Life Span SP-460 M2 User manual

NOTE:
Product may vary slightly from the item pictured due to model upgrades. This manual may be subject to updates or changes.
Up to date manuals are available through our website at www.lifespanfitness.com.au
Read all instructions carefully before using this product.
Retain this owner’s manual for future reference.
IMPORTANT
All nuts and bolts are to be checked and tightened on a regular basis. This includes pedals and
other moving parts. Failure to do so may cause damage to your threads and void your warranty.
SP-460 M2 Spin Bike
USER MANUAL

2
TABLE OF
CONTENTS
I. Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 03
II. Care Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04
III. Exploded Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05
IV. Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06
V. Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08
VI. Seat and Handlebar Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
VII. Computer Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
VIII. Exercise Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
IX. Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
X. Hand Pulse Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
| TABLE OF CONTENTS

3IMPORTANT SAFETY INSTRUCTIONS |
I. IMPORTANT SAFETY
INSTRUCTIONS
WARNING: Read all instructions before using this machine.
It is important your machine receives regular maintenance to prolong its useful life. Failing to
regularly maintain your machine may void your warranty.
Please always keep this manual with you.
•It is important to read this entire manual before assembling and using the equipment. Safe and
effective use can only be achieved if the equipment is assembled, maintained, and used properly.
PLEASE NOTE: It is your responsibility to ensure that all users of the equipment are informed of all
warnings and precautions
•Before starting any exercise program, you should consult your doctor to determine if you have any
medical or physical conditions that could put your health and safety at risk, or prevent you from
using the equipment properly. Your doctor’s advice is essential if you are taking medication that
affects your heart rate, blood pressure or cholesterol level.
•Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop
exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular
heartbeat, and extreme shortness of breath, lightheadedness, dizziness, or feelings of nausea. If you
do experience any of these symptoms, you should consult your doctor before continuing with your
exercise program.
•Keep children and pets away from the equipment. This equipment is designed for adult use only.
•Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet.
To ensure safety, the equipment should have at least 2 meters of free space around it.
•Before using the equipment, check that the nuts and bolts are securely tightened. If you hear any
unusual noises coming from the equipment during use and assembly, stop immediately. Do not use
the equipment until the problem has been rectified.
•Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may get caught
vin the equipment or that may restrict or prevent movement.
•This equipment is designed for indoor and family use only.
•Care must be taken when lifting or moving the equipment so as not to injure your back.
•Always keep this instruction manual and assembly tools at hand for reference.

4
•The equipment is not suitable for therapeutic use.
•The pulse or heart rate sensors are not medical devices. Various factors, including the user’s
movement, may affect the accuracy of heart rate readings. The pulse sensors are intended only as
exercise aids in determining heart rate trends in general.
| CARE INSTRUCTIONS
•Batteries are to be installed or replaced by adult only.
•Do not use rechargeable batteries. Do not mix
different battery types. Do not mix old and new
batteries. Do not mix alkaline, standard (Carbon-
Zinc), or rechargeable (Nickel-Cadmium) batteries.
•Remove batteries when product is not in use.
•Remove exhausted batteries from product and
dispose of in accordance with the
manufacturer’s recommendation.
•Do not attempt to recharge non-rechargeable
batteries.
•Batteries are to be inserted with correct polarity.
•The supply terminals are not to be short-circuited.
•Do not dispose of batteries in fire, batteries may
explode or leak.
BATTERY USAGE
II. CARE INSTRUCTIONS
a. All nuts and bolts are to be checked and tightened on a regular basis. This includes pedals and other
moving parts. Failure to do so may cause damage to your thread and void your warranty.
b. Lubricate moving joints with grease after periods of usage.
c. Be careful not to damage plastic or metal parts of the machine with heavy or sharp objects.
d. The machine can be kept clean by wiping it down using dry cloth.
e. Flywheels must be lubricated after certain periods of use to keep the bike running smooth and
reduce vibration noise.
IMPORTANT

