Logitech G735 User manual

G735 HEADSET |CASQUE G735
Wireless Gaming Headset
Souris gaming sans l
SETUP GUIDE |GUIDE D’INSTALLATION

ENGLISH......................3
FRANÇAIS....................12
ESPAÑOL ....................21
PORTUGUÊS ..................30

3 ENGLISH
Bluetooth®Connectivity/
Active Source LED
Power, Battery,
Charging LED
Bluetooth®Connectivity/
AUX & LIGHTSPEED Toggle
Power Button
Audio Mixing
Source A (Bluetooth®)
Volume Roller
Audio Mixing
Source B (AUX/LIGHTSPEED)
Mute Toggle

3 sec
3 sec
4 ENGLISH
SETUP INSTRUCTIONS
1Insert the microphone connector into the port on
the left ear cup. It is designed to t in one way.
2Turn on the G735 headset by pressing and
holding the power button located on the left ear
cup for 3 seconds.
3Insert the LIGHTSPEED receiver, with extender
and cable into the PC USB port. Receiver can be
used without the extender and cable by inserting
it directly into a USB port if desired.
4Download and install G HUB software to
yourPC/MAC for the best gaming experience
(GHUB has onboarding story for features).
Gotowww.logitechG.com/ghub
1 2
3
4
www.logitechG.com/ghub

3 sec
3 sec
5 ENGLISH
BLUETOOTH®CONNECTIVITY
1Turn on the G735 headset by pressing and
holding the power button for 3 seconds.
2Press Connectivity button to select
Bluetooth®– the indicator light above
willturn blue.
3Press and hold Connectivity button
for 3seconds to initiate pairing mode.
Thebluelight will ash quickly for up to
3minutes.
4Follow Bluetooth®connection for
yourdeviceto pair with the headset.
1
3
2
4
3 sec
3 sec

6 ENGLISH
Volume
Adjust volume with the roller on the leftearcup.
This adjusts the headset’s total volume,
notthevolumes of your sources.
Mute/Unmute Microphone
Press the mute button located below the volume on
the left ear cup. This will mute the microphone.
When muted, the cosmetic RGB will temporarily
ash red.
There will be a mute sound notication.

7 ENGLISH
Audio Source Options
G735 can connect to and mix multiple audio sources
at once:
- LIGHTSPEED audio
- Bluetooth®audio
- Auxiliary audio via 3.5 mm cable (not supplied)
- LIGHTSPEED + Bluetooth®
- Auxiliary + Bluetooth®
Toggling LIGHTSPEED/AUX & Bluetooth®
After connecting to both LIGHTSPEED and AUX,
togglebetween LIGHTSPEED and AUX options by
pressing the connectivity button on the right ear cup.
When LIGHTSPEED is active, the LED light above
thebutton will light up cyan for 5 seconds.
When AUX is active, the LED light will light up white
for5 seconds.
AUX only available when a cable is connected.

A
B
8 ENGLISH
Mixing LIGHTSPEED/AUX & Bluetooth®
After connecting to 2 sources LIGHTSPEED or AUX,
and Bluetooth®:
- To adjust source balance, press the up and down
buttons on the right ear cup to paddle.
- Pressing up increases Bluetooth®source
- Pressing down increases the active source
(LIGHTSPEED or AUX)
- To reset to equal levels, press and hold both
buttons for 3 seconds.

3 sec
3 sec
9 ENGLISH
Powering O
Turn o G735 headset by pressing the power button
on the left ear cup for 3 seconds.
The headset lighting will turn o after a short
lighting animation. There will be a sound
notication indicating power o.
If the headset is inactive for 10 minutes,
itwillautomatically shut o.
Checking Battery Status
To check the battery status, short press the power
button on the left ear cup.
The LED will be:
- Green when it’s over 30% battery
- Red when it’s under 30% battery
- Blink red when it’s under 15% battery
= >30% battery
= <30% battery
= <15% battery

2x
2x
10 ENGLISH
Lighting ON/OFF
To turn o the cosmetic lighting, double press
thepower button on the left ear cup.
Charging the Battery
Plug the USB-C cable into the port at thebottom
ofthe left ear cup, located between themicrophone
and AUX connector ports. Connect the USB-A end
into a USB port on a PC or USB charging adapter
(not included).
The power light will illuminate green and pulse
whilecharging.
The power light glows red for low battery (<30%).
The G735 headset ships with about 60% charge.
Werecommend charging completely before use.