LifeSize Icon 600 Parts list manual

LifeSize®Icon 600™
Video System Guide
January 2013

LifeSize Icon Video System Guide 2
LifeSize Icon Video Systems
This guide explains how to use and configure LifeSize Icon video systems. For installation instructions,
refer to the LifeSize Icon 600 Installation Guide.
Extend the capabilities of your LifeSize system by integrating these LifeSize products:
To access the full set of features available with your LifeSize Icon video system, your environment must
include LifeSize UVC Platform with the UVC suite of applications and LifeSize Bridge. Refer to the
documentation that accompanies these products for detailed configuration information.
Related information is available from lifesize.com/support.
Deploying Your LifeSize
Icon Video System Describes setup for your system after installation, such as configuring firewalls and passwords. Refer to the online help for details about configuration preferences.
Using Your LifeSize
Icon Video System Describes how to place and manage calls; start a presentation; and create a recording.
Preferences Lists configuration preferences and their default values.
Maintaining and
Troubleshooting Describes how to upgrade, restore default settings, and reboot your video system. This section also describes symptoms, possible causes, and potential solutions to issues you
may encounter with your video system.
Controlling Your
LifeSize Icon Video
System Through SSH
Provides an overview of using shell commands to control your video system.
LifeSize Bridge Enables multiway video conferences. When LifeSize Bridge is integrated with your video
system, you can access scheduled and on demand calls hosted by the bridge directly
from your video system.
LifeSize UVC Video
Center Allows video recording and publishing when integrated with your LifeSize video system. Viewers access these videos from the LifeSize Video Center server through a browser.
LifeSize UVC Manager Enables IP management of video systems and infrastructure devices. Administrators
use LifeSize UVC Manager to maintain licenses, schedule calls, and generate reports in
a secure environment. With your video system managed by LifeSize UVC Manager,
calls scheduled on LifeSize UVC Manager appear in your video system’s schedule.
LifeSize UVC Transit Firewall and NAT traversal solution that enables video calls within and across
enterprises and organizations.
LifeSize UVC Access Standalone H.323 gatekeeper that provides address translation, network access control,
bandwidth management, and routing management for H.323 calls to gateways, video
systems, and MCUs.
LifeSize UVC
Multipoint Flexible capacity MCU that can allocate port resources according to the video system’s capability. When LifeSize UVC Manager manages LifeSize UVC Multipoint and your
video system, you can access calls hosted by the MCU directly from your video system.

LifeSize Icon Video System Guide 3
Section 1: Deploying Your LifeSize Icon Video
System
At installation, configure your video system by opening a web browser and navigating to the system IP
address that appears in on the main screen of the video system’s display.
NOTE Read more about configuration preferences in the online help available when
you access your video system from a browser.
•Manage administrator passwords. Read more at System Access and Passwords.
•Configure your video system for firewall traversal. Read more at Configuring Your Firewall.
•Set the location and time zone.
•Define the system name.
•From your video system’s display, select >to set the safe area.
•Select the language for onscreen text. You can also select >to select a language from your
video system’s display.
•By default, DHCP is enabled on LifeSize systems. If you disable DHCP, you must specify the system’s
IP address, subnet mask, and default gateway.
•If you are using H.323 gatekeepers in your environment and want to place calls using a name or
extension with the H.323 protocol, configure your LifeSize system to use H.323.
•If you are using Session Initiation Protocol (SIP) servers, configure your LifeSize system to use SIP.
•Configure call, audio, and video preferences.
•Integrate your LifeSize video system with LifeSize Bridge, LifeSize UVC Manager, LifeSize UVC Video
Center, or LifeSize UVC Transit. Read more at Configuring Integrations.