5EXPLODED DIAGRAM |
III. EXPLODED DIAGRAM
13
12
11
7
10
21
21
29 28
1L 33 34 66 37 47 16
6 5
24
14 3
14
2
49
35 48 46
51
1R
44
41
28 29
42
41
0
43
45
50
14
15
3
14
2
55
56
31
31
56
55
6 5
78
41
73
72
2
53
5463 54 38 39
67 58 59
60
76
40 61
32 962 60 58
40
39 38
52
37
36
731
30
27
24
26
25
8
7
77
42
41
69
71
68
41
17 78 42
65 23 18
64
19
19
20
57 75
57
64
74
42
65
23
22
70
41

6| PARTS LIST
IV. PARTS LIST
No. Name Spec. Quantity Unit
1 Pedal JD-301 (9/16") 1 pcs
2 End Cap 60*30*1.5 5 pcs
3 Carriage Bolt 8*42 4 pcs
4 Rear Stabilizer Wedling 1 pcs
5 Flat Washer 8 4 pcs
6 Domed Nut M8 4 pcs
7 Spring Adjustment Knob φ57*62 (M16*1.5) 3 pcs
8 Plastic Sleeve 53.5*23.5*1.5/60*30*1.5 1 pcs
9 Lock Nut M33*1*4 2 pcs
10 Vertical Seat Post Wedling 1 pcs
11 End Cap 53.5*23.5*1.5 1 pcs
12 Seat Post Wedling 1 pcs
13 Seat C-3604T/NT-189 1 pcs
14 Stopper φ38*43/(M8X25) 4 pcs
15 Front Stabilizer Wedling 1 pcs
16 Main Frame Wedling 1 pcs
17 Handlebar Post Wedling 1 pcs
18 Handle Bar Wedling 1 pcs
19 Spring Washer 8 4 pcs
20 Bolt M8*15 4 pcs
21 Bushing φ40*65 2 pcs
79 Pulse Sensor match Φ25 tube 1 pcs
80 Pulse Sensor Line L=700 1 pcs
24 Brake Knob 112*32*7 1 pcs
25 Adjustment Knob φ58*74 1 pcs
26 Little Plastic Ring 14*8*9 1 pcs
27 Plastic Ring φ20*φ9*3 1 pcs
28 Fixing Nut M10*1.25 2 pcs
29 Crack End Cap φ23*7.5 2 pcs
30 Sheet Iron δ5 1 pcs
31 Lock Nut M8 3 pcs
32 Chain Wheel A7K-16 1/2"*1/8" 16T 1 pcs
33 Left Crank 170*43 1 pcs
34 Crank Cover φ45*28 1 pcs
35 Bearing 6203ZZ 2 pcs
36 Domed Nut M6 1 pcs
37 U Bracket δ2.5 1 pcs
38 Fixing Nut M10*1.0 2 pcs
39 Fixing Bolt M6*55 2 pcs
40 Nut M6 2 pcs

7PARTS LIST |
No. Name Spec. Quantity Unit
41 Screw ST4.2X19 7 pcs
42 Screw ST4.2X16 5 pcs
43 Screw ST4.2X13 2 pcs
44 Outer Chain Cover 636*265*40 1 pcs
45 Little Chain Cover 108*37*3.5 1 pcs
46 Axis φ20*137 1 pcs
47 Long Fixing Tube φ22*φ17.5*36 1 pcs
48 Short Fixing Tube φ22*φ17.5*11 1 pcs
49 Inner Chain Cover 451*262*32 1 pcs
50 Chain 12.7/106 1 pcs
51 Right Crank 170*48 1 pcs
52 Brake 130mm 1 pcs
53 Special Bolt M6*75 1 pcs
54 Brake Plastic 85*43*13 2 pcs
55 Bolt M8*40 2 pcs
56 Wheel φ50*23 2 pcs
81 Screw M5*12 4 pcs
58 Fixing Nut M10*1.0 2 pcs
59 Fixing Tube φ13.6*φ10.3*35 1 pcs
60 Bearing 6000ZZ 2 pcs
61 Flywheel φ453*27 (17.5KG) 1 pcs
62 Flywheel Shaft φ10*147 1 pcs
63 Woolly Block 85*40*6 2 pcs
64 End Cap φ25*1.5 2 pcs
65 Foam Grip φ23*φ33*465 2 pcs
66 Fixing Nut φ28*M20*1 1 pcs
67 Flywheel Cover φ59*35 1 pcs
68 Screw ST2.9*9.5 1 pcs
69 Left Protect Cover 157*73*157 1 pcs
70 Handlebar Cover 115*89*75 1 pcs
71 Right Protect Vover 156*80*174 1 pcs
72 Sensor SR-202 1 pcs
73 Sensor Holder LTF8163 1 pcs
74 Computer Holder δ2.5 1 pcs
75 Computer X-3541 1 pcs
76 Magnetic LT-310 1 pcs
77 Magnet φ15*7, LT-310 1 pcs
78 Plastic Plug φ14*14 (φ12) 3 pcs

