Lilin H.264 User manual

INSTRUCTION MANUAL
Full HD H.264 IP Cameras

1
Executive Summary
Full HD IP Cameras, iMEGAPRO II, III, and V, adopts the latest compression
technologies providing Quadruple Streaming of H.264 and JPEG in different
resolutions. Quadruple Streaming technologies allow transmitting digital video at
various bitrate and frame rate to fit both high and low bandwidth network
environment.
Full HD IP Camera series are equipped with 2, 3, or 5 progressive mega-pixel
CMOS providing superior video quality. The DSP technologies of the IP
cameras provide wide dynamic range (WDR), 3D noise reduction, backlight
compensation (BLC), ePTZ, region of interest (ROI), adjustable shutter speed,
and privacy mask features enabling the camera be installed at most
environments.
Built-in intelligent video analytics engine enables face, tampering, audio, and
motion detection for extra protection. These features can be easily interfaced by
other applications. Other useful features include two-way audio, SD card
recording, mobile phone live access, email snapshot, and continuous JPEG FTP.
iMEGAPRO II, III, and Vseries have the latest technologies providing 2, 3, or 5
mega pixel H.264 video, outstanding DSP capacities, built-in video analytics,
ONVIF conformant, and PoE built-in with all these features integrated within one
camera. CMX Software HD and Full HD IP Camera series can maximize entire
system performance providing integrated system solution in migrating to IP Video
application.
Key Features
 Full HD IP camera at 30 FPS
 Support dual encoding format H.264 and JPEG
 Quadruple Streaming technology, 4 concurrent streaming available
 Sense-Up Plus for difficult light condition
 Day or night video quality scheduling
 Built-in intelligent video analytics (IVA) engine for face, tampering, audio, and
motion detection
 IVA alarm notification via Email or FTP
 Support 3D DNR, WDR, BLC, ePTZ, ROI, Shutter Speed, and privacy mask.
 Two-way audio (for audio models only)
 Bit rate and frame rate adjustable on-the-fly

2
 Support Android, iPad, and iPhone mobile live monitoring
 Dynamic DNS (DDNS) supported
 Network time protocol (NTP) supported
 Support PCM/G.711
 Support ONVIF protocol
 Support CMX Software HD 3.6
Trademark Acknowledgments
Microsoft, Windows 2000, Windows XP, Windows Vista, Windows 7, ActiveX, and
Internet Explorer are registered trademarks of Microsoft Corporation in the U.S.
and/or other countries.
Java and all Java-based trademarks and logos are trademarks or registered
trademarks of Sun Microsystems, Inc. in the United States and other countries.
Flash, Macromedia, and Macromedia Flash Player are either trademarks or
registered trademarks of Adobe Systems Incorporated in the United States and/or
other countries.
Linux and DynDNS are registered trademarks of the respective holders.
Intel, Pentium, and Intel® Core™ 2 Duo are registered trademarks of Intel
Corporation.
FFmpeg is a trademark of Fabrice Bellard, originator of the FFmpeg project.
QuickTime and the QuickTime logo are trademarks or registered trademarks of
Apple Computer, Inc., used under license there from.
Other names of companies and their products mentioned in this manual may be
trademarks or registered trademarks of their respective owners.

3
Other References
Mobile phone
For free mobile surveillance, please refer to eMobile document in the product CD
or download the document from our company web site.
LILIN Universal ActiveX Control
Sample code and document are included in product CD and can be downloaded
from our company web site.
LILIN HTTP API
For non-ONVIF integration, please see LILIN HTTP API document. We adopt
HTTPAPI document for all Full HD IP cameras.
Caution
 Do not drop or strike this equipment
 Do not install the equipment near any naked flames or heat sources
 Do not expose this unit to rain, moisture, smoke or dust environment
 Do not cover the opening of the cabinet with cloth and plastic or to install this
unit in poor ventilated places. Allow 10cm between this unit and its
surroundings
 Do not continue to operate the unit under abnormal conditions such as
detection of smoke, strange smell or no display on screen while power is
turned on
 Do not touch the power connection with wet hands
 Do not damage the power cord or leave it under pressure
 Do not operate this unit near magnet, speaker system, etc., to avoid
unnecessary magnetic interference
 Connection cables should be grounded properly