LifeSize Icon Video System Guide 4
System Access and Passwords
Access your video system from a web browser and navigate to Preferences > Passwords to manage
passwords:
Passwords can be up to 16 characters in length and contain any combination of the numbers 0-9, the
letters a-z and A-Z, and the symbols * (star) and # (pound). The passcode must be one to 32 characters in
length and contain any combination of the numerals 0-9.
Remote control Select >and enter the passcode (by default, 1234) to access a limited set of
administrator functions from the video system’s display:
Reset network settings.
Reset all settings.
Revert to the alternate software version and reset all settings to their default values.
Browser Open a web browser and enter the IP address of the LifeSize system. Log in with administrator
credentials The default username and password are admin.
The IP address of the system appears in on the main screen of the video system’s display.
By default, remote management of a LifeSize video system over HTTP is enabled at
Preferences > Security > Enable HTTP and JSON Access.
CAUTION: Disabling HTTP logs you out and prevents you from logging back in to the system.
SSH Log in with administrator credentials in an SSH session and enter commands to manage your
LifeSize system remotely. The default username and password are admin.
By default, remote management over SSH is enabled at Preferences > Security > Enable
SSH Access.
CAUTION: Disabling SSH prevents you from managing the system remotely over SSH.
Read more at Controlling Your LifeSize Icon Video System Through SSH.
LifeSize
UVC Manager With LifeSize UVC Manager, administrators can manage your LifeSize video system and other video systems across the enterprise.
User Access Username Default Password
Administrator Browser, SSH admin admin
Remote control through the video system’s display none 1234
Support Browser, SSH support support

LifeSize Icon Video System Guide 5
Configuring Integrations
You can integrate your LifeSize Icon video system with the following LifeSize applications:
•LifeSize Bridge
•LifeSize UVC Manager
•LifeSize UVC Video Center
•LifeSize UVC Transit
Available options depend on the applications configured in your environment:
Learn more about configuration in the online help available when you access your video system from a
browser. Refer also to the technical documentation for LifeSize UVC Manager.
Configuring Your Firewall
This section explains how to configure your LifeSize video systems for firewall traversal, assuming you are
not using firewall traversal products such as LifeSize UVC Transit. If you are using LifeSize UVC Transit,
refer to the LifeSize UVC Transit Deployment Guide.
Placement Behind a Firewall
LifeSize recommends that you place your system behind a firewall. Use one of the following options:
Option Description Configuration
Schedule Appears when LifeSize UVC Manager
manages your video system. Manage your video system in LifeSize UVC Manager.
Directory Entries appear when your video
system is integrated with a directory
server or LifeSize UVC Manager
manages your system.
Configure the directory server integration in
Preferences > Directory.
Manage your video system in LifeSize
UVC Manager.
Meetings Appears when your video system is
integrated with a LifeSize Bridge or
managed by LifeSize UVC Manager.
Configure LifeSize Bridge integration in
Preferences > Calls > LifeSize Bridge.
Manage your video system in LifeSize
UVC Manager.
Record Appears when you configure your
video system to record to a LifeSize
UVC Video Center.
Configure LifeSize UVC Video Center integration in
Preferences > Record and Stream.
DMZ with public IP address Placing your video systems in the DMZ allows you to assign public IP addresses.
This configuration makes it easier for your system to connect with public video
systems on the Internet.
Private LAN with NAT Placing your video systems in the private LAN with Network Address Translation
(NAT) obscures their private IP addresses, but makes calls with systems outside of
your network more complicated.