8
V. ASSEMBLY INSTRUCTIONS
1. Remove the bolts and nut from the
bottom tube, then attach the Front
Stabilizer (pt.15) to the Main Frame
(pt.16) using two sets of Ø8 Flat
Washers (pt.5), M8 Domed Nut (pt.6)
and M8*45 Carriage bolt (3).
2. Attach the Rear Stabilizer (pt.4) to the
Main Frame (pt.16) using two sets of Ø8
Flat Washers (pt.5), M8 Domed Nut
(pt.6) and M8*45 Carriage bolt (3).
FIG 1
1. Slide the Vertical Seat Post (pt.10) into the
seat post housing on the main frame
(pt.16). Then slide the Seat Post (pt.12) into
the Vertical Seat Post (pt.10). You will have
to slacken the knurled section of the
Spring Adjustment Knob (pt.7) and pull the
knob back and then select and align
holes for the desired height. Release
the knob and retighten the knurled
portion.
2. Now fix the Seat (pt.13) to the Vertical
Seat Post (pt.12) as shown and tighten the
bolts around the screws under the seat.
FIG 2
4
1. PREPARATION
A. Before assembling make sure that you will have enough space around the item.
B. Use the present tooling for assembling.
C. Before assembling please check whether all needed parts are available (at the above of this
instruction sheet you will find an explosion drawing with all single parts (marked with numbers)
which this item consists of.
2. ASSEMBLY INSTRUCTION
3
6
5
16 6
515
3
13
12
7
7
10
16
| ASSEMBLY INSTRUCTIONS

9
ATTENTION:
Connected with the computer line, to
Gap(A1) corresponding to the Convex
Point (A2) to insert link.
1. Slide the Handlebar Post (pt.17) into the handlebar post housing on the main frame. You will have to
slacken the knurled section of the Spring Adjustment Knob (pt.7) and pull the knob back and then
select and align holes for the desired height. Release the knob and retighten the knurled portion.
2. Then fix the Handlebar (pt.18) and the Computer Holder (pt.74) with two sets of Ø8 the Spring Washer
(pt.19) and M8*15 the Bolt (pt.20).
FIG 3
ATTENTION: YOU SHOULD FIX THE HANDLEBAR TIGHTLY.
16
A2
Gap
A1
Convex point
3. Slide the Computer (pt.75) onto the Computer Holder (pt.74) by connecting the plug (A1 & A2).
A2
17
18
19
19
20
74
A1
57 75
57
ASSEMBLY INSTRUCTIONS |

10
1. The Pedals (pt.1 L & pt.1 R) are marked "L" and "R" - Left and Right. Connect them to their appropriate
crank arms. The right crank arm is on the right- hand side of the cycle as you sit on it.
FIG 4
A. Adjust the resistance:
To increase resistance (requiring more
strength to pedal), turn the Resistance
Control Knob (pt.25) to the right.
To decrease resistance (requiring less
strength to pedal), turn the Resistance
Control Knob (pt.25) to the left.
FIG A
B. The Emergency Brake Function:
The Emergency Brake & Resistance Control
Knob can be used as the Emergency Brake.
When you want the flywheel to stop turning,
you must firmly press down the Emergency
Brake (pt.24).
A B
1L
25 24
IMPORTANT: The Right pedal should be threaded on clockwise and the Left pedal anticlockwise.
Ensure to fully tighten both pedals as loose pedals will cause damage to the thread and this
will affect your warranty.
16
1R
FIG B
| ASSEMBLY INSTRUCTIONS