Life Span ROWER-960 User manual

NOTE:
This manual should not be used to guide your purchasing decision. Your product, and the contents inside its carton, may vary
from what is listed in this manual. This manual may also be subject to updates or changes. Updated manuals are available
through our website at www.lifespanfitness.com.au
Read all instructions carefully before using this product.
Retain this owner’s manual for future reference.
IMPORTANT
All nuts and bolts are to be checked and tightened on a regular basis. This includes pedals and
other moving parts. Failure to do so may cause damage to your threads and void your warranty.
ROWER-960
USER MANUAL

2
TABLE OF
CONTENTS
I. Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 03
II. Care Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04
III. Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05
IV. Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 07
V. Computer Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08
VI. Exercise Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
VII. Water Care Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
VIII. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
IX. Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
| TABLE OF CONTENTS

3IMPORTANT SAFETY INSTRUCTIONS |
I. IMPORTANT SAFETY
INSTRUCTIONS
WARNING: Read all instructions before using this machine.
It is important your machine receives regular maintenance to prolong its useful life. Failing to
regularly maintain your machine may void your warranty.
Please keep this manual with you at all times.
•It is important to read this entire manual before assembling and using the equipment. Safe and
effective use can only be achieved if the equipment is assembled, maintained and used properly.
PLEASE NOTE: It is your responsibility to ensure that all users of the equipment are informed of all
warnings and precautions.
•Before starting any exercise program you should consult your doctor to determine if you have any
medical or physical conditions that could put your health and safety at risk, or prevent you from
using the equipment properly. Your doctor’s advice is essential if you are taking medication that
affects your heart rate, blood pressure or cholesterol level.
•Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop
exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular
heartbeat, and extreme shortness of breath, lightheadedness, dizziness or feelings of nausea. If you
do experience any of these symptoms, you should consult your doctor before continuing with your
exercise program.
•Keep children and pets away from the equipment. This equipment is designed for adult use only.
•Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet.
To ensure safety, the equipment should have at least 2 meters of free space around it.
•Before using the equipment, check that the nuts and bolts are securely tightened. If you hear any
unusual noises coming from the equipment during use and assembly, stop immediately. Do not use
the equipment until the problem has been rectified.
•Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may get caught
in the equipment or that may restrict or prevent movement.
•This equipment is designed for indoor and family use only.
•Care must be taken when lifting or moving the equipment so as not to injure your back.

4| IMPORTANT SAFETY INSTRUCTIONS
II. CARE INSTRUCTIONS
•Lubricate moving joints with grease after periods of usage.
•Be careful not to damage plastic or metal parts of the machine with heavy or sharp objects.
•The machine can be kept clean by wiping it down using dry cloth.
•All nuts and bolts are to be checked and tightened on a regular basis. This includes pedals and other
moving parts. Failure to do so may cause damage to your thread and void your warranty.
•Always keep this instruction manual and assembly tools at hand for reference.
•The equipment is not suitable for therapeutic use.
•The pulse or heart rate sensors are not medical devices. Various factors, including the user’s
movement, may affect the accuracy of heart rate readings. The pulse sensors are intended only as
exercise aids in determining heart rate trends in general.
•Batteries are to be installed or replaced by adult only.
•Do not use rechargeable batteries. Do not mix
different battery types. Do not mix old and new
batteries. Do not mix alkaline, standard (Carbon-
Zinc), or rechargeable (Nickel-Cadmium) batteries.
•Remove batteries when product is not in use.
•Remove exhausted batteries from product and
dispose of in accordance with the
manufacturer’s recommendation.
•Do not attempt to recharge non-rechargeable
batteries.
•Batteries are to be inserted with correct polarity.
•The supply terminals are not to be short-circuited.
•Do not dispose of batteries in fire, batteries may
explode or leak.
BATTERY USAGE

5ASSEMBLY INSTRUCTIONS |
III. ASSEMBLY INSTRUCTIONS
ACCESSORIES LIST
1
2 3
5
Rowing Machine
Electric Pump User’s Manual
Aqua Blue
USER’ S
MANUAL
4Phone Holder

6| ASSEMBLY INSTRUCTIONS
FOLDING & UNFOLDING INSTRUCTIONS
Unfold the rower and fill the tank to your desired resistance level. Note that there is a maximum water
line.
When not in use. siphon out the water and fold the rail up.
You can also fold this up for temporary storage space with water still inside.
The item comes pre-assembled in the box and only requires unfolding to use.