LifeSize Icon Video System Guide 6
Firewall Settings for Ports
At a minimum, block external or inbound access to the following ports:
•22 (SSH)
•80 (HTTP)
•443 (HTTPS)
LifeSize recommends that these ports remain open for internal administrator access. Ensure that you
change the default administrator password to be secure. Change the administrator password in
Preferences > Passwords.
You can disable SSH and web access on the system in Preferences > Security.
Call Setup and Media Ports
To place calls to other systems through the firewall, you must configure your firewall to allow incoming and
outgoing traffic to the system through the following:
Restricting Reserved Ports
To place calls to other devices through a firewall, you must configure your firewall to allow incoming and
outgoing traffic to the LifeSize system through the reserved ports. Users placing calls through a firewall to
systems with public IP addresses may experience one-way audio or video if the firewall is not properly
configured to allow two-way audio and video traffic.
By default, LifeSize systems communicate through TCP and UDP ports in the range 60000 - 64999 for
video, voice, presentations, and camera control. LifeSize systems use a subset of these ports during a call.
NOTE The minimum number of required ports is 100.
To minimize the number of UDP and TCP ports that are available for communication, restrict the range by
changing values in Preferences > Network > Reserved Ports. LifeSize recommends that the range you
choose, if other than a subset of the default range, begins with a port number greater than 49151. The
range must start with an even number and end with an odd number to include an even number of total
ports. For a range that starts at 62000, set the lower end to 62000 and the upper end to 62099 to allocate
a range of 100 ports, the minimum.
UDP port 1719
TCP port 1720 Gatekeeper registration. H.323 call negotiation.
UDP port 5060 SIP call negotiation.
TCP port 5060 SIP call negotiation if TCP signaling is enabled for SIP calls.
TCP port 5061 TLS signaling in SIP calls if TLS signaling is enabled.
Required TCP and
UDP ports Range specified in Preferences > Network > Reserved Ports.

LifeSize Icon Video System Guide 7
Using LifeSize Systems in a Private LAN with NAT
If you choose to place your video systems in a private LAN, you must use NAT to communicate with
outside systems. This may include enabling static NAT on your LifeSize system.
On your firewall, whether standalone or built into your router, you must do one of the following:
•Use one-to-one NAT and open the Call Setup and Media Ports over that connection bidirectionally with
an access list.
•Forward the Call Setup and Media Ports to your LifeSize system.
Refer to Restricting Reserved Ports and your firewall vendor's documentation for more information.
Enabling Static NAT
NAT enables communication between devices on your LAN that have private IP addresses and devices
that are accessed through a public IP network. Static NAT ensures that the same public IP address always
maps to a system’s private IP address so that data from the public network intended for the private system
can be routed to the system reliably.
If you are using static NAT to associate a public IP address with the private IP address of your LifeSize
system, you must configure your LifeSize system to work with your static NAT server. Navigate to
Preferences > Network and select Static NAT. Enter the public IP address, hostname, or fully qualified
domain name of your system in NAT Public IP Address.
NOTE You cannot upgrade the system from a web browser outside a firewall when
static NAT is enabled. Instead, perform the upgrade from within the firewall.
Testing your NAT Environment
If your firewall does not employ a feature set that performs H.323 or SIP NAT, you must enable NAT on
your private LifeSize system.
1. Place a call from a system on the Internet to your system in the private LAN. If your private system
connects within the first 2 seconds after answering, your NAT configuration is working properly. If the
call does not connect after answering and disconnects after 30 to 50 seconds, the reserved port
settings on your codec do not match the settings on your firewall. Ensure that the system and firewall
settings for UDP/TCP ports match.
2. If you still cannot place a successful call, you may have to disable the stateful packet inspection
feature on the firewall. Some firewall vendors may call this feature dynamic packet filtering. Refer to
your firewall vendor's documentation for more information.

LifeSize Icon Video System Guide 8
Section 2: Using Your LifeSize Icon Video System
When your LifeSize video system is idle, the screen is black. An incoming call, showing a presentation, or
pressing any button on the remote control activates the system. Point the remote control at the IR receiver
(located on both the camera and the codec), not the screen, and tap a button to activate the system.
Additional options include:
Placing, answering,
and ending a call Select Call and navigate to one of the available calling options:
Favorites
Recents
Directory
Meetings
Dialer
To place a call scheduled on LifeSize UVC Manager, select
Schedule and an entry in the list.
Select Answer to answer a call and to end a call.
Placing a Call
Managing Your Video
System In a Call
Initiating a
presentation Select Presentation to start a presentation.
By default, support for presentations is enabled. If you
connect a laptop to a video input on the system during a call,
a presentation starts automatically.
Initiating a Presentation
Controlling a near
or far end camera To adjust the near end camera when the system is idle, select View .
During a call, select to adjust the near end camera. Select
to adjust the far end camera.
Camera Control
Creating a
recording With LifeSize UVC Video Center configured, select to
create a recording. This feature is available only when you are
not in a call.
Recording with LifeSize
UVC Video Center
My Info Shows the system name and numbers that callers use to dial into the video system.
Do Not Disturb Select to reject incoming calls. When enabled, appears.
Volume Opens a volume navigation bar for you to select a volume level from 0 to 100. The level
represents the volume as a percentage. Use the remote control to adjust the level. Tap
or to adjust the level in 1% increments. Press or to rapidly and continuously adjust
the volume.
Sleep Select to put the video system (including camera and display) to sleep.
Read more at Sleep.
System Select to show system status and information.
Read more at System Options.
5

