Lilin IPR414/418ESX3 User manual

D/N CMOS HD VARI-FOCAL INFRARED IP CAMERA
INSTRUCTION MANUAL
MERIT LILIN ENT. CO., LTD
http://www.meritlilin.com 66-IPR414CSE
IPR414/418ESX3

All the safety and operating instructions should be read before the unit is operated.
The safety and operating instructions should be retained for future reference.
All warnings on the unit and in the operating instructions should be adhered to.
All operating and user instructions should be followed.
Only a qualified electrician should make electrical connections.
Do not use attachments not recommended by the product manufacturer as they may cause hazards.
All cable runs must be within permissible distance.
This unit must be properly and securely mounted to a supporting structure capable of sustaining the weight
of the unit.
IMPORTANT SAFEGUARDS
SAFETY PRECAUTIONS
1. Read Instructions
2. Retain Instructions
3. Head Warnings
4. Follow Instructions
5. Electrical Connections
6. Attachments
7. Cable Runs
8. Mounting
CAUTION
RISK OF ELECTRIC SHOCK
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT OPEN COVER.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
to constitute a risk of electric shock to persons.
the literature accompanying the unit.
Unpack carefully. Electronic components can be damaged if improperly handled or dropped. If an item appears
to have been damaged in shipment, replace it properly in its carton and notify the shipper.
Be sure to save:
1. The shipping carton and packaging material. They are the safest material in which to make future shipments
of the equipment.
2. This Installation and Operating Instruction.
If the unit ever needs repair service, the customer should contact our dealer or branch for authorization to
return and shipping instructions.
UNPACKING
SERVICE

Do not drop or strike this equipment.
Do not install the equipment near any naked flames or heat sources
Do not expose this unit ot rain, moisture, smoke or dust environment.
Do not cover the opening of the cabinet with cloth and plastic or to install this unit in poor
ventilated places. Allow 10cm between this unit and its surroundings
Do not continue to operate the unit under abnormal conditions such as detection of smoke,
strange smell or no display on screen while power is turned on.
Do not touch the power connection with wet hands.
Do not damage the power cord or leave it under pressure.
Do not operate this unit near magnet, speaker system, etc., to avoid unnecessary magnetic
interference.
Connection cables should be grounded properly.
Caution
Executive Summary
IPR414/418ESX3 is an outdoor HD Infrared IP camera build in H.264 AVC (Advanced Video
Coding) video compression. H.264 AVC video compression engine supports high definition video
quality, 720P resolution, bandwidth efficiency with PPPoE and DDNS.
Also it provides higher bit rate of internet and diverse alarm functions such as external alarm
or movement video detection E-mail or FTP. Moreover, IPR414/418ESX can do remote
surveillance with Java or Windows Mobile cell phone. The software R&D engineer can use HTTP
protocol (HTTPAPI) to develop related software, and integrate them with existing application
software system.
IPR414/418ESX is ideal solution for remote video monitoring via Internet.
1

Unit : mm
105
112
347
387
211.5
82.55
SUN SHIELD
TOP COVER
BOTTOM CHASSIS
BRACKET
PAN ADJUSTMENT SCREW
TILT ADJUSTMENT SCREW
WINDOW
SENSOR CAP
2
Chapter 1. Part Description & Dimension
Chapter 2. Installation
1. Take out the bracket from the box first. Put the power cable, RJ-45 network cable and video
cable through the bracket and then fix it ot the wall (FIG.1 & FIG.2)
FIG. 1 FIG. 2

3
2. Secondly, take out the camera body and open the top cover with screw driver (FIG.3)
FIG. 3
3. Put the power cable, RJ-45 network cable and video cable through the bracket rubble first and
then go through the bottom of camera body (FIG.4). Plug and fix the power cable to the terminal,
plug the RJ-45 network cable to RJ-45 LAN connector, and plug the video cable to output of the
camera (FIG.5).
FIG. 4
FIG. 6
4. Next, use the provided 1/4"-20UNC screws (silver-4pcs) to fix the camera body on the bracket
with hexagon screw driver (FIG.6)
LN
Note :
When using two-cord
power cable, please
connect them to
"Live" and "Neutral".
Live
Earth
Neutral
FIG. 5
FIG. 7
5. Loosen the pan and tilt adjustment screw on the bracket to turn the camera body to the desired
angle and then tighten the screws (FIG.7)

4
6. First, adjust the lens on focus and zoom to form the optimal video image after that tighten the
screws. Adjust the IRIS level VR to form the optimal image brightness (FIG.8).
FIG. 9 FIG. 10
7. Replace the top cover and tighten the screws (FIG.9 & FIG.10)
FOCUS or ZOOM
FIG. 8
ZOOM or FOCUS
IRIS LEVEL
VR
Chapter 3. System Overview
Top View
AlarmIn/Out &Audio In/Out
Connector
SDCard Connector
VideoOutJack
LoadDefault Button
RJ-45Jack
Input/Output Device
Component Description
GND
AUDIO OUT
AUDIO IN
GND
DIN
COM
NO
+5V OUT