4
Table of Content
Chapter 1 System Overview....................................................................................6
Chapter 2 Before Accessing IP Camera.................................................................. 7
Chapter 2-1 Configure IP Address Using IPScan Utility........................................ 7
Chapter 2-2 Configure IP Address Using HTML Page..........................................8
Chapter 2-3 Internet Browser Setting & Software Component Required.............. 8
Chapter 2-4 Login..................................................................................................9
Chapter 3 Start Using H.264 FULL HD IP Camera Network Features..................10
Chapter 3-1 IP Camera Operational HTML Page ...............................................10
Chapter 3-2 IP Camera Main Page Controls....................................................... 10
Chapter 3-2-1 ePTZ........................................................................................11
Chapter 3-2-2 Region of Interest (ROI)..........................................................12
Chapter 3-2-3 Control Panel...........................................................................12
Chapter 3-2-4 Two-way Audio........................................................................13
Chapter 3-2-5 Record in a Local PC .............................................................. 13
Chapter 3-3 Configuration ...................................................................................13
Chapter 3-3-1 Server Settings........................................................................14
Chapter 3-3-2 User Settings...........................................................................15
Chapter 3-3-3 Timer ....................................................................................... 16
Chapter 3-3-4 System Setting........................................................................16
Chapter 3-4 Network ........................................................................................... 17
Chapter 3-4-1 General Settings......................................................................17
Chapter 3-4-2 DHCP Setting..........................................................................18
Chapter 3-4-3 HTTP & RTSP Service............................................................ 19
Chapter 3-4-4 SMTP Service ......................................................................... 19
Chapter 3-4-5 FTP Service.............................................................................20
Chapter 3-4-6 DDNS Settings ........................................................................21
Chapter 3-5 Video Settings .................................................................................22
Chapter 3-5-1 Video General .........................................................................22
Chapter 3-5-2 Weighted Streaming Mode......................................................23

5
Chapter 3-5-3 Video Quality........................................................................... 23
Chapter 3-5-4 Sense-Up Plus ........................................................................25
Chapter 3-5-5 Privacy Mask...........................................................................25
Chapter 3-5-6 Region of Interest (ROI)..........................................................26
Chapter 3-6 IR Cut Removable........................................................................... 27
Chapter 3-7 SD Card Recording .........................................................................27
Chapter 3-7-1 SD Card Recording Setting.....................................................27
Chapter 3-8 Alarm Settings .................................................................................29
Chapter 3-8-1 Motion/Alarm Setup................................................................. 29
Chapter 3-8-2 Setup for Camera with Alarm Input......................................... 29
Chapter 3-8-3 Motion Area.............................................................................29
Chapter 3-8-4 Face Detection........................................................................ 30
Chapter 3-8-5 Audio Detection....................................................................... 31
Chapter 3-8-6 Tampering Detection...............................................................31
Chapter 3-9 Audio Setting................................................................................... 32
Appendix................................................................................................................... 33
Advance Network DDNS and PPPoE Technologies........................................... 33
Advance Network Port Forwarding Technology..................................................34
Emergency Factory Default................................................................................. 34
SD Card Compatibility List...................................................................................34
Specification ............................................................................................................. 35

6
Chapter 1 System Overview
Chapter 1-1 System Requirements
The IP Camera’s Full HD H.264 video compression technology can provide high
compression rate and superior video quality. However, the performance highly
depends on both CPU computational power of a client PC and the network
bandwidth for transmitting video streaming. The following sections specify
system requirement for running Full HD H.264 IP Camera:
Chapter 1-2 Software Requirements
Merit LILIN Universal ActiveX software components are required for web
interface displaying JPEG or H.264 FULL HD video. When you first time login
the IP camera using Internet Explorer, it prompts for a security warning dialog box
for downloading LILIN Universal ActiveX. Please click on Install button to
download.

7
Chapter 2 Before Accessing IP Camera
Before accessing the IP camera, make sure that the camera’s RJ-45 network
cable, audio cable, and IP camera’s power cable are properly installed. For
setup IP address, please consult your network administrator for available IP
addresses. The default IP address of IP camera is 192.168.0.200. User can
also use default IP address to verify IP camera’s network connection.
Chapter 2-1 Configure IP Address Using IPScan Utility
To configure IP address using IPScan utility, copy IPScan application from
installation CD to your local PC or execute IPScan software from installation CD
directly. IPScan utility can also be downloaded from our company web site. To
change IP address, subnet mask, gateway, or HTTP port, please follow steps
below:
 Run IPScan utility.
 Click on Refresh button. All available devices get listed in Device list box.
 Select the device item in Device list box.
 Edit or modify addresses in IP, Subnet Mask, Gateway, or HTTP Port edit box.
 Click on Apply button to configure the settings.
 Click on Refresh button to verify the settings.
Note:
Make sure that IPScan is version 1.0.0.31 or above.