LifeSize Icon Video System Guide 9
Sleep
Select to put the video system, camera, and display to sleep. The video system automatically sleeps
under the following conditions:
•Ten minutes elapse without user interaction.
•A voice call connects.
Tap any key on the remote control to wake the system. When the system wakes, one of the following
options is highlighted, depending on the state of the video system:
– A system issue is present. Select for more information about the issue.
– The do not disturb feature is enabled.
– A call scheduled on LifeSize UVC Manager is available on your video system.
– No other conditions are present.
Navigation and Search
Your LifeSize video system shows call entries and other system information in lists that you can navigate
with the remote control.
NOTE When you select Russian for the language of the video system’s display, the
search uses the Cyrillic alphabet. Select abc to show the Latin alphabet.
Navigate to the top
or bottom of a list Tap to quickly navigate to the top or bottom of the list.
A bar to the right of the list shows your current position and the total number of entries in
the list.
Search call entries Tap to open a search box to locate call entries.
As you select values, the list is filtered to match any word in an entry’s name that starts
with the filter string. Search box options include:
•Tap to delete a value in the search box.
•Select the # symbol to represent any numeral.
•Select the symbol to insert a space between search entries, allowing you to use
multiple words in your filter.

LifeSize Icon Video System Guide 10
Placing a Call
Place a call using one of the following methods.
When you select an entry in Favorites, Recents, or Directory, calling options can include:
Available calling options also depend on the applications configured in your environment:
•Schedule appears only when LifeSize UVC Manager manages your video system.
•Entries appear in Directory only when your video system is integrated with a directory server or
managed by LifeSize UVC Manager.
•Meetings appears only when your video system is integrated with a LifeSize Bridge or managed
by LifeSize UVC Manager.
A video icon represents a video call in progress. A voice icon represents a voice call. Select to
end the call.
Schedule Select to show calls scheduled on LifeSize UVC Manager for
your video system. Select an entry in the list to dial the number. Joining a Call From the Video System’s Schedule
Favorites Select >to show your Favorites. Select an entry in the list to
dial the number. You can also delete an entry or all entries in
Favorites from this view.
Placing a Call From
Favorites
Recents Select >to show recent calls. Select an entry in the list to
dial the number or add the number to your favorites. You can also
delete an entry or all entries in Recents from this view.
NOTE: Recents is limited to 50 entries.
Placing a Call From
Recents
Directory Select >to show entries in your company directory (or from
LifeSize UVC Manager, if LifeSize UVC Manager manages your
system). Select an entry in the list to dial the number or add the
number to your Favorites.
Placing a Call From the
Directory
Meetings Select >to show available calls scheduled on LifeSize
Bridge (or on LifeSize UVC Manager). Select an entry in the list to
dial the number.
Joining a Meeting
Dialer Select >to enter calling information manually. Specify
alphanumeric characters, call bandwidth, and protocol. Placing a Call Manually
Dial as Video
Dial as Voice Available when the original call was a video call.
Dial Now Available when the original call was a voice call.
To initiate a video call, select Advanced Dialing , navigate to advanced dialing options
and select video.
Advanced Dialing Opens the dialer for you to specify alphanumeric characters, call bandwidth, and protocol.
5 5
5

