Life Fitness SL55 User manual

1
Rev. 08/01/05
SELECTORIZED STRENGTH TRAINING EQUIPMENT
SL55 HIP ADDUCTOR
Weight Stack (190 lbs)
AK50-WS002-0000
Black Pad Set
SL55-FEA02-0P01
Seat Pad
0K50-4S055-0000
Back Pad
0K50-4S011-0000
Knee Pad, Left
0K50-4S049-0000
Knee Pad, Right
0K50-4S048-0000
Wear Cover
0K50-4E008-0000
Black Cap (11)
0017-00042-0969
Lanyard Cord
0017-00009-0938
Selector Pin
(see note on next page)
SK50-S0151-0000
Weight Stack Shield
0K50-E0008-0000
Decal
M0-00335-A000
Shield Trim (29”)
0017-00042-0989
5 LBS Add On Weight
050-P0312-0000
Guide Rods
0017-00009-0933
Note: Get length from
Customer
Placard
SL55-PL000-0001
Metal Label (2)
0K50-01001-0000
Pillow Block (4)
0017-00006-0203
Pulley (4)
0017-00009-0977
Warning Label
M051-00260-A000
Weight Stickers
M051-00262-A000 (15-300 lbs)
M051-00265-A000 (7-140 KG)
Weight Donut (2)
0017-00042-993
Cable (2)
AK50-CL026-0804
Cable Retainer Kit
SK50-S0038-0000B
SK50-S0038-0000W
Master Link
0017-00009-0965
Pull Pin Kit
SK50-S0007-0000
Cable
AK50-CL085-0001
Grip Cap (2)
0K50-P0315-2000
Rubber Grip (1” ID)
0017-00042-0995
Grip Ring (3)
0K50-P0316-2000
Red Grip Cap (1)
0K50-P0315-2100
Cable
AK50-CL060-1402
Rubber Grip
0017-00042-0996
Grip Cap (2)
0K50-P0315-4000
Foot Pad 4-3x4
0017-00042-1019
Set Screw
0017-00101-1406
Release Handle
SK50-S0116-0000
Left Leg Weldment
SL55-S0003-0000
Left Upholstery Pad
0K50-US048-0000
Right Leg Weldment w/Cam
SL55-S0004-0000
Right Upholstery Pad
0K50-US049-0000
Cam Number Strip
M051-00273-A000
Floating pulley
housing behind
weight stack
AK50-S0007-0000
Selector cam
on bottom
SL55-S0001-0000

2
Rev. 08/01/05
SELECTORIZED STRENGTH TRAINING EQUIPMENT
SL55 HIP ADDUCTOR
Sk50
-
s0013
-
0000
Should only be used on older
units where the top plate on
the weight stack contains no
holes. This kit consists of pin,
lanyard attachment and
plastic eye loop. The plastic
eye loop fits over the Bayonet.
The old style pin which was
made of plastic is going to be
upgraded with a rubber tulip
head pin, but will still work with
this kit.
0K50-A1102-0000
Fits only on newer units. Top
plate on weight stack has an
extra hole to accommodate
the pin assembly. Push the
end of the lanyard into the
hole on the top plate. This style
is currently being used on all
9000 strength series and MTS
Hammer Units.

Bottom Cable: AK50-CL085-0001
Top Cable: AK50-CL060-1402
Figure 8 Cables: AK50-CL026-0804 (Qty. 2)
SL55 Cable Routing