5
Chapter 4. System Architectures
For connecting IPR414/418ESX to the network, please follow one of the system architectures:
(1) Hardware Installation using a PoE Switch.
IPR414/418ESX
PoE+(30W)
Switch
PC
LAN LAN / Internet
IPR414/418ESX
PoE+(30W)
Power Injector
PC
LAN LAN / Internet
AC
Non-PoE Switch
LAN
IPR414/418ESX PC
LAN LAN / Internet
Non-PoE Switch
(2) Hardware Installation using a non-PoE Switch.
(3) Hardware Installation using a AC24V or AC100~240V.
AC24V or AC100~240V

6
Chapter 5. Specifications
Model No.
Lens
Power Input Voltage
Effective Pixels
Pick Up Element
Chip Size
Scanning System
Infrared Cut Filter
Minimum Illumination
Back Light Compensation
White Balance
Electrical Shutter
Power Consumption
Live Video Output
Operating Temperature
IP Rating
Infrared
LED Beam Spread
Peak Wavelength
Radiant Distance
Dimension
Weight
Focal Length
Iris
Angleofview
H
V
D
IPR414ESX3
AC24V ( 10%)
1280(H) x 800(V) = 1,024,000 (pixel)
1/4" Progressive scan CMOS sensor
3.88mm(H) x 2.43mm(V)
Progressive Scan
Auto / Schedule / Day(Color) / Night(Mono)
Color: 2Lux at F1.2 , Mono: 0.4Lux at F1.2 , 0Lux with IR
Auto
Auto / 3200K / 4700K / 5600K / 6500K / 7500K / 9300K
1/60s ~ 20,000s
17W (PoE+, 20W)
PoE+ (IEEE 802.3at compliant)
CVBS 1.0Vp-p, 75ohm
IP66
850nm
30
-10 ~ +50 (14 ~ 122 )
Body:120mm(W) x 112mm(H) x 387mm(D), Bracket: 211.5mm(L)
2200g
40M
IPR418ESX3
Design and specifications are subject to change without notice.
OUTDOOR D/N CMOS HD VARI-FOCAL INFRARED IP CAMERA
AC100~240V
Window 78 Heat Resistant Glass
3~9mm
F1.2
62.3 ~ 21.2
45.8 ~ 15.9
79.7 ~ 26.5

66-IPR414CSE-1
7
Design and specifications are subject to change without notice.
Video Compression
Resolution
Frame Rate
Video Streaming
Video Bitrate
Users
Digital Zoom
Multiple Profile
Security
Maintenance
Network Protocols
Mobile Phone and PDA
Alarm/Motion
Client PC Requirement
CPU, Memory
Network Interface
CMX
Video Display
System Integration
SD Card recording
Two-way audio
OS
Alarm Input / Output
H.264/AVC, Motion JPEG
720P(1280x768) / VGA(640x384) / CIF(320x192)
Up to 720P 30FPS shared by profiles
TRSP: RTP/HTTP, RTP/TCP, RTP/UDP
128Kbps ~ 5Mbps
8 simultaneous each profile
Yes
Image upload over FTP, e-mail by motion detection, and external alarm inputs
Stream 4 profiles: H.264 at 720P, JPEG at 720P, H.264 at VGA, JPEG at CIF
Firmware update via HTTP
Firmware available at web site
IP, TCP, UDP, HTTP, SMTP, ESMTP, NTP, DDNS, FTP, ARP, DHCP,
PPPoE, DNS, Telnet, ONVIF
Free eMobile software for Java mobile phone, Windows Mobile 5/6,
PDA, BlackBerry, and iPhone
Base64 HTTP encryption
Multiple user access levels with password protection
10 user accounts available
Events triggered by built-in motion detection
15x10 motion detection zone
Alarm/Motion triggering recording into SD card
OS: Windows 2000, Windows XP, Windows Vista
Browser: Windows Internet Explore 5.0 or above
CPU: Intel Pentium 4 1.8GHz or above
RAM: 1GB or above, Independent Display Card
Embedded SoC, ARM9, 500MHz, 64MB DDR, 8MB flash memory
10Mbps / 100Mbps Base-T, RJ-45
Free CMX support
LILIN Universal ActiveX / Quick Time
ONVIF
Support SD/SDHC card for circular recording (card is not included)
G.711 / PCM
Embedded Linux 2.4.19
Digital 1 input(TTL, +3~5V) / 1 output (N.O.)
NETWORK

D/N CMOS HD VARI-FOCAL INFRARED IP CAMERA
INSTRUCTION MANUAL
MERIT LILIN ENT. CO., LTD
http://www.meritlilin.com 66-IPR414CSE
IPR414/418ESX3