com-
fortable while you are riding, reinsert the knob through the slot and pull the strap up.
The strap will click when it locks in place.
Adjusting the footstraps
CAUTION: Do not attempt to adjust the pedal footstraps while you
are pedaling the bike. Doing so may result in an uncomfortable
workout or cause injury.

THE DISPLAY CONSOLE
The Lifecycle 9500HR aerobic trainer’s display console is easy to use, and it allows
you to follow your progress as you ride. The on-board computer lets you tailor your
workouts to your individual fitness capabilities and goals while providing a unique
means of measuring your fitness improvement from one workout to the next.
A. MESSAGE CENTER:Provides all the instructions for programming the Lifecycle
9500HR trainer. In addition it displays elapsed time, level or heart rate, and
speed are constantly displayed. Total calories burned, distance traveled, calories
per hour, watts and (optionally) mets are alternately displayed every 5 seconds.
The alternating display can be locked on any one value by depressing the dis
play lock key.
B. DATA ENTRY ZONE:Allows you to enter information required to set-up a
workout or alter your current exercise program.
lSTART: The START key activates the display console once you begin pedaling
and is then inactive for the remainder of the workout.
lts KEYS: Use these keys to select all of your workout program parameters,
including length of time of your ride, age, weight, gender, target heart rate and
effort level. You can also increase or decrease your effort level at any time by
pressing either of the ts keys (or change your target heart if you are in the Fat
Burn or Cardio programs).
10
B
C
D
The Display Console
A

11
lENTER: Actually executes the input of any information you have keyed in. It is
not necessary to press ENTER when keying in a new effort level.
lNUMERIC KEYS: Use these keys to enter your riding time, level of difficulty
and Heart Rate or Fit Test data. You can select a workout duration from 1 to 99
minutes.You may also enter a different resistance level than your current level, a
different target heart rate for the Fat Burn and Cardio programs, or Fit Test data
such as age, gender or weight via the numeric keypad.
lCLEAR–PAUSE: Use this key during programming to clear an erroneous
value.Use this key to put your workout program on hold or restart it. To put your
workout on hold, press the key once and continue pedaling (remember, you are
powering the machine; if you stop pedaling, all power is lost and the display will
go blank). Pedal resistance drops to the minimum when the Lifecycle 9500HR
aerobic trainer is paused and the stopwatch function is activated and the
elapsed time window begins counting up from zero. Use this as a brief rest
period if you feel fatigued or to take your heart rate.
lDISPLAY LOCK: This button allows you to freeze the message center display-
on one set of feedback information - Total Calories,Calories/hour, miles
(kilometer), watts, etc. To unlock the display, simply push the DISPLAY LOCK
button again.
lRACE ON / OFF: Lets you toggle into and out of the Race mode at any time in
the Hill, Random and Manual programs. The Speed / RPM display will toggle
between RPMs and MPH / KPH every five seconds. Your MPH will be depen-
dent on your pedal speed and the level chosen. See the Race Option inset later
in this manual.
lWATTS / METS:To display WATTS (roughly equal to 1/4 of calories per hour),
press the WATTS/METS key anytime during a program. During the Manua
program, if you wish to enter a WATTS workload to maintain, press the ts keys
while the WATTS value is being displayed.
To display METS (a measurement of oxygen consumption per unit of body eight),
press WATTS/METS key twice.Next, key in your weight using the ts keys or the
numeric keypad and press ENTER. During the Manual program, if you wish to enter
a METS workload to maintain, enter that value using the ts keys or the numeric key-
pad (followed by the ENTER key) while the METS value is being displayed.
Pressing the DISPLAY LOCK button while the WATTS or METS value is displayed
will lock this value in the right-hand, side display.

12
C. PROGRAM PROFILE WINDOW:Displays a matrix of lights showing your present
position and upcoming terrain. The higher the column of lights the greater the
resistance. The left-most column of lights represents your current position. The
remaining columns show the upcoming terrain. As your workout progresses, the
lights move across the screen from right to left.
In the Fat Burn and Cardio programs, a heart shape (ª)will be displayed in the
window when you are required to grasp the Lifepulse sensors (only if you are not
wearing a heart rate monitor chest strap; if you are wearing one, your heart rate is
detected automatically). A flashing heart will also appear at the conclusion of the
Fit Test, again prompting you to grasp the Lifepulse sensors (only if you are not
wearing a heart rate monitor chest strap .
D. QUICK START INSTRUCTIONS: Tells you how to get right into a workout on
your Lifecycle 9500HR exercise bike. Just press start and enter an effort level!