8
Chapter 2-2 Configure IP Address Using HTML Page
To change IP address using HTML page, please first type the default IP address,
192.168.0.200 in Internet browser and follow steps below:
 Logon H.264 FULL HD IP camera using default username and
password—“admin” and “pass”.
 Click on “Configure” hyper link.
 Click on “Network->General” hyper link.
 Type or modify edit box for IP address, subnet mask, gateway, or HTTP
connection port.
 Click on Submit button.
Chapter 2-3 Internet Browser Setting & Software Component Required
Make sure that your Internet Browser allows signed ActiveX plug-in running on
your PC. Set “Download Signed ActiveX plug-in controls” to “Prompt” and “Run
ActiveX control and plug-in” to “Enable” at Internet
Explorer->Tools->Options->Security Settings.
After finishing above security settings, accessing H.264 FULL HD IP camera’s live
video by default IP address of H.264 FULL HD IP camera using Internet Explorer
will prompt a Security Warning dialog box. Click on OK button to download the
ActiveX directly from H.264 FULL HD IP camera.

9
Chapter 2-4 Login
There are two levels of user authentication including administrator and guest for
accessing the H.264 FULL HD IP camera.
The default settings of username and password are described as follows:
Administrator Guest
Username admin guest
Password pass guest
To logon the H.264 FULL HD IP camera, please type username and password in
logon HTML page and click on Submit button to enter the system.

10
Chapter 3 Start Using H.264 FULL HD IP Camera
Network Features
After login H.264 FULL HD IP camera as administrator, there are two main
features—system operation and configuration. Operation and configuration
features are described as follows:
Chapter 3-1 IP Camera Operational HTML Page
H.264 FULL HD Series operational HTML page layout
1. Control panel—IP camera control panel.
2. LILIN Universal ActiveX control—Display RTSP H.264 or JPEG
network video.
3. Profile switching menu—Switching one profile to another
4. Setup menu—IP camera setup menu
Chapter 3-2 IP Camera Main Page Controls
IP Camera control panel contains ePTZ or ROI. These features cannot co-exist
together. For ePTZ and ROI, they are described as below:
2.
3.
4.
1.

11
Chapter 3-2-1 ePTZ
To operate IP Camera DSP’s ePTZ, please enable ePTZ feature on the main
page. A user can operate up, down, left, right, zoom in, zoom out, and presets
on main page.
When ePTZ is off, LILIN Universal ActiveX control also provides ePTZ
(electronically pan, tilt, and zoom) feature. To perform ActiveX ePTZ feature,
please use a computer mouse to drag on the ActiveX control.
LILIN Universal ActiveX control becomes eZoom mode.

12
Please use computer mouse pointing to the sub-window of PIP view. Dragging
the sub-window can perform ePan and eTilt. Using mouse scroll button can
perform zoom in and out features.
Performing right-mouse click on the video can disable ePTZ feature.
Chapter 3-2-2 Region of Interest (ROI)
For D1 and below resolution, ROI feature can apply to the main video stream.
Main video stream remains the biggest video resolution such as 1080P. The
sub-stream can be cropped and scaled based on the main video stream for saving
bandwidth and storage.
Chapter 3-2-3 Control Panel
Control panel buttons are described as below:
Snapshot: Take a snapshot of the video.
Audio on: Set audio on (for audio model only).
Speak on: Speak to remote site (for audio model only).
Recording at PC
Activate alarm output (for alarm model only).
Auto Pan for presets at ePTZ or ROI mode
Home position for ePTZ or ROI mode
Presets Presets recall for ePTZ or ROI
Perform left, right, up, and down operations.
Main Video Stream: 1920 * 1080
Sub-stream:720 * 480

13
Perform zoom in and out operations for ePTZ or ROI.
Speed The PTZ speed of above operations.
Chapter 3-2-4 Two-way Audio
For two-way audio, please click on Microphone icon for speaking to the remote
site. To stop speaking to the remote site, please click on Microphone icon again.
To listen to the remote site, please click Speaker icon for listening to the remote
site. To stop listening to the remote site, please click on Speaker icon again.
Chapter 3-2-5 Record in a Local PC
To record into a local PC, please first right-click on LILIN Universal ActiveX control.
It shows up in the setting dialog box. A user can specify recording path and
recording size. Please make sure that the ePTZ or ROI feature is unchecked for
displaying recording setting dialog box by right-mouse-click.
To playback the AVI video, simply click on Windows Media Player.
Chapter 3-3 Configuration
H.264 FULL HD IP camera’s administrator can configure H.264 FULL HD IP
camera via standard HTML web page. This chapter explains the detail of each
configuration setting.
Note: Only IP camera models with audio can support this feature.