LifeSize Icon Video System Guide 11
Joining a Call From the Video System’s Schedule
Select to show upcoming calls that are scheduled for your video system by LifeSize UVC Manager.
Details about the call can include the start time, title, description, and participants. Calls that require a
passcode show a lock icon . The schedule also shows time periods during which no calls are scheduled.
A call starts automatically at its scheduled start time.
Placing a Call From Favorites
1. Select >to show entries in your video system’s Favorites.
2. Select an entry.
3. Optional:
-Select Advanced Dialing to open the dialer.
-Select Remove or Remove All to manage the entries in Favorites.
4. Select Dial as Video (or Dial as Voice).
Placing a Call From Recents
1. Select > to show recently dialed , received , or missed calls.
2. Select an entry.
3. Optional:
-Select Advanced Dialing to open the dialer.
-Select Add to Favorites.
-Select Remove or Remove All to manage the entries in Recents.
4. Select Dial as Video (or Dial as Voice).
Placing a Call From the Directory
1. Select >to show entries in your company directory.
2. Select an entry from the list.
3. Optional:
-Select Advanced Dialing to open the dialer.
-Select Add to Favorites.
4. Select Dial as Video (or Dial as Voice).

LifeSize Icon Video System Guide 12
Joining a Meeting
Select >to show a list of scheduled and on demand meetings available to your video system from
LifeSize Bridge or LifeSize UVC Manager. Details about the meeting can include the start time, title, and
description. Calls that require a passcode show a lock icon .
The status for a meeting can be:
Select an entry from the list to join the meeting. If the meeting has not yet started, a counter shows the time
remaining until the meeting is live. You can join the meeting ten minutes before the start time; the bridge
connects you automatically when the meeting is live.
Placing a Call Manually
1. Select >to enter calling information manually. As you enter each character, the corresponding
touch tone is audible for the values 0-9, #, and *. A key click is audible for any other character.
2. Navigate to advanced options to enter alphabetic characters or select a call bandwidth or protocol.
Select the shift character to enter an uppercase letter. Select the shift character twice for caps lock.
The list of available bandwidth values adjusts to the maximum bandwidth preference set by your
administrator. Similarly, only enabled call protocols appear.
3. To place the call, select Call.
Live The meeting has started.
Ready Ready to join. The meeting has no participants.
Active Participants have already joined the meeting.
If an active meeting is full, LifeSize Bridge does not accept new participants.
Unavailable
Full The meeting has no participants and no ports are available.
5

LifeSize Icon Video System Guide 13
Managing Your Video System In a Call
By default, you must manually answer or ignore incoming calls. Administrators can set the Auto Answer
and Auto Answer Mute preferences.
Hide onscreen text Select Hide.
Mute audio Press on the remote control to mute audio to the far end. When enabled,
appears. If audio at the far end is muted, appears.
You can also mute audio to the far end by pressing on your audio device.
Mute video Select >to mute video to the far end. When enabled, appears.
Show picture in picture Select >to show picture in picture video when the video system is in a call.
When enabled, appears.
Change the presentation
layout During a call, select and navigate to the desired layout.
Read more at Initiating a Presentation.
Change the call layout Available in LifeSize Bridge calls only:
Select and navigate to the desired layout. If your video system is integrated
with a LifeSize Bridge, available layouts for the call appear. If your video system is a
participant in a call hosted by LifeSize Bridge but is not integrated with the bridge,
navigate to the desired layout by selecting Next or Previous.
NOTE: is not available if the call has only one available layout.
Move the cameras During a call, select to adjust the near end camera. Select to adjust the far
end camera.
Read more at Camera Control.
Swap camera input If two cameras are connected, select or to swap the primary camera input.
By default, the HD camera is the primary input, camera 1, and the DVI camera is
camera 2. Selecting adjusts camera 1.
NOTE: Presentations are not available with two cameras connected to the video
system.
Use the keypad Select to show a keypad to enter tones if required by the far end.
Show caller information Select >to show details about the caller, including the system name and
number. Call statistics also appear and include the call type and protocol,
connection time, and direction of the call.
End the call Select .

LifeSize Icon Video System Guide 14
Initiating a Presentation
Select Presentation to start a presentation during and before a call. By default, if you connect a laptop
to a video input on the system, a presentation starts automatically and appears. To stop the
presentation, select .
NOTE If your video system is already receiving a presentation, connecting a laptop
does not automatically start a presentation.
Select from the following layout options during a call:
– Presentation input and video from the far end appear side by side.
– Presentation input and video from multiple callers appear. This layout is available with bridge calls
from Meetings .
– Presentation input appears.
– Video from the far end appears.
If the video call does not support presentations simultaneous with video, the video system automatically
swaps the primary and presentation inputs to send the presentation. The near end shows both the camera
and presentation input, and the far end shows only the presentation.
Camera Control
Your LifeSize video system allows you to adjust a camera during and before a call. To prevent far end
users from adjusting the near end camera, your administrator can disable Far Control of Near Camera
(enabled by default) in Preferences > Video. To prevent far end users from using and configuring camera
presets for the near end camera, disable Far Control of Near Camera or Far Set of Camera Presets.
Pan, Tilt, and Zoom
1. Select the camera you want to control:
– Adjust the near end camera anytime the system is not in a call.
– Adjust the near end camera during a call. The near end video appears in the PIP window.
– Adjust the far end camera.
2. To pan and tilt, select to activate the feature.
Tap and to pan and and to tilt. Select Pan/Tilt again to exit.

LifeSize Icon Video System Guide 15
3. To zoom, select to activate the feature.
Tap and to zoom in and out. Select again to exit.
NOTE With the zoom feature active, tap to access Pan/Tilt.
4. To end your camera control session, select .
Camera Presets
A camera preset is a predefined camera position that is associated with a numeral. Camera presets enable
you to quickly change the position of a camera during a call.
1. Select the camera you want to control: , , or .
2. Navigate to the presets and select a numeral. A preset might have two available options:
-If a preset shows Select to move, select the preset to adjust the camera position as defined by
the preset.
-If a preset shows Hold to set, select the preset and hold until Preset saved appears. This action
associates the camera’s position with the numeral.
Recording with LifeSize UVC Video Center
With LifeSize UVC Video Center configured in your environment, you can initiate a recording while you are
not in a call.
1. Select .
2. Select from one of the available recording options to start the recording session:
– Record input from the camera.
– Record input from the presentation.
– Record two streams: input from the presentation and camera.
– Record input from both cameras. Select or to select the camera that provides the
primary input. This option is available only with two connected cameras.
3. Select to start recording.
4. If prompted, enter a valid recording key. If successful, the recording begins and the recording icon
appears.
5. Optional: If you are recording input from the camera or from a presentation, select to toggle the
input: presentation or camera. If you are recording two streams, select to toggle between recording
two streams (presentation and camera) and a single stream (camera).
6. To stop recording, select .
7. To end the recording session, select the appropriate option: , , , or , depending on your
selection in step 2.

LifeSize Icon Video System Guide 16
Managing Calls Hosted by LifeSize Bridge
When LifeSize Bridge is integrated with your LifeSize video system, scheduled and on demand
conferences available to your video system appear in >. When you join a call from Meetings , all
LifeSize Bridge layouts available for the current call scenario appear. If the current call scenario supports
more than one layout, appears. To change the call layout, select and navigate to the desired
layout.
When you join a call that is hosted by a LifeSize Bridge that is not integrated with your LifeSize video
system, select to access options in LifeSize Bridge:
1. Tap and and select Menu to show bridge options:
2. Navigate the menu by selecting onscreen touch tones:
2 – Up
8 – Down
6 – Select
-or-
Use the arrows on the navigate button.
NOTE Select ## to switch the method of navigation.
If the LifeSize Bridge Virtual Operator answers the call, you are prompted to select a conference to join.
Self View The view from a participant’s camera appears on their screen.
Speaker Order When enabled, the most recent speaker appears in the prominent window.
Status Indicators When enabled, status icons appear.
Mute Video When enabled, mutes video.
Announcements Voice prompts and system sounds indicate the current system status or
action required.
Camera Control Navigation
Touch Tone Navigation Toggles far end camera control and DTMF tones.
Language The language of the onscreen text and voice prompts for LifeSize Bridge.
Text Inset How far the text is offset from the sides of the screen.

LifeSize Icon Video System Guide 17
Dual Displays
When you connect a second display, your LifeSize video system automatically configures the second
display and shows the following information, depending on the state of the video system. The icons on the
main screen do not appear on the second display.
Connecting a second display requires a license key. Contact your LifeSize Representative for details.
System Options
Select to access system options:
When the video system is... The second display shows...
Idle Black
Showing a presentation in or out of a call Presentation input
Showing video from a call with no presentation Video from the call; indicates whether the call is local or
remote in origin
Shows the status of the system, including communications, system inputs and outputs, temperature
sensors, and fan speeds.
Shows detailed system information, including communications, network, system inputs and outputs, and
cameras.
Allows you to configure the safe area of your display.
Shows the system’s IP address for your administrator to configure the system. If the system is not configured
or inoperable, serial port information appears.
Select the language for onscreen text.
Shows licenses applied to the system.
After confirmation, reboots the system.
Provides access to administrative tasks:
– Resets network settings to their default values: enables DHCP, resets the VLAN tag to 0, and enables
HTTP and SSH.
– Resets all settings to their default values and reboots the system.
– Reverts the system to an alternate software version, resetting all preferences to their default values,
and then reboots the system.
This area requires a numeric passcode. Select to log out.

LifeSize Icon Video System Guide 18
Section 3: Preferences
To configure preferences, access your system from a browser by entering the system’s IP address and
logging in. The default username and password are admin.
Preferences for the following categories are in Preferences:
Preferences for Camera Diagnostics are in Diagnostics.
Appearance
Preferences > Appearance
Audio
Preferences > Audio
NOTE Set the active microphone with the LifeSize API over SSH.
Calls
Preferences > Calls
Appearance Diagnostics Passwords SIP Registrar 2
Audio Directory Record and Stream System
Calls H.323 Security LifeSize UVC Transit
Date and Time Network SIP Registrar 1 Video
Preference Default Value
Language English
Preference Default Value
Audio Output HD Out
Analog Mic Gain Line Level
Preference Default Value
Auto Answer Disabled
Auto Answer Mute Enabled
Auto Bandwidth Enabled
Maximum Call Bandwidth 6000 kb/s
Auto Call Bandwidth 1152 kb/s
Presentations Enabled
Enable Bridge Integration Disabled

LifeSize Icon Video System Guide 19
Date and Time
Preferences > Date and Time
Diagnostics
Preferences > Diagnostics
IP Address No default
Username No default
Password No default
Preference Default Value
System Time Greenwich Mean Time (GMT) value
System Date GMT value
Time Zone GMT
Clock Format 12-Hour
NTP Server Hostname No default
Preference Default Value
Syslog Server No default
Audio Information
Communications Information
Database Information
License Manager Information
System Administration Information
System Information Information
System Status Information
Timer Information
User Interface Information
Video Hardware Information
Video In Information
Video Out Information
Preference Default Value

LifeSize Icon Video System Guide 20
Directory
Preferences > Directory
H.323
Preferences > H.323
Preference Default Value
LDAP
Hostname No default
Username No default
Password No default
Base No default
Port No default
Encryption None
Preference Default Value
General
Use H.323 Enabled
Gatekeeper
Name Number randomly generated by the system
Extension Same value as Name
Gatekeeper Mode Off
Available Preferences with Gatekeeper Mode: Auto
Gatekeeper ID No default
Gatekeeper Authentication Disabled
Gatekeeper Username No default
Gatekeeper Password No default
Available Preferences with Gatekeeper Mode: Manual or Manual H.460
Gatekeeper Address No default
Gatekeeper Port 1719
Gatekeeper Authentication Disabled
Gatekeeper Username No default
Gatekeeper Password No default