13
HEART RATE ZONE TRAINING™
Research shows that exercising within a specific heart rate range is the optimal way
to both monitor your exercise intensity and achieve maximum results. That’s the idea
behind the Life Fitness Heart Rate Zone Training approach to exercise.
If your primary goal is to burn fat, you should exercise at a level between 60% and
75% of your theoretical maximum heart rate (defined by the American College of
Sports Medicine’s “Guidelines for Exercise Testing and Prescription” as 220 minus
your age). If you wish to improve your cardiovascular condition, you should work out
at 75% to 85% of your theoretical maximum heart rate.
Example: If you are 30 years old, your theoretical maximum heart rate is
220 - 30 (your age) = 190 beats per minute (bpm).
If your primary goal is to burn fat:
Multiply 190 x .60 = 114 bpm (the low end of your target heart rate zone)
Multiply 190 x .75 = 143 bpm (the high end of your target heart rate zone)
If your primary goal is to improve your cardiovascular fitness:
Multiply 190 x .75 = 143 bpm (the low end of your target heart rate zone)
Multiply 190 x .85 = 162 bpm (the high end of your target heart rate zone)
Heart Rate Zone Training chart

14
HOW TO USE THE LIFEPULSE DIGITAL HEART RATE SENSORS
The patented Lifepulse digital heart rate sensors are the default heart rate monitoring
system on the Lifecycle 9500HR exercise bike. To use the Lifepulse sensors, sim-
ply grasp the stainless steel sensors in the handlebars when the display console
prompts you to do so or anytime you wish to check your heart rate. There are four
sensors, two on each side of the handlebar, and you must make contact with all four
to obtain your heart rate. The console will display your ECG-accurate heart rate in
10 to 30 seconds.
HOW TO USE THE HEART RATE ZONE TRAINER CHEST STRAP
Wet the electrodes of the transmitter (the two grooved surfaces on the underside of
the strap) and secure the strap as high under the chest muscles as possible. The
strap should be snug, but comfortable enough to allow for normal breathing.
The transmitter strap will deliver an opti-
mum heart rate reading when the elec-
trodes are directly in contact with bare skin.
It will also, however, function properly
through wet, lightweight
clothing. The key is for
the electrodes to remain
wet so that they can con-
duct the electrical impuls-
es of the heart back to the
receiver.
If it becomes necessary to remoist-
en the chest strap transmitter, grasp the
center of the strap, pull it away from the
chest to expose the two electrodes, then moisten them in this position.
Zone Trainer chest strap transmitter

15
OPERATING INSTRUCTIONS
& PROGRAM DESCRIPTIONS
Selecting a workout program on your Life Fitness aerobic trainer is easy. Six com-
puterized aerobic workouts, including the exclusiveFat Burn, Cardio and Fit Test
programs, are pre-programmed on your Lifecycle 9500HR aerobic trainer:
FAT BURN HILL MANUAL METS
CARDIO RANDOM WATTS FIT TEST
FAT BURN is a Heart Rate Zone Training™program designed to burn an optimum
amount of calories from fat by automatically maintaining a target heart rate of 65%
of your theoretical maximum heart rate.
CARDIO is a Heart Rate Zone Training™program designed to increase cardiovascu-
lar fitness by automatically maintain a target heart rate of 80% of your theoretical
maximum heart rate.
HILL is an interval training workout consisting of a warm-up period followed by a
plateau of constant effort, progressively more difficult levels of effort – or hills –
separated by periods of recovery – or valleys – and a cool-down period.
RANDOM is a program of varying effort levels which occur randomly with each
exercise session, resulting in more than one million workout combinations.
MANUAL maintains aconstanteffort level based on goals thatyou select.
WATTS is a manual program which allows the user to set the workload difficulty in
WATTS.
METS is a manual program which allows the user to set the workload difficulty in
METS.
FIT TEST is a way of measuring your aerobic fitness level compared to others of
the same age and gender.

16
The Race Option
Formerly a program in and of itself, the Race mode now allows you to vary
your pedal resistance to simulate the feel of an actual 12-speed racing bike
in the Hill, Random and Manual programs. Turn the Race mode on at any time
and the Lifecycle 9500HR aerobic trainer’s 12 effort levels are transformed
into the “gears” of a high performance road racing bicycle! The pedal resis-
tance will change with the speed at which you pedal, enhancing your work-
out enjoyment while also allowing you greater control over the program’s
intensity (the greater the resistance, the more LEDs will be illuminated). The
distance you travel and the calories you burn during your workout will also
vary with your pedal speed.
The Lifecycle 9500HR aerobic trainer is a “constant work” machine; in the Hill,
Random and Manual programs, pedal resistance automatically compensates for
changes in RPM. In other words, the slower you pedal, the greater the resistance;
conversely, the faster you pedal the less resistance you feel*. The distance you trav-
el will remain the same; pedaling faster will not bring you to the end of a program
sooner nor burn more calories, assuring you of a consistent workout. If you prefer to
be “rewarded” for going faster, try the new Race mode option.
NOTE: Mileage readings are arbitrary and should not be used to compare workouts
in different programs. Total calories burned is the best measure of the amount of work
performed in any given workout.
*This is true as long as you pedal faster than 65 RPM. Below 65 RPM, the resistance will drop off to the point where you
can continue pedaling at a pace sufficient to maintain power to the console.

