Life Fitness Club Series User manual

PLEASE USE THESE INSTRUCTIONS FOR THEASSEMBLYOFTHE SHROUD KITS
CLUB SERIES SHROUD KIT
(SEATED ROW)
Part # 7028301
RevA. Revision:12/18/001
ASSEMBLY INSTRUCTIONS

2
Tools Required forAssembly
* 9/16” wrench or rachet
with 9/16” socket
* 7/32”Allen wrench
PARTS LIST
PART #
70257
69220
70256
69252
3202408
KEY
1
2
3
4
5
QTY
1
1
1
1
10
KEY
6
7
8
9
PART #
3228501
3221501
3202401
68619
DESCRIPTION
3/8” SAE BLK WASHER
3/8”ACORN NUT
3/8 X 1” BUTTON HEAD BOLT
TOP SHROUD
QTY
22
10
2
1
DESCRIPTION
FRONTPARTIALSHROUD
REARPARTIALSHROUD
FRONT FULL SHROUD
REAR FULL SHROUD
3/8 X 3-3/4” BUTTON HEAD BOLT
TOP SHROUD ASSEMBLY
• SECURELY assemble the TOP SHROUD (9) to the TOWER using two 3/8 X 1” BUTTON HEAD BOLTS (8) and two 3/8” SAE
BLK WASHERS (6) as shown .
TOWER
9
3/8 X 1” BUTTON HEAD (2X) 8
(2X) 6

3
FULL SHROUD ASSEMBLY
• (NOTE: CABLE must be unassembled before FULL FRONT SHROUD can be assembled.)
5 3/8 X 3-3/4” (8X)
3
6 (8X)
TOWER
7 (8X)
6 (8X)
4
• SECURELYassemble the FRONT FULL SHROUD (3) and the REAR FULLSHROUD (4) to the TOWER using eight 3/8 X 3-3/4”
BUTTON HEAD BOLTS (5), sixteen 3/8” SAE BLK WASHERS (6) and eight 3/8”ACORN NUTS (7) as shown above.
• PLEASERETURNTOTHEPRODUCTASSEMBLYINSTRUCTIONS FORFURTHERINFORMATION.

4
PARTIALSHROUDASSEMBLY
• SECURELY assemble the FRONT PARTIAL SHROUD (1) and the REAR PARTIAL SHROUD (2) to the TOWER using ten 3/8 X
3-3/4” BUTTON HEAD BOLTS (5), twenty 3/8” SAE BLK WASHERS (6) and ten 3/8”ACORN NUTS (7) as shown above.
5 3/8 X 3-3/4”
(10X)
1
6 (10X)
TOWER
7 (10X)
6 (10X)
2
• PLEASERETURNTOTHEPRODUCTASSEMBLYINSTRUCTIONS FORFURTHERINFORMATION.