14
Chapter 3-3-1 Server Settings
Server settings contain H.264 FULL HD IP camera server’s system information
such as MAC address, firmware version, users, system timer, and other system
settings. To change or to use these options, please follow the instructions at this
section.
Firmware Version
Firmware update allows a user to upgrade H.264 FULL HD IP camera’s
firmware remotely. Auser can use firmware version to verify if the device has
the latest version.
Device Name
The device name can be used by IPScan utility to identify the H.264 FULL HD
IP camera To change the device name, enter the name for H.264 FULL HD
IP camera and click on Submit button.
Language
Language setting can be changed dynamically.
OSD Name
Camera OSD name
OSD Time
Camera OSD time
ActiveX OSD Name
Camera OSD name on only ActiveX

15
Chapter 3-3-2 User Settings
There are ten user accounts allowed for the system. Each account can be
configured for its access rights. To add/edit a user, please click onAdd/Edit
User button. To access H.264 FULL HD IP camera without authentication, set
Bypass Logon radio button to ON.
To change account name, please type new account name in Account edit box.
To change new password, please type the new password in the New Password
edit box. Click on Submit button to update the user settings. To delete a user,
please click on “Remove User” button.
Administrator: Enable or disable setup mode for a user.
Panel Control: Enable or disable Control Panel for a user.
ePTZ: Enable or disable ePTZ feature for a user.
Streaming: Enable or disable a streaming for a user.

16
Chapter 3-3-3 Timer
H.264 FULL HD IP camera allows a user to change system timer via standard
HTML web page. To change H.264 FULL HD IP camera’s system timer, please
enter the date and time in the edit boxes. Click on Submit button to apply this
operation.
Synchronize with NTP
To synchronize Internet time system, check Auto Synchronize option to “Every
Hour”. H.264 FULL HD IP camera synchronizes its system timer with a time
server every hour.
Chapter 3-3-4 System Setting
Load Default feature allows to load manufacturing default. There are certain
critical settings such as IP addresses and video system which are not affected by
this operation. To reboot H.264 FULL HD IP camera, click on Reboot System
hyper link.
To update firmware of H.264 FULL HD IP camera, please click on Firmware
Note: Network Time Protocol feature requires Internet connection.
Note: In case of forgetting password, the device is required to send back to our
company for a manufacturing default or read appendix for emergency default.

17
Update hyper link. Locate “flasham.bin” in your computer by clicking the Browse
button. Click Submit button to finish firmware upgrade. To ensure the quality
of transmission, please make sure that there is no user accessing H.264 FULL
HD IP camera during firmware upgrade.
Chapter 3-4 Network
H.264 FULL HD IP camera provides Internet protocols including IP, DHCP, and
DDNS. A user can configure these Internet protocol settings. To setup above,
please read the following sections:
Chapter 3-4-1 General Settings
Network general settings are the basic settings connecting H.264 FULL HD IP
camera to the network. The default IP Address of H.264 FULL HD IP camera is
192.168.0.200. A user can use this IP address to verify the network connection
between a local PC and H.264 FULL HD IP camera using Internet Browser.
For local area network configuration, please enter, at least, IP address, Subnet
Mask, and Gateway IP. Click Submit button to update these settings.

18
For Internet access configuration, please contact your local ISP for global IP
address. Once the physical Internet connection gets installed, enter IP address
(global), Subnet Mask, and Gateway IP from the ISP.
• Default DNS IP Address—First Domain Name Server, the IP address of the
domain name server
• Second DNS IP Address—Second Domain Name Server, the IP address
of the domain name server, a backup DNS server for default DNS
• PPPoE Account—Account name of PPPoE service
• PPPoE Password—Password of PPPoE service
Chapter 3-4-2 DHCP Setting
Router, gateway, or other software DHCP servers can dynamically assign an IP
address to the H.264 FULL HD IP camera. There is no need to configure IP
address, subnet mask, and gateway. Since the DHCP may assign a different IP
address to the H.264 FULL HD IP camera after power off, a user can use IPScan
utility to launch Internet browser for searching H.264 FULL HD IP camera. To
enable DHCP, click on DHCP option and click on Submit button.
Note: Once the DHCP option gets enable, IP camera of the IP address assigned by
DHCP server. This feature allows only in LAN environment.

19
Chapter 3-4-3 HTTP & RTSP Service
HTTP protocol is a reliable protocol for sending video streaming. Port
forwarding technology can be used for sending video over Internet. The detail is
described in the appendix. For changing HTTP service’s port number, please
consult available port number from your network administrator. Change the port
number at the port field and click on “Submit” button.
Chapter 3-4-4 SMTP Service
Alarm or motion notification feature can send an alarm or motion detection
snapshot to an E-mail account. To enable alarm or motion sending E-mail
feature, please setup the following email accounts.