REMEMBER – YOU CAN CHANGE EFFORT LEVELS AT ANY TIME
DURING YOUR WORKOUT*BY SIMPLY KEYING IN ANEW LEVEL
ON THE KEYPAD OR THE ARROWS!
17
TOBEGIN ANY LIFECYCLE 9500HR
AEROBIC TRAINER WORKOUT:
lFirst adjust the seat position and make certain the seat pin is properly locked and
the bike is level.
lBegin pedaling and press the START key.
lSelect a workout program by pressing the ts keys until the program you want
appears in the message center and then press ENTER (or wait 10 seconds and
your selection will be automatically entered).
lYou can “Quick Start” a Manual program workout without selecting a program.
To do so, just begin pedaling, press START, and input an effort level between 0
(easiest) and 12 (most difficult).
*Except in the Fat Burn and Cardio programs, in which you may change your target heart rate.
HILL RANDOM MANUAL OR FIT TEST
0 0 0
3-4 2-3 1
6-7 5-6 2
8-9 6-7 3
9-10 7-8 4
12 9-10 5
11 6
12 7
11 8
12 9
10
11
12
Effort level equivalency table

18
HILL PROGRAM
lAfter selecting a Hill workout, you will be asked to enter your desired workout
time in minutes. Use the numeric keypad to input a number from 1-99 minutes
(or the maximum time preprogrammed on unit) and press ENTER.
lOnce you have selected the duration of your Hill workout the program will begin.
Just choose an effort level between 0 (easiest) and 12 (hardest).
The Lifecycle 9500HR aerobic trainer’s patented Hill program offers the ideal con-
figuration for interval training: periods of intense aerobic activity separated by regu-
lar intervals of lower-intensity exercise. Interval training programs have been scientifi-
cally demonstrated to yield greater cardiorespiratory improvement than steady-pace
training.
Not only does the Hill program offer the challenge of alternating periods of high and
low intensity, but the levels of intensity become progressively more difficult during
the course of the program. Because you have the option of working out in a Hill pro-
gram for anywhere from 1 to 99 minutes, and because the Hill program is com-
posed of four distinct phases, the program must be structured differently to accom-
modate the entire array of program durations. Longer workouts add more hills.
Each Hill program session comprises the following phases:
(1) Warm-up, (2) Plateau, (3) Interval Training, and (4) Cool-down.
lWarm-up: Gradually brings your heart rate into the lower portion of your target
heart rate zone, increasing respiration and blood flow to working muscles.
lPlateau: Brings your heart rate into your target zone. Check your heart rate at the
end of the plateau period to ensure that you have entered your target heart rate
zone.
lInterval Training: A series of hills and valleys. During this portion of your work-
out, you will be confronted with sets of four successively steeper hills, each
separated from the next by a valley, or recovery period. Check your heart rate at
the end of the interval training period to ensure that you have stayed within your
target zone.
lCool-down: The cool-down allows your body to begin removing accumulated
by-products of exercise, such as lactic acid, which build up in muscles during
your workout and contribute to muscle soreness.

19
The Hill diagram below shows the effort level and recovery periods encountered
during a Hill workout. Effort and recovery periods are simulated on the display con-
sole by columns of lights in the Program Profile window. The columns move from
right to left during the workout. The higher the column, the higher the incline; conse-
quently, you must increase your effort.
HEART RATE CHECK POINTS:
For Fat Burning:
4First Heart Rate Check Point — Your heart rate should be between 60%
and 70% of the theoretical maximum heart rate for your age category.
4Second Heart Rate Check Point — Your heart rate should be between 70%
and 75% of the theoretical maximum heart rate for your age category.
For Cardio:
4First Heart Rate Check Point — Your heart rate should be between 75%
and 80% of the theoretical maximum for your age category.
4Second Heart Rate Check Point — Your heart rate should be between
80% and 85% of the theoretical maximum for your age category.
If you are not wearing a Zone Trainer heart rate monitor chest strap, be sure to
check your heart rate near the end of the plateau and interval training periods
using the Lifepulse Sensors (see Hill diagram on previous page). You should
always take your heart rate at the times indicated to make sure you are staying
within your target heart rate zone.

20
RANDOM AND MANUAL PROGRAMS
lOnce you have selected either the Random or Manual program your workout will
begin. All you need to do is choose an effort level between 0 (easiest) and 12
(hardest).
Random Program
The computer randomly selects hill and valley terrain which varies with each and
every workout, resulting in more than one million combinations. Because resistance
levels are greater in this program than in the Hill program, it is recommended that
the Random program be set one or two levels lower than the level of intensity you
would normally select on the Hill program.
Manual Program
The Manual program provides steady-pace exercise equal to that of the highest hill
encountered on the Hill program at the same level of effort (except at level 0, when
the resistance equals that of the lowest valley). Because of the greater resistance
levels of this program, it is recommended that you set the Manual program about
two to three levels lower than the level of effort that you would normally select on
the Hill program.
You can design your own interval training program using the Manual program by
varying the level of effort during the course of your workout. To do so, select a high
level of resistance until you reach the upper end of your target heart rate zone, then
ride at a lower effort level until your heart rate drops to the bottom of your target
zone. Then increase the level of effort again until you are back to the upper portion
of your target zone. By repeating this process, you will actually be creating your own
hills and valleys.
FAT BURN AND CARDIO PROGRAMS
lEnter your age using the numeric keypad to receive your computed target heart
rate. Press ENTER to accept the calculated target or input your own target heart
rate using the keypad and press ENTER.