7OPERATION |
IV. OPERATION
1. Add water for more resistance: Open the cap for the tank and pour water inside.
2. Remove water for less resistance: Use the electric siphon to take the water of the tank.
3. Add the full contents of Aqua Blue to the tank to help keep the water clean.
1. Press the ON/OFF button to start or stop the siphon.
1. The battery voltage is 5V, it can pump 18L of barreled water for 3 times once fully charged.
2. The electric siphon is lower-voltage and explosion-proof control for safety precaution.
3. When the supply current of the product is lower than 3.2A, a red warning light will flash.
Please turn off the siphon and charge.
4. When the battery is fully charged, the green light will appear.
1. Please carefully read the manual before using the product.
2. Please connect one side of the plastic tube to the pump intake underneath the product and stick
the other side into the barreled water before using.
3. Please charge it fully after using or if not used for quite a long time.
4. Please clean the plastic tube periodically or replace it once a month to keep healthy.
1. Please unplug the power supply and store it out of the sun in cool dry condition after cleaning it,
when it is not in use.
2. Please prevent the water getting into the electrical parts and do not clean it in water. Use a soft,
damp cloth to eliminate dirt and dust.
How to Use
Electric Siphon Operation
A. POWER-ON
B. CHARGING
C. USING
D. CLEANING AND MAINTAINING

8
V. COMPUTER DISPLAY
| COMPUTER DISPLAY
2. KEY FUNCTION
1. DISPLAY
UP To select the gender and increase the time, distance, calorie, age, weight, and
height equivalent. Set the clock and alarm clock in the clock mode.
DOWN
To select gender, decreasing time, distance, calorie, age, weight, and height
equivalent. Set the clock and alarm clock in the clock mode.
NOTE: When setting the mode, press the UP and DOWN keys for two seconds
to reset or restore the default value.
MODE Enter Button to set values.
RESET In any mode, hold down RESET for two seconds for system reset.
ON/OFF 1. The display is turned on and off.
2. The Bluetooth APP can be used when shutdown.
CAL Calorie shortcut key.
STROKES Paddle frequency shortcut key.
SPEED Speed shortcut key.
KM/ML Metric system, British system conversion.

9COMPUTER DISPLAY |
3. OPERATION FUNCTION
1. POWER ON
Press the On/Off button to turn on or off.
2. KEY FUNCTION
a. MODE:
You can switch to the function in the AVG. Digits will flash when it is shown in AVG. The screen will
switch in 6 seconds showing the other functions (KM/H, CAL/H, STR).
When the MODE is pressed, the current function stays there, and it will not flash. You can press
MODE to switch the next function. When you’ve returned to the first function it will switch to
automatic scan mode. Long press MODE to clear data to zero (like reset key).
b. SETTING VALUES:
Use the up/down buttons to increase/decrease your settings for time, age, weight etc. Mode to enter
the values and go to next setting.
c. ON/OFF:
Long press for 3 seconds to shut down. When there is no signal entry in 2 minutes and no operation
in 2 minutes the screen will shut down.
3. TIME
Measuring range: 0:00 to 99:59 Time is counting when there is a signal (in use). Time is paused when
there is no speed signal input within 4 seconds. Set the time value and the buzzer prompts at the
predetermined time.
Setting range: 0:00 to 99:00. The set value is + 1 minute and the second is cleared. If the value is set, it
will countdown. Once it reaches 0, it will be reset.
4. DIST
Measures the distance from movement from beginning and end of workout. Measuring range: 0.000
~9999KM (ML)
Setting range: 0.000 9999.
Setting value is + 0.1 for each time. The buzzer prompts after 0.
5. SPM
SPM paddle frequency counted as unit time / min. Measurement range: 0~999.
6. AVG
Speed: Display range: 0.0~99.9 KM / H (ML / H)
CAL / H: How many calories per kilometer of workout
TIME/500M: Time required to exercise for 500M.
7. CAL
Calories are calculated at 22.8 CAL per kilometer.

10
8. SLEEP
When there is no signal, the display will go to sleep.
9. WAKE UP
Press ON / OFF to turn on the display. The display will store the current values.
10. MOVEMENT AND GOAL SETTING
a. QUICK MOVEMENT:
In the automatic scanning mode, directly step on the machine movement, and the electronic meter
can begin to calculate the motion data.
b. MOTION GOAL SETTING:
In automatic scanning mode, the time, distance, calories and heart rate will be automatically
scanned every six seconds. In the cyclic state, select any function. Press UP or DOWN to set the
target value. After setting, press MODE key to enter the next setting.
c. TARGET TRAVEL:
After setting any movement target, directly step on the machine movement, the electronic watch
can start to calculate the movement data, and the set target value starts to count down. When goal
is reached, the window flashes (and sounds an alarm) and starts the sequence count.
| COMPUTER DISPLAY