Lilin AHD701A3.6 User manual

Instruction
Part Description & Dimension
AHD IR CAMERA
66-AHD701ACSE-3
154
101
72.5
67
Unit: mm
82
35
67
12.5
R 2.25
TOP COVER
BOTTOM CHASSIS
BRACKET
PAN ADJUSTMENT SCREW
TILT ADJUSTMENT SCREW
WINDOW
VIDEO OUTPUT JACK
DC POWER INPUT JACK (DC12V 10%)±
Installation
1. Take out the camera from the inner box first. Plug the video cable and power
cable to video output jack and DC power input jack of the camera (FIG.1).
Then fix bracket to the wall(FIG.2).
DC power input
Video output
FIG. 1 FIG. 2
2. Loosen the pan and tilt adjustment screw on the bracket to turn the camera
body to the desired angle and then tighten the screws(FIG.3).
FIG. 3
3. Open the top cover with screw driver(FIG.4).
FIG.4
4. Adjust the OSD menu to form the optimal image .(FIG.5)
FIG.5
RIGHTLEFT
DOWN
UP
SET
4-1. USER OSD SETTING
Setting switches and Functions.
A. (UP)
B. (LEFT)
C. (RIGHT)
D. (DOWN)
E. SET : Executes selections and displays a submenu for an
item with the mark.
: Press to move the cursor upwards or to select
items.
: Press to move the cursor to the left and to select
or adjust the parameters of the selected item.
The parameters changes each time this button is
pressed.
: Press to move the cursor to the right and
select or adjust the parameters of the selected
item. The parameters changes each time this
button is pressed.
: Press to move the cursor downwards or to select
items.
FIG. 7
5. Replace the top cover and tighten the screws(FIG.6&FIG.7).
FIG. 6
MAIN
MENU
LENS
EXPOSURE SHUTTER AUTO/ 1/30(1/25)/ 1/60(1/50)/ FLK~1/50000/ X2~X30－
OFF
OFF
OFF
BRIGHTNESS (1~100)
SENS-UP
DEFOG
AGC 0 15~( )
AUTO SENS-UP (X2~X30)－
AUTO
ON LEVEL (0~8)－
AUTO
D-WDR
Menu Map
MANUAL
MODE
DC
IRIS SPEED (0~15)
INDOOR
OUTDOOR
POS/SIZE POSITION/ SIZE－
GRADATION (0~2)
DEFAULT
MIN SHU 1/30(1/25)－
MAX SHU 1/60(1/50)~1/50000－

BACKLIGHT
DAY&NIGHT
SPECIAL
NR
WHITE BAL ATW
AWC SET→
INDOOR
OUTDOOR
MANUAL
AWB
OFF
EXT
CAM TITLE
2DNR MIDDLE/ HIGH/ OFF/ LOW－
HSBLC
COLOR
MOTION
BLC
AUTO
D-EFFECT
B/W
3DNR MIDDLE/ HIGH/ OFF/ LOW－
LEVEL MIDDLE/ HIGH/ LOW－
D N (DELAY) 0~60－→
OFF
OFF
ON POSITION/ SIZE－
VIEW TYPE ALL/ OFF/ BLOCK/ OUTLINE－
OFF
SELECT AREA 1/ 2/ 3/ 4－
D N (AGC) 1~255－
→
FREEZE－OFF/ ON
SELECT－AREA 1/ 2/ 3/ 4
BURST－OFF/ ON
AREA POSITION/ SIZE－
N D (DELAY) 0~60－
→
ON
ON
OFF
OSD VIEW ON/ OFF－
ALARM OUT. ON/ OFF－
ALARM SIG. HIGH/ LOW－
TIME (1~15)
ON
DISPLAY
D N (DELAY) 0~60－
→
MIRROR－OFF/ MIRROR/ V-FLIP/ ROTATE
DISPLAY
IR SMART
N D (AGC) 1~255－
→
NEG. IMAGE－OFF/ ON
SENSITIVITY (0~100)
COLOR GREEN/ BLUE/ WHITE/ RED－
TRANS 1.00/ 0.75/ 0.25/ 0.00－
ALARM
DEFAULT
IR PWM 100~1/ OFF－
DEFAULT
BLACK MASK ON/ OFF－
N D (DELAY) 0~60－
→
LEVEL (0~100)
MODE
DEFAULT
ON POSITION/ SIZE－
OFF
ALL DAY
NIGHT AGC LEVEL (0~255)－
BLUE (0~100)
RED (0~100)
LEVEL (0~15)
AREA POSITION/ SIZE－
PRIVACY
DEFECT
ADJUST
OFF
SELECT AREA 1/ 2/ 3/ 4－
ON
COLOR WHITE/ BLACK/ RED/ BLUE/ YELLOW/
CYAN/ USER
－
GREEN/
TRANS. 1.00/ 0.25/ 0.50/ 0.75－
DEFAULT
DISPLAY COLOR POSITION/ SIZE－
OFF
MOSAIC POSITION/ SIZE－
INV.－POSITION/ SIZE
LIVE DPC
SHARPNESS
RS485
WHITE DPC
BLACK DPC
ON
ON
ON
AUTO
CAM ID (0~255)
ID DISPLAY
OFF
OFF
OFF
OFF
BAUDRATE 38400/ 2400/ 4800/ 9600/ 19200－
OFF
ON
LANGUAGE ENG/ CHN1/ CHN2/ GER/ FRA/ ITA/ SPA/ POL/ RUS/ POR/
TUR
－
NED/
AGC LEVEL (0~255)
LEVEL (0~10)
POS/ SIZE POSITION/ SIZE－
POS/ SIZE POSITION/ SIZE－
LEVEL (0~100)
START AGC (0~255)
END AGC (0~255)
START CLOSE THE IRIS THEN PRESS
ENTER
－
START PRESS ENTER－
DPC VIEW OFF/ ON－
DPC VIEW OFF/ ON－
LEVEL (0~60)
LEVEL (0~100)
AGC (0~14)
SENS-UP (X2~X30)
EXIT
MONITOR
LSC ON/ OFF－
VIDEO. OUT NTSC/ PAL－
LCD
SAVE&END
RESET
CRT
NOT SAVE
GAMMA USER/ 0.45~1.00－
BLUE GAIN (0~100)
BLUE GAIN (0~100)
RED GAIN (0~100)
RED GAIN (0~100)
Specifications
NOTES
Setting Menu and Function
1. Press and hold the LEFT key for more than 5 sec. will enter the 1280H mode.
2. Press and hold the RIGHT key for more than 5 sec. will enter the AHD mode.
3. Press and hold the DOWN key for more than 5 sec. will enter the NTSC or
PA L m o d e .
To Open and Exit the Menu screen
1. Press "SET" to show the menu on the screen. Check the current settings
on the menu.
2. Press or button to select the options then us e o r b u t t o n to se l e c t
a mode.
SAV E & E N D : S a v e t h e s e t t i n g s o f the internal OSD menu.
: Discard the settings of the internal OSD menu.
RESET: Restore the camera settings to factory defaults.
RETURN: Re turn to the previous page.
EXIT: Exit the main menu.
NOT SAV E
MAIN MENU
OFF
ATW
EXIT
SAVE&END
MANUAL
2. EXPOSUTE
3. BACKLIGHT
4. WHITE BAL
5. DAY&NIGHT
6. NR
7. SPECIAL
8. ADJUST
9. EXIT
1. LENS
Lens
System
Model No.
Pick Up Element
Effective Pixels
Scanning System
Menu Control
Sync. Mode
Infrared Cut Filter
Resolution
Minimum Illumination
S/N Ratio
Auto Gain Control
White Balance
Shutter
Auto
Manual
Back Light Compensation
D-WDR
Sense-Up
Noise Reduction
Defog
Privacy Masking
Privacy Masking Zone
Video Output
IP Rating
Window
Infrared
LED Beam Spread
Radiant Distance
OSD Language
Power Input Voltage
Focal Length
Iris
Angle of View
H
V
D
NTSC or PAL
1/3" CMOS Image Sensor
1,305(H) x 977(V)
Progressive Scan
OSD Control
Internal
Auto Selectable, Automatic Switch from Color Mode to Monochrome
1280(H) x 720(V) @ 30/25fps
0.02Lux / F1.8, 0Lux (IR On)
More than 55dB (AGC-Off)
AUTO (16 Steps)
ATW / AWC / INDOOR / OUTDOOR / MANUAL / AWB
1/60(1/50)S ~ 1/50,000S
1/30(1/25)S, 1/60(1/50)S, FLK, 1/240S, 1/480S, 1/1,000S, 1/2,000S,
1/5,000S, 1/10,000S, 1/50,000s
OFF / BLC / HSBLC
OFF / ON / AUTO
OFF / AUTO (X2 ~ X30)
2DNR & 3DNR
OFF / AUTO
OFF / ON
4 Zones
AHD720P / 1280H
IP66
ψ65 Heat Resistanet Glass
850nm
30°
30M
ENG / CHN1 / CHN2 / GER / FRA / ITA / SPA / POL / RUS / POR /
NED / TUR
DC12V 10%±
AHD701A3.6
D/N 720P AHD (VARI-FOCAL) IR CAMERA
AHD701A6 AHD701AX4.2
Power Consumption 4.6W
530g
Design and specification are subject to change without notice.
Operating Temperature
Dimension
Weight
-40 C ~ +50 C° ° ° °(-40 F ~ 122 F)
Body: 82mm(W) x 72.5mm(H) x 154mm(D), Bracket: 101mm(L)
3.6mm 6.0mm
F2.0
72.2°46.5°
52.9°34.5°
94.3°59.3°
F1.8
2.8 ~ 12mm
91 ~ 28°°
67.5 ~ 21.2° °
120.8 ~ 36°°
F1.4
0.01Lux / F1.4, 0Lux(IR On)
4.1W
545g
Peak